Super Tune Your LIFT - Custom TOP HATS!

Defending with Past Crossbows
3 followers
Mar 21, 2026
Super Tune Your LIFT - Custom TOP HATS!
AI Generated·May contain errors
Comments are disabled for this video.
Why are you so frustrated?
Filled point to go through paper and make a hole and I can't get it.
And I'm done. So I give up. So you're good. I'm bad. You're tall.
I'm short. You're strong. I'm weak. You're good looking.
Well, if it's in, you're not attractive. I'm good looking. You're not attractive.
That's how that goes.
This is not a problem that is uncommon actually, especially on the 29 and a half.
So we've seen it a lot of times.
Uh, so much so that I like asked them if they would make different ones and they
said they didn't really want to, um, but they let me,
so I made you a different set of top hats to solve this problem for you.
So wait, wait, wait, top hats guys.
If you've done top hats or you're on a tuning group on Facebook and you're
getting all confident, you want to move the lean of the cam.
And have you ever been to the point where like you move it, you shoot,
now you got a point left or a tail right.
You move it the other way and it goes the other way. It's the opposite.
Now in all fairness, I hadn't seen that before this year.
I was almost always able to do top hats and get it to shoot a hole without ever
touching the rest. And this year that changed. They went to a shorter limb,
the cam over assembly, everything's a little more rigid. And those,
those movements make bigger changes in the wheelie. Yeah.
And like I saw it immediately, I saw it in titles, but it wasn't as bad.
And then when the lifts came out,
I seemed to see it more and more and more.
And we'd have ones that you literally just couldn't get a perfect hole out of.
And they're the shorter, this is the worst it's going to get.
Everything's amplified, right?
So this might not be as relevant on a 33 and it wasn't nearly as relevant on a
title, but if you want to be able to move it a really finite amount,
each of these is 20,000ths movement, right?
So you're moving it from one way to another by 20,000ths of distance.
So I just made ones that are tens, half, half. So 0.5s or whatever.
Check out my holes and tell me what you think. Okay.
So what you're looking at is my first tear. So we had tail left point,
right? However you want to do your nomenclature or vernacular.
It doesn't matter to me. And then, so this is a 20,000th change.
This is one 20,000th change. And some would look at that and say, Oh,
that's perfect. It's not, it's slightly point, right?
And if you close the hole, it's a little easier to tell.
And if you put a circle on like you got your black Sharpie,
mark that there, you can now tell that hole's not in the middle, right?
It's slightly to the right still. And what's going to happen.
If we put a 20,000th on here, it's going to be left.
Yeah. It's not going to hit the middle, right?
Cause it's making bigger movements than the tune could possibly operate.
So then the guy would change, move his rest.
Then the guy would be forced to move his rest. So because, well,
because I made those, we can probably get away with it.
So we'll try the ones that are 10,000ths difference between this one and the
next one and see if that resolves it.
Are you going to lean the cam further towards the hole?
This is a increase the lean. So on a right-handed bow,
you would move the cam to the left. Yeah. Well, if your knock is left,
you move your cam left. If your point is right, you move your cam left.
So it's, it's the easiest way to say it for them to remember. Yeah. Okay.
So knock. So whichever direction your knock is, is which way you move the cam.
So if your knock is, if your knock is left to your point,
you'd move your cam farther to the left. Cool. Not everybody's bow rain, man.
Okay. Come on over. Let's do this. I just have to do like that.
Although I think that's bigger. I guarantee it's bigger.
It's the short man thing again. Can't help it. Give me the biggest one.
If you were six foot, it would be different, but you're like six, nine or so.
Where's your block to stand on? Nope. Nope. We have, yeah,
these are,
these are actually production runs that haven't been to the laser yet.
This is first looks. Yeah. I've not, I've not touched.
I've not put one of these in a bow period. You get the first game you pig in
between the second and third set that they make.
These will all be laser etched on the sides so you can identify the ones and the
twos, just like they do with the black ones.
What if our camera guy got the macro lens and got a real tight view while we're
having this conversation and I could do this. So when these are completed,
but we know we kind of rushed it here. This would be done a day or two.
There'll be white laser etching on here with the one and the two.
So you can easily see it and you'll be able to also get a master kit,
which is all the ones that would normally come in a master kit plus these.
And I'm reanalyzing those in different colors too.
That would be great. Yeah. So the actual blues go together.
Reds go together. Greens go together.
That kind of thing instead of just all being black and hard to see the laser
etching in here, the cutting in here is, is good. It's just at a glance,
it's difficult to see. Whereas if they're all just different colors,
it'd be easy to match. So I was like, well,
if I'm going to do it, I'm going to do all of them. So you can have a kit.
In any event,
we're going to put two of these in here and replace those and see if we can
actually get a little touch of the rest. Let's do it. Fingers crossed.
We have not tried this yet. So, all right, I'm going to be my third hand here.
Sweet. Okay. So we need the bigger one on the right,
which this one's the bigger one. If they had laser etching on them,
it'd be easier to tell. And it's not that different, but it's just 10 thou.
Right? So you can look at it and see it in theory. We'll see if in theory,
we'll see if 10 is a small enough amount. Cause once again,
I never even tested these. I just said, screw it. I'm going to do it.
