TMC FcPC v5 Setup - Better than AVS?

Ballistic Lab
1 follower
6 Video Views·Mar 16, 2026
Timestamps:
00:00 Intro
00:17 Quick Overview
00:40 Base Carrier
01:25 Rear Platebag
03:43 Left Cummerbund
05:16 Comms Setup
06:58 Right Cummerbund
08:24 Front Plate Bag
11:33 FcPc vs AVS
11:55 Quick Belt Overview
12:43 Outro
AI Generated·May contain errors
Hi guys, welcome back to another video on my channel. Today we're gonna break down my new
FCPC setup. So for those of you who don't follow me on Instagram, which you should do by the way,
I sold my ABS to a British guy and I bought myself an FCPC. So just a quick 360. This is the front,
the left side, back and the right side. Now that the TikTok LARP microwave is over,
let's actually get into this play carrier. The carrier itself is a replica FCPC V5 from TMC in
green together with the TMC cummerbund and a TMC back panel as well. Now, why did I buy a green
play carrier just to put it out in multicam again? Well, someone DMed me saying that they have this
lying around and they only paid 105 bucks for the entire carrier plus cummerbund, green side
plates, the back panel, a dangler and a admin pouch. So, you know, it was a steal of a price
and I didn't really care about it being, you know, multicam. I just wanted something that
is good quality, which TMC is arguably. Let's start with the back side and then work our way
through the cummerbunds all the way to the front. On the back of my carrier,
I have my roll one. As on my AVS, this is just filled with some basic medical stuff,
you know, to just care for basic wounds until actual medical professionals arrive.
Then right here is another replica tourniquet just for the LARP, because again, when you're a medic,
you sometimes need a tourniquet to revive a teammate. Then on the back panel here,
this is the banger back panel from TMC again with a nerf patch because Evangelion is based.
In here, for now, I just have a Germany flag based. This is the same flag that was on my
AVS before. If I find anything I want to put in here, for example, for longer games,
water or something, I will probably just mount this on the outside. I'll just need to figure
out how to do that the best way. Either along the side here or in between the pouch and the
bangers just tucked in here and then tied down to the sides, which might look wonky,
but it will work. That's that. And then up here, we have 3D printed flashbangs. Shoutout Luca,
friend of mine from the Italian Irregulars, follow us on Instagram, link in bio. These are
flashbangs that work with these little caps that you put into like costume or cosplay revolvers
and you just simply prime this and screw it in. This thing right here prevents the
unlocking of the mechanism and then when you take it out and throw it,
you can't really hear it that well, but it unlocks. Teammates can access these quite easily, but also
I myself can access these really easily, which is pretty cool. And it's way faster than, you know,
opening up a pouch or something. I can just grab to my back and pull out a grenade, which is pretty
cool. And since I don't need a space for anything else, I have three bangers on the back here.
Now, why did I remove the water source? Well, for shorter games, I don't really need water and even
if I'm on longer games, I can just carry water in like a pouch on my pants or in a GP pouch.
I don't really need to have a drinking straw because again, that tends to get dirty and
it's bad to clean and I don't need to be drinking on the move. Moving to the sides,
on my left side, I again have the tourniquet, my Pew Tactical side plates just for the looks and
also to help the Cameraband distribute some of the weight to my sides and not just load everything
on the shoulders, which works surprisingly well. And then up on here, again, my DM gear,
little GP pouch from AliExpress, which houses my multi-tool, which is useful for many purposes.
Most important about this is that I can use it to reassemble and disassemble my gun
before and after a game day because the way that I transport my gear, I need to disassemble my gun,
the upper and lower, so that it fits into my bag because of the length of the bag. And then
in here, just a cheap, actually Bundeswehr merch flashlight, just if I need another flashlight
because I have a really bright one on my helmet. I had a better one in here once, but I actually
lost that during my time in the Bundeswehr on a night land nav course or rather race, so it was
fun to jog through the complete darkness at 2 a.m. for like the rest of like 10 kilometers.
Definitely can recommend. Anyways, as you can see, I went for a Velcro Cameraband. I know I used to
hate on Velcro Camerabands, but what I found is that these are way easier to adjust. I have one
side tucked in always, as tight as I can, and the other side I can, you know, tuck it in a little
bit more if I just wear a combat shirt or less if I wear, for example, a little bit puffy of a jacket,
so that is something that Velcro Camerabands allow that QD attachments don't allow as easily.
And then moving up front here is my comms setup. This is a Baofeng UV32, not the digital version,
just analog, with a Baofeng PTT, a different one. I'll probably make another video about my comms
setup, but brief rundown is I have some padding on the inside of the pouch that I glued and
zip tied on here, just so that the radio doesn't press into my ribs that much,
so I can actually fit the plate carrier Cameraband tighter to my body,
so it doesn't wiggle around when running. The basic antenna that comes with it,
I have the PTT cable secured via Velcro zip ties that also help to hold it down to the carrier,
so that when I put it on and off, it doesn't wiggle around or fly around as much.
