The new and “IMPROVED” Ravin R500? Is it better than before?

Defending with Past Crossbows
3 followers
1 Video View·Sep 11, 2025
The new and “IMPROVED” Ravin R500? Is it better than before?
Well it's back, the R500 from Raven.
The new one was supposed to be the R50, but as many of you know, the R500 had a recall
and it's really hard to pin them down on why it was recalled.
The best answer I can get from Raven, it was trigger issues.
However, that's not the issue I saw most in my shop, it was limb issues.
There was a few other miscellaneous things, but mostly it was the limbs.
Either way, there was enough issues with it that Raven issued a recall on the R500.
Many of you may have already sent yours in to be rebuilt.
So in the process of rebuilding, remanufacturing, and basically relearning, they decided, you
know what, we've figured out how to build this better and stronger, so we don't need
the R50 now.
So this is the new and improved R500, and the exact words they used to describe it to
me were bomb proof.
Well, we'll see about that.
All that coming up next on Trinity Wild.
Hey everybody, thanks for joining us today.
So like always, let's go through this brand new Raven R500, let's unbox it, build it,
let's see how it operates, and then we'll take it out in the field and see how it performs.
Wow, what a cool knife.
All right, out of the box, here we go.
We got our quiver bracket, you can see, super simple to put on, quiver, manual, instructions,
and a cool sticker.
Always got to have that.
Standard scope.
You can get this in the Sniper package that has a much better scope.
Scope rings.
This is your crank handle, looks quite a bit different than the other, you'll see why later.
Six R500 bolts, and most of your Ravens all operate on the same bolt, this is a separate
bolt.
You can't use your regular bolts you use with your R10, R20, with the R500 bolts.
And then there's the R500.
And you can see that sucker is narrow.
We'll go through how it operates.
It's also, most all these new ones are going to come, they've already been chronographed,
so this has already been chronographed at 505, so you get a pretty good idea to where
to set your scope.
This is not the E version, the E version comes with a battery right here.
I typically don't even sell those very often, to be perfectly honest, when you put that
battery on there, let's not even talk about that right now.
We'll get a little closer view on how it operates here in just a second, but that's how it lays
out.
I tell you, it can't get a whole lot more simple than that.
I got a splinter.
So the reason I like to do these videos this way is because I want you to see that this
is not something that's hard to do, even though that piece of machinery may be kind of intimidating,
putting it together and getting it ready to operate is really not that hard.
If you don't have a shop close to you, or even a big box store carries most of the Ravens,
you can order one online, of course I'll have a link below if you'd like to order one online,
or if you wanted to buy one and ship it to somebody, it's really not that difficult.
The reason I tell you that is if you've already bought your R-500 and it's already built,
you can skip this next part, you won't need it, you're already ready to go.
First let's attach the quiver bracket, all you're going to do is locate that hole, there's
two separate holes, you're going to put it in the front one, big screw right there, it's
going to go right down in here, and you can just finger tighten it.
So this quiver bracket is set up so your quiver is on the left-hand side and then your crank
handle is going to be on the right-hand side.
If you're right-handed, that's the way you want to set it up.
Then we're just going to get a screwdriver to tighten, and that's all there is to that.
Before I get any farther, make sure you remove that tag, be very careful, but make sure you
remove that tag.
You don't want that spinning around while you're trying to crank your crossbow.
All right, mounting your scope rings, I'm going to go ahead and take the top of the
scope rings off first, that's just four screws, and you'll just remove all those screws so
the scope ring's all the way open, just like that, do that with both.
Now this next part is going to be kind of personal to you.
Where I start these out, where I'm going to start the scope ring out, is going to be one,
two, three, four, five, six, seven.
That's where I'm going to put the first ring, and we're going to tighten that down, and
then from that one, I'm going to go six forward from there, one, two, three, four, five, six.
That's where I'm going to put the second scope ring.
Now certainly, to get the correct eye relief, you can move this backwards and forwards.
What that will do is mount your scope pretty much in the middle, still give you a little
bit of play, but you'll have to see where you need the eye relief so you can still move
it forward and backward.
So don't crank these down too, too tight until you get your eye relief where you want it.
That's where I'm going to start.
Now I'm going to put the top two pieces back on, put the other one on.
So as you're tightening it, don't tighten it so tight that you can't move it, because
I'm going to want to be able to level that up here in just a second.
So both of these, don't crank down on this too tight just yet, and don't crank down on
your scope rings too tight just yet.
All right.
