Naturalistic orchid mantis terrarium

Mini World Craft
6 followers
8 Video Views·Mar 26, 2026
AI Generated·May contain errors
This tiny insect is known as the orchid mantis, and despite its beautiful appearance,
it's a lightning-fast hunter and a deadly predator to any insect that crosses its path.
Orchid mantises are one of the most popular mantises in the hobby,
and today I'm going to be making mine a brand new naturalistic enclosure.
Before we begin, if you're new, make sure to hit that like button,
and subscribe so you don't miss future videos.
The first thing I need to do is make the enclosure itself using a couple panes of glass.
This glass is about an eighth of an inch thick, and will work perfectly for this build.
To start things off, I used my ruler and lined it up with the edge of the glass,
and then used a tape measure to double check my measurements.
Once that was confirmed, I went ahead and scored the glass.
After scoring, I could simply snap off the excess.
I then repeated this process multiple times, ensuring that I get accurate measurements,
and making sure to cut all the necessary pieces to build the tank.
After cutting all the main pieces, I went ahead and took one of the sides of the tank,
and cut it into three separate sections, making the door.
The process is identical to cutting the rest of the glass,
by lining up the ruler, scoring the glass, and snapping it along the edge.
With the door pieces cut, I cut a couple more strips of glass to go on the top of the tank.
With all the pieces cut and labeled,
I went back with a little bit of wet sandpaper to sand some of the edges down.
As of right now, the edges of the glass are very sharp,
and there won't be any sort of border around this tank,
so I want to make sure that I get this taken care of to avoid cuts in the future.
After that, I went back with a little bit of isopropyl alcohol,
and wiped down each piece to remove dust and debris, and clean up the pieces.
After thoroughly sanding and wiping down each piece,
I could finally start assembling the tank using a little bit of painting tape.
Having all the pieces labeled really helps for a cleaner building process,
and allows me to lay things out in a nice, organized way.
Once the tank was fully assembled, I came back with a little bit of 100% silicone
to seal everything up and hold it together.
I applied an even bead along the seams of each pane of glass.
Then, using my finger, I went along the bead to smooth everything out.
For the door, I wanted to try something that's a little bit different from what I normally do.
I originally saw this technique used by Terrarium Designs,
and it utilizes silicone as a hinge.
To do this, I laid the door onto the tank, and used some painting tape to hold it in place.
I then used a couple cardboard spacers to place in between the door,
and the other pieces of glass.
I then ran a thin bead of silicone along where the door connects to the rest of the tank.
After that, I came back and smoothed it all out,
ensuring to cover the side of the door, and a good amount on the tank itself.
Once that was cleaned up a bit, I allowed everything to cure overnight.
The next day, all of the silicone was cured,
and I could remove the spacers, and start taking off the tape.
Using painting tape to assemble these kinds of tanks makes this process very easy.
After taking it off of the main tank, I could take it off of the door to see if it really works.
When I saw this technique, I had my doubts about it,
but it actually works surprisingly well, and is a total game changer for these types of tanks.
I've tried many different door methods in the past, and I've had very little success.
However, this one makes it really easy, and is surprisingly strong.
Anyway, now that the tank is cured,
I went back and removed some of the excess silicone to clean things up a bit.
Once that was complete, I could address the ventilation on the top of the tank.
For this, I'll be using a piece of window screen mesh,
and I'll go ahead and set the tank on top of it,
and then use a pair of scissors to cut around it.
Once the piece was cut, I went ahead and applied a little bit of silicone
to the underside of those overhangs.
Then I went and inserted the piece of mesh into the tank.
After that, I started pulling at each end of the mesh, trying to get it as tight as possible.
I'm alright if it's a little bit loose and sags in areas,
but this will be a primary molting area for the mantis, so I want it to be as tight as possible.
With the ventilation taken care of, there's one other issue I need to address,
and that's that the door doesn't have a way to stay shut.
This is a simple issue to fix, and to do it, I'll use a couple small neodymium magnets,
and use a little bit of silicone to put on the sides of them.
Then I'll go ahead and attach those to the tank,
right where the door and the other pieces connect.
With the tank fully complete, I can move on to the background using a couple cork flats.
Starting with some larger pieces, I started placing them into the tank,
before deciding to add a little piece of coco fiber liner for a little bit of extra texture.
Once that was in place, I could resume adding the pieces.
For the background on this build, I wanted to do something similar
to what I did for the dairy cow isopod vivarium.
I really had a fun time making that background,
and it was a fairly simple process that ended up with good results.
The cork bark has a very natural look, and is great for layering and creating depth.
After working with the background a bit, and once I was happy with it,
I could move on to the actual scape using a couple scrap pieces of wood.
I started by placing the largest elements in first.
To be honest, I didn't really have a plan for this scape,
but one important thing to keep in mind when doing scapes for mantises
is to allow for adequate molting space.
With this in mind, I continued scaping,
and eventually got something that I was almost happy with,
but I felt that it was missing something.