Make them. I'm going to do it. I have that tendency.
I have made a thing or two that didn't go well and I ended up having to eat it.
So, but part of the deal,
the nice thing is your job board is finally in stock. Uh, no, it's not.
We're waiting on packaging still. They're supposed to be in Tuesday.
I have everything that I've already sold built. It's just waiting for packaging.
So those will go.
And then I have another 30 or 40 that'll be available shortly after that.
So mine's a virgin pretty, like I've only used it a few times. Yeah.
And so guys, when yours,
like there's going to be some little metal coming out in the beginning,
can you explain what that is?
Yeah, it's, it's just wearing through the thread a little bit.
And if you ever get any chatter in it,
you need to put white lithium grease on the thread. Bingo. That's it.
And it's simple as that. Okay. That looks about right.
So this is a 10 thousands movement more in the appropriate direction.
Let's see if after I put this screw on, if this resolves it,
you want to work out before we podcast, right? No, I do not.
Come on over friends. Yeah, dude. I am so,
I don't know why that makes me so pumped. Yeah, dude, you guys,
do you understand? Like my rest is set 13 sixteenths off the riser.
If Josh hadn't invented this, I would have had to succumb.
I don't know if you can say I invented it.
I actually asked them to do it as their product,
but they didn't want to make them, but they said I could. So I'm not,
I didn't invent anything. I just made them different thicknesses. Not fair.
So why won't my lift tune?
It's because I didn't have the micro adjust top hats now available.
Josh's website. If you're going to buy it from Josh, use my discount code,
elk shape. It'll save you money. That discount code will not work on my website.
I will upcharge you cause I have to.
So the reality is you're going to buy it over at Josh's and um,
okay, dude, I'm actually going to like, like I'm as your friend,
I'm effing proud of you right now. This is awesome.
This is going to help a lot of you who have been where I was to be in this
video. I legitimately was frustrated.
Yeah. Now just to clarify the top hats actually fit everything from Halon
forward. So with the exception of a Stoke Prima, the,
the ladies bows are the shorter ones. Um,
but everything that has the normal limb width like that and all the way up into
the titles, they fit in the titles too. It's all the same top hat.
So you can use these all the way back to 10 years ago. Damn near God.
It's been the same part the whole time.
That is like the best tear now. Am I done? No,
I have a iron will wide one 25.
I have a Bowmar practice head and I have a bear
shaft with electrical tape on the end. I'm going to order another core for three,
six, five. I'm going to tear it up.
I'll just get a field point and a broad head.
But if you don't want to tear up your target,
you can do the bear shaft deal or whatever. Um, this is your starting point.
This is not the end all be all.
No get it to here and then start shooting a broadhead and a field point and see
where they go or shaft tuning. Just make sure if you're doing your shaft,
you're adding the weight to the back. So you're doing the same thing.
If you do it without the weight, it won't hit in the same spot.
Separation is in the preparation. We'll catch you on the next one.
Sorry guys. Josh left. I'm going to shoot some stuff here at 40.
Let's start with the iron will wide single bevel true to left
at 40 yards beast practice head.
Also, I didn't adjust my left and right.
We moved my rest back to the center shot, which is good.
I'm going to be able to move my site to the left a little bit cause it was kind
of a little bit behind the riser. Y'all know what I'm talking about.
Touch high, a little more to the center.
Let's do another field point right next to the iron will.
All right guys, I gotta go eat dinner.
I want to finish this video last round.
I'm going to move my site a couple more clicks to the left.
There's five clicks to the left, 40 yards.
I'm well wide one 25 single bevel to the left 40 yards. Here you go, son.
Yep. Okay. So like I said on the video in the studio,
if you don't have a broad head target that you want to tear up,
all you got to do is get yourself some electrical tape,
rip your veins off, get the electrical tape,
get the arrow to weigh the same as your fletchies and shoot it.
I don't start at 40. It really, the bear shaft really exposes your tune.
So if you have center shot like I do perfectly 13,
16 and you've top hat or whatever,
and you start at 20 and your arrow, your field points bullet,
but your a bear shaft is way left or way, right.
Something's off with your tune. So check a bunch of things.
If you're are going to move your rest, like your broad head tuning,
do it the exact same. Start at 20 yards would be in my advice.
I am using the iron will wide single bevel one 25 and I have three of those in
my Matthews one piece quiver. And then I have two beast broad heads.
So five arrows total primary.
So 70 yards would be my max range with those.
I plan on shooting elk under hopefully 60, hopefully under 50,
hopefully under 40.
But basically like my primary first shot on an elk is going to be without wide.
If I get a followup shot,
I'm taking it and I'm reaching for the back with the beast 2.0, one 25.
Both of those are in the bullseye. I'm going to go pull those right now.
Finally in today is 101 degrees here in Spokane.
If you're practicing with the same components that I am and you hot melted them,
be careful on a hundred plus degree day in a brand new target like that three,
six, five down there. And you go to pull your broad head out.
It could be stuck in the target. That's a pro tip.
That's actually an amateur tip, but I appreciate y'all. I love y'all.
Bow hunting season is here. Separations in the preparation, Josh,
and I will catch you on the next one.