So now, like I said, I've got it to where I can still move that scope just a little
bit.
I still want to be able to move it so I can get it leveled.
Install your fill points.
These fill points are all 100 grain.
It's a three arrow quiver, so we're going to pop all three arrows in, and number two,
and number three.
All set.
All right.
Installing the quiver into the bracket.
You're just going to push that down.
You'll see, and that right there is a heck of a spring, so it won't come out.
Put your two little knobs right there in that hole, so press it down.
Quiver's locked in.
Crank handle, you can place it either way.
I like to turn it with the handle part up, and it's just going to pop down in those two
teeth.
First time you put it in there, it's a little tough.
There you go.
All right.
So we got her built and ready.
That's how she looks.
So now I'm going to go get this scope leveled up and get it sighted in.
I'm not going to bore you with that whole process.
If you want to see how to sight one in, I'll put a link up above, up here maybe, to my
Sighting in Your Raven Crossbow video, and it'll work for this one, whether it's the
500, the R18, it won't matter.
After that, I'll meet you in the field, and we'll go through operation, and we'll see
how this thing does at distance.
I'm pretty excited to see that.
And while I'm thinking about it, if you're enjoying our content today, go ahead and hit
that like button for us, or maybe you have a friend that's looking to possibly buy an
R500, share this video with them, and maybe that'll help them make a better decision.
Those things are really going to help us grow our channel, and help us to bring you more
and more content.
Thank you all.
We really appreciate it.
All right.
So let's walk through operation on this thing.
To begin with, let's go ahead and take the quiver off, push the button, and you got to
get on that button.
Quiver pops off, crank handle comes out.
You'll see the crank handle looks a little bit different.
The operation on this crossbow is way more simple.
There's no worrying about a button.
There's no worrying about it.
If it comes out of your hand, it's not going to work like that.
This works on a drive here, and worm gears down the interior of the rail, and comes all
the way out to your rest, which is here.
So with this, all you're going to have to do, my trigger box right now sits all the
way back at the back.
You're going to take your crank handle, a little square spot in the back, and where
the square is, that's going to go right in there.
So all I do is lower, as you watch, you'll watch the trigger box coming down.
As I unwind, and it's going to come all the way down.
I can stop at any time.
It's not going to drop.
It's not tethered like a regular Raven.
It's going to march right down that worm gear as I turn it.
So as it gets to the bottom, you'll hear it click onto the string.
There it was.
Now, it's attached.
All I'm going to do is wind it back up, and you'll see how that's moving right back up.
Cranking this is a little more, the power it takes to crank it is a little more difficult
than the regular Raven.
More turns, and as you can see, the circumference of the circle you're turning is much bigger.
So there's a lot more effort to cocking this, and again, save the comments.
I know this is not where you're going to crank it.
Don't put it on your leg to crank it.
Keep your hand out from in here.
Put it on the ground and crank it, even though we don't have to worry about it coming out
of our hand or anything.
Still, do not crank it like this.
The only reason I'm doing this is so you can see it all the way back, and as you come back,
there's no fear of over-cranking it, because when it comes back, it stops.
There's no extra cranks or anything.
So right now, I'm basically sitting here with a bomb in my lap.
From here, just like the other ones, you've got an odd feather, so I'm going to place
the odd feather down all the way through the barrel, all the way down, and it's going to
click onto the string.
Hope you can hear that.
And you can see where that point is going to come.
It's not coming out the front.
It's going to stop right there at the front of that riser.
So just like the other models, I'm going to remove the bolt.
It's going to be attached to the string, so you've got to pull just a little, remove the
bolt, take the crank handle, place it back into the square, and now we're just going
to back it down, all the way down, until it touches the bottom.
And again, when you get to the bottom, it bottoms out.
You're done.
So that's the operation.
As complex and complicated as this looks, this is so, so simple.
Crank, wind, unwind, simple.
And just like with the other models, when this trigger box is down here on the trigger,
it can stay there indefinitely.
No need to worry about taking it off the string.
Leave it right there, and it's ready for your next hunt.
Wanted you to see my camera set up for today.
I left my tripod at the shop.
So this is my old tripod I used to use, and you can see, this is going to be a tough one,
but we'll get it done.
Now, since this scope is set up with just a 30 yard, 20 and 30 is about the same, we're
going to skip the 20 yard shot and just go right to the 30.
Here we go.
30 yards.
Man, I love the trigger, too.
The trigger's super crisp.
It's like shooting a rifle.