I had a couple pieces of spiderwood that almost looked like vines,
so I attempted to weave them around the scape,
and create a sort of dry vining effect.
I wasn't sure if this would work or if it would look good,
but after working with it for a while,
I ended up with something I was very happy with,
and the vining effect really works for this.
However, as of right now, everything is very fragile,
so I'll go ahead and secure it in place with some more silicone,
and use my finger to smooth it out, and push it in between the pieces.
In order to hide this, I'll sprinkle a little bit of coco fiber over it,
and push it into the silicone.
Then I'll repeat this process throughout the tank,
applying this technique to any contact points.
For some of the smaller connections like where the wood pieces touch,
I'll use a little bit of cotton ball,
and some super glue to help secure these pieces together.
I'll use a little bit of sand to help hide this,
and then I'll repeat the process on other connection points.
After allowing all that to dry overnight,
I finally had a completed scape,
and I couldn't be more happy with it.
Although I originally didn't have a plan for it,
I think it turned out great, and I'm a huge fan of the vining look.
Anyway, the next order of business is the false bottom.
To do this, I'll start by using a little bit of leaka.
Not only will this create a sturdy foundation for the false bottom,
but the clay pebbles will also absorb some of the water,
allowing for a more effective false bottom.
With the leaka in place, I added a piece of window screen mesh
to act as a substrate barrier.
For the substrate, I'm using a custom ABG mix,
consisting of one part coco fiber, two parts sphagnum moss,
a fourth part charcoal, and a fourth part reptile bark.
With all the components added, I thoroughly mixed everything,
giving me the perfect substrate for this build.
I then started adding it into the tank,
moving it around and leveling it out as I go.
While doing this, I'm making sure that there's an adequate amount of substrate,
as I'm going to be heavily planting this area.
I also made sure to slightly slope it up towards the back
to help create a sense of depth.
After adding in all the substrate, I could finally move on to the plants,
using a couple tropical plants,
and of course, you can't have an orchid mantis terrarium without the orchid.
Before adding these, however, I need to do a couple things.
The first order of business is to remove each plant from its pot,
and break up the soil from the roots.
I repeated this process with each plant,
making sure to get as much soil off as possible.
Once that was complete, I took all the plants over to the sink,
and started washing off the leaves, as well as any remaining soil.
Then I went and soaked them in warm, dechlorinated water for 20 minutes.
Prepping the plants like this is super important,
as mantises are super prone to pesticides
and other harmful things commonly found on plants.
Anyway, after allowing the plants to soak,
I could finally start planting, beginning with the largest element.
That being the orchid, I decided to place it in the right side of the tank.
Initially, I wanted to add the other orchid right next to this one.
However, it was just too big, and didn't end up working out.
Also, as you can see, the orchids are a bit floppy,
so I used the mini clips that they came with to help hold them in place.
After planting the orchid, I decided to add one of the umbrella plants
to the left side of the tank.
This will help break up the color and texture,
and is a very sturdy plant for mantises.
Right underneath the umbrella plant, I added a small amount of China Doll.
This will help further break up that texture, with its small, sharp looking leaves.
Then right next to that, I added a little bit of Fotonia Pinkbane.
This will break up all of that green color, and add a much needed pop in texture.
I also added one of these to the right side of the tank,
before coming back with a little bit of moss, and placing it underneath it.
I then went ahead and added more moss in various places underneath the plants.
Not only does this look good, but it also helps keep humidity up.
After adding the moss, I came back with a couple cuttings of Ficus,
to add a bit more detail.
I mostly placed this wherever the moss was,
but I did end up coming back and placing some in and around the scape.
I find Ficus to be a very good plant to add detail to setups like this,
as it grows fast, and is fairly hardy.
Anyway, to top things off, I added a little bit of leaf litter towards the front of the tank.
I then came back with a couple small botanicals, to add a final bit of detail.
I also decided that the scape was a bit bare,
so I used a little bit of super glue, and attached an airplane to the scape.
All that's left to do is mist everything down,
and introduce the mantis into its new home.
Though I have made many beautiful mantis enclosures in the past,
this one is by far my favorite.
Orchid mantises are one of, if not my favorite mantis,
so I wanted to go all out with this one,
and do it a bit differently than I did my other ones.
Having that mindset allowed me to create a setup like this,
that I think is truly beautiful.
I'm not sure how the orca will hold up long term,
but as of right now, the mantis is loving it,
and you can see that orchid camouflage working its magic.
It truly amazes me how nature is able to do this,
and I wanted to give the mantis that ability in this setup.
One other thing that I really love is how the door turned out.
Honestly, I was very doubtful for it at first,
but it ended up working out extremely well.
Even after seven years of doing this stuff,
I'm still learning new things,
and I'm glad that I found out this technique.
All in all, I'm extremely happy with how this setup turned out,
and I hope to make more like it in the near future.
Anyways, that's all for this one.
Don't forget to hit that like button,
subscribe,
and I'll see you all next week.