And then the PTT is mounted via just basic bungee into the MOLLE. I will put a close-up
on as well. And as you can see, I mutilated the actual MOLLE clip just to get it to sit more
flush. The reason why I mount it this way with the PTT button on the outside is because otherwise
my sling, especially in CQB environments, because I just have it hung around my neck,
tends to bind up on the PTT button and I would just hot mic 24x7, which is annoying and stupid.
And the reason why I don't have it on a PTT wing, but rather with bungee, is so I can angle it up
for speaking, because these PTTs aren't necessarily the best, so you want to be as close as possible
to this thing when speaking into it, so this bungee allows me to do just that.
A fixed PTT wing doesn't. If I get a PTT that works with my amps via downlead, then I'll
use the PTT wing, because I don't need to angle my PTT to speak into it anymore.
And then on the right cummerbund I only have a GP, I think, Spirit of Sepharo. I'll put it on
screen. I mistook it last time. And in here I just have batteries. Actually, last game my optics
died, so I had to replace the battery on that one. So, always have batteries on you. A hex key
multitool for fixing guns, re-zeroing optics, or whatever you could need. A lighter from a good
brand, because I don't want it to break, because sometimes in the field or on the airsoft field
you need a lighter to, you know, whatever. And then some zip ties in case I need them.
You never know when you need zip ties, a lighter, or electrical tape. I know, last time I said that
if you don't have electrical tape on your kit, what the **** are you even doing? I currently
don't have electrical tape on my kit either, because I ran out of electrical tape and I have
stuff ordered, but it's not coming until in a couple weeks. And then up here just the silly
trauma shears for looks, hopefully, because I don't want to cut up anybody's clothes because
they're wounded. One thing that I have to add is I used velcro zip ties to tighten down the GP pouch,
because otherwise, because this GP pouch was built for a three band cummerbund and this is
only a two band cummerbund, would flap around too much, at least for my taste. So yeah, zip ties.
And we've already arrived at the front. We'll start down here with just my tourniquet dangler
with a sharpie from Amazon in here. Again, just for the schlarp. Then right here is a ktor flap.
As you can see, I have two bungees here and one without. So I have a kydex insert in here,
but what I found is the ktor flap is kind of difficult to pull the magazines out and forward.
You can only pull them out, like upward. And with the heli strategic placard or other elastic
placards, you can pull the magazines into any direction you want and get them out. With the
ktor flap, this isn't the case. You need to pull them straight up to get it out fast. And with a
foam mount, you can imagine that it's quite difficult. So I only have one fast access mag,
because my fast reload either comes out of here or here. And all the other mag pouches are just
for refeeding these fast mag reload places. And then right here, I don't have any kydex inserts,
just bungee. So I can, when I use this mag, I can refeed this pouch. And I haven't tested this
in game yet, but I'm going to a game day in a couple of weeks and will test my theory. If I
find out that this is a stupid thought or idea, then I will obviously change it up again. Right
here is my lens wipe. I've added a ranger band around it for the simple reason that otherwise
what tends to happen is that the actual lens wipe tends to fall out, which I don't like,
because it gets dirty or just snags on things. And that obviously isn't the use case for this thing.
So I just have the ranger band on it. But if I need to quickly clean my lenses mid game,
for example, for my glasses, I have a little bit of cloth hanging around that I can just,
kind of press with my thumb onto the glass and clean my glasses. But if I need to have more time,
I can obviously pull out the entire lens wipe. And then up here is my FMA phone mount for an
iPhone X. But as you know, I don't have an iPhone X, I have an iPhone 13. So what I had to do
was add a little bit of foam here to hold my iPhone. The way I install it is just I
kind of like take it like this and then press it in and then upward so it gets
holed down by the edge right here. And as you can see, I had to upsize the hole for the camera,
because obviously the iPhone X only has one camera and the iPhone 13 has two cameras
diagonally. Now, what I also had to do is add a little bit of a aluminium plate in front of
and just to cover up the brown packaging tape I used to hold it down, I added some fake multicam
tape just to kind of make it look a little bit better. And since this entire carrier is a mixture
of multicam and solid colours, I personally think it fits quite well. On the front, you can see as
well our Italian Irregular's patch, our new team patch. Roughly saying,
death to all orcs, because we are fighting for Grondor. The LARP is live.
So yeah, that's the entire carrier. So far, I like it more than the AVS simply because it's less
bulky and weighs less. And in Airsoft, you don't need any weight distribution via the harness. So
I like this way more. Nonetheless, the AVS is still a great carrier and I have an interesting
video about the AVS as a plate carrier coming out soon. Now, one more thing I want to add before
we end this video. My double mag pouch isn't gone. It's on my belt right here. So I have my extra two
mags right here. If I don't need them, I can obviously take them out for shorter games where
I don't shoot as much or I can replace it with water even. And because I ran out of money space,
because I'm not that wide of a person and I still want to have my tourniquet and I don't want
everything bunched up together like really tightly. And I want this part of the belt free
so I can access the pistol better. I put the Idle Gear down pouch under here again with
lycra zip ties. To show you really quick. Here you can see lycra zip ties basically everywhere.
So get yourself some lycra zip ties. These things are stupid useful. So with that, I have nothing
else for you guys. If you have any questions about my kit or recommendations or just something you
want to talk to me about, comment them down below or DM me via Instagram. And until we see each other
next time, LARP.