Let's go to 40.
40?
Yeah, that was pretty low.
Let's try that again.
I'm not sure if that was me.
Check my speed.
Speed's still at 505.
Let's try 40 again and see if that was me.
Same dot.
Huh.
Okay.
Well, I'm going to try 40 again, or better yet, let's go back to 30.
All right.
Let's adjust the scope.
Height's good.
I need to come back to the right just a little.
All right.
30 again.
That was me.
I pulled that just a little bit right.
So I think we're back on.
Let me gather the bolts and we're going to kind of start again.
All right.
I need to hurry up.
It's getting dark fast.
So let's start again at 30.
See if maybe my calibrations were off just a tiny bit.
Let's try 40 again.
All right.
That's better.
50.
Let's go ahead and lay that in the middle.
I'm having a harder time seeing that middle target, so 50.
Pretty solid.
Since I'm running out of light, I'm going to go ahead and go on back to 70.
I don't know if this mic is going to pick up from that far back.
70 is about as much room as I got.
It's getting harder to see, so I'm going to go ahead and put it in the center dot.
Wow.
Okay.
Is that way?
That's 70?
Goodness gracious.
All right.
I am pretty sure I had that 70 spot on.
I may, because of how dead center that is, I may have had the wrong dot on that.
I'm going to try that again at 70.
Okay.
Well, it did go left.
This was that 70 yard shot.
The other ones are pretty good.
The 70, there's no wind.
I made sure I had that on the spot.
This being the 70, that's a little disappointing, but I was disappointed with me too.
I couldn't decide, is the crossbow erratic or am I erratic?
The more I thought about it, you know what?
I think I know what was wrong.
This is what I was shooting off of.
Normally I shoot off a bench.
I don't know.
I think I was in a hurry that day, and I don't know why I didn't take my bench out there,
but I just used this tripod, which is normally fine.
As you saw, it shot pretty good out to 50, 60 yards.
However, the way this scope is set up with the dots, the 30, 40, 50 dots, I feel like
as I'm looking through it, if I don't have my face on there just right, it's almost like
a peep sight, like the peep's in the wrong spot in the string.
So I waited a few days and I said, I'm going to go redo those shots again.
And it took a while before I could get back to that field where I could finish the video.
I believe I said there too, that field is about 60, it's almost 70 yards long.
So I had to push everything back into the woods.
So I did that, and I brought my bench, put my bench on there.
And as you're going to see, the results are a little different.
You got the 30 yard shot, then it went to 50, then it went to 70.
Just a tick low, and I got tired of moving that thing and resetting back up.
So I just went on out to a hundred, and now you'll see what happened at a hundred.
First shot, second shot.
That's more like it.
Your results may vary.
You may be able to shoot off one of these way better than I can.
But you can see when I put that thing on a bench and shot that target, I do want to show
you one more thing.
One of the very few complaints I'm getting is the field points coming off in the target.
What's happening is that thing is spinning so fast, and especially at a hundred yards,
it hits the target and spins the field point out.
There's a couple of fixes for that.
You can put some Teflon tape on your field point.
I know that sounds crazy, but if you don't, you're going to lose some field points in
those targets.
But Easton also makes some match grade field points.
You'll need 11-30 seconds, a hundred grain.
That'll match what your Raven came with.
I'll put a link in the description below so you can pick up a pack of those if you want.
Now, they're expensive, but they won't spin out.
You saw the performance.
You saw the ease of use.
One other option that you can get on this is have the R500E, the electric crank option.
Now, I'm going to be perfectly honest with you on that.
I'm not a fan.
Now, this thing does take a little bit of effort to crank it up, a little bit of effort
to crank it down.
That battery operated crank sounds like a coffee grinder.
This thing's already pretty heavy, so when you add that battery on there, that'd be a
lot to pull up in a tree stand at four o'clock in the morning.
But if you'd like to see it, drop a comment below.
I'll be glad to show it to you.
As far as the upgrade goes, it's been back out on the market a few months now, and really
the only R500 problems I've seen come in.
I've seen one trigger issue, and the problem with any of these trigger issues is I have
to send that back to Raven.
Anything else I can fix, but they do all the trigger stuff.
Well, that's it for the Raven 500.
Hey, if you enjoyed the video today, go ahead and hit that subscribe button.
That'll really help out our channel.
Don't cost anything, and we'd really appreciate it.
Thanks for joining us today.
Now, it's time to get outside and get wild.
Y'all take care, and God bless.
