Glazing 3D Printing for a Slipcast Ornament.

History culture hero
16 followers
5 Video Views·Mar 14, 2026
This is the final installment in my video series going from a 3D printed mold to a slipcast
ornament and this video is going to be on glazing and firing the ornaments. As with pretty much
every other part of this process there are actually no right and wrong answers when it
comes to glazing it's just what works for you but I will show you what I did and it will hopefully
give you some ideas on how to adapt it for any changes that you use in your processes or firing
temperatures. I use cone 6 glazes, I make them myself from recipes that you can find on my
glazey profile and I glaze my pieces by dipping and pouring the glaze. I generally use two glazes
on most pieces to try and get a bit more variation into the glaze and generally aim for flowing
colourful glazes. This leads me down two different routes when glazing as the flowing glazes work
best over a patterned surface and some of the other glaze combinations like Tiger's Eye work
better on a flat surface but the main parts of the process are the same for both these different
styles so this is a basic overview of that process. The first thing I do with all of my pieces is wipe
them with a damp sponge. This is probably completely unnecessary for 99% of the pieces but
if there is dust on the surface it'll interfere with the glaze application so it's always worth
making sure there isn't prior to starting. Then I will dip the piece in a glaze. For the flowing
glazes I dip just the top third to a half of the piece in one glaze. To do this I can just hold the
piece in my hand. Where it gets a bit trickier is when I want to dip the whole piece in one colour.
On the Tiger's Eye pieces this is the first glaze that covers the whole surface and on the flowing
glazes it's the second glaze that covers the whole surface but either way I have to be able to hold
the ornament without touching the outside. I'm sure there are a variety of ways that this could
be done but the way that I went with was taking the bag tie from bags of clay and twisting it to
make a little gripper that can go through the neck of the piece and hold it from the inside.
The process is incredibly quick. This was only ever intended to be a makeshift way of holding
them while I figured out a better way but actually worked so well that I used it for all of the
ornaments that I've made and with this particular type of bag tie all you have to do is straighten
out the loop at the end, straighten out the whole thing and bend it in the middle and then twist
those two parts together so that you have essentially two legs of it that are locked
in the middle that you can then bend apart. The fold at the end of the bag tie that was already
there when you got it works as the ledge that sits inside the neck of the ornament and holds it
meaning it can only go in and out through the neck if you're squeezing it together. So once it's in
it locks itself in place and you can hold it from the handle. One thing to be aware of though is that
the ornaments want to float because they are hollow and full of air so you have to make sure
that you're pushing down on the neck rather than pushing down on your twisted bit of wire otherwise
they'll bob sideways. This makes it sound more complicated than it is you'll see exactly what I
mean when you try and dip one. One added benefit from making these from something you probably have
dozens of lying around in the studio is that you can make a handful of them and if your pieces need
to stay on there to dry a bit before they're firmed up you can just hang them from the loop at
the top. You can obviously avoid this entire process by brushing the glazes on or dipping the
top and bottom half separately and then you can just hold the ornament as you do it. You probably
don't want so much glaze on it that it flows off the piece entirely which can be an issue with the
type of glazes I'm using here. So what I do with mine is before I dip them in the glaze I dip the
neck end and maybe a centimeter or so up the ornament in water. This is known as a water
resist and the idea is that water gets into the bisqueware and reduces some of its ability to
take up glaze so where you've dipped the water when you dip it in the glaze you won't get as
much glaze on that part. There are obviously other ways that you could vary the glaze thickness to
have that buffer up around the neck such as dipping the whole piece very quickly and then
doing a second dip to build up the thickness a safe distance away from the neck but given how
frustrating it would be if you were trying to dip a piece quickly and went too far and submerged it
and got glaze inside the ornament I went with the water resist so I could get away with a slower dip
without building up excessive thickness around the neck. However you end up applying your glaze
the next step is figuring out how to fire them. If the top of your neck is perfectly flat which
hopefully it is you can fire them upside down on a kiln shelf with no added support but they will
be pretty unstable so any nudge to the kiln and they could all topple over like dominoes. I decided
the safest way to fire them would be upside down on a stand that went the whole way through and
supported the weight of the ornament on the top and to do that you need a vertical support that
can go through the neck of the ornament and is longer than the ornament is tall. There are a
couple of materials that would work for this you can get metal rods that are capable of withstanding
kiln temperatures and they are normally nichrome or kanthal or you can get alumina rods. In my
experience nichrome is the easiest to get hold of in the UK and also by far the worst option of the
three. When it's heated to cone six it will turn black and flake off. This mess will mostly affect
the inside of the ornament and cover your kiln shelf in metal flakes but it's not ideal. Kanthal
rods seem to withstand kiln temperatures much better but they will still soften as they get to
peak temperature and in theory could bend with your ornament on them if it was a particularly
heavy ornament or a thin rod. My preferred option is alumina rods. These are suitable for temperatures
well beyond what our kilns will get up to so they are completely unaffected by the temperature.
They are brittle and can break if you drop them but should be the safest option for a firing.
To complete the stands you need something to insert these alumina rods into. Some ceramic
suppliers will sell pre-made bases for things like this but if you can't find any the easiest
thing to do is get a soft kiln brick and cut it up. These are a bit like ceramic polystyrene and
can be cut quite easily with something like a hacksaw but if you're going to do this it is very
important that you wear a mask to filter it all out as this dust will be terrible for your lungs.
It seems like the alumina rods are easier to get hold of in some countries but in the UK I couldn't
find any for sale in the dimensions that I wanted and I ended up ordering a bulk quantity directly
from a factory in China and I have now listed them for sale in my website so at least there
is one place that you can get them in the UK. For my ornaments I went with 6mm diameter,
100mm length and beveled ends. I also tested 4mm diameter alumina rods which worked well
but obviously that's a much smaller surface area for the entire ornament to be suspended from.
But if you can find something for sale with approximately those dimensions it'll almost
certainly work for the ornaments that I put the moulds up for. When placing the ornament on the
stand for firing you want to make sure that it is centred and you can test this by spinning the
ornament and seeing how it spins. If it's very lopsided just keep nudging it until it's balanced
right on the middle as a lopsided firing can warp the piece so it's not perfectly spherical anymore
but also it encourages the glaze to flow around one side and drip off there which can stick it
to the rod. Once you've fired them the only thing left to do is get yourself some caps to go on the
end. You will find a bunch of them available and most of them are rubbish and I'm afraid I don't
have great tips on how to find the good ones. I found one listing on eBay which had full metal
caps rather than these ones which are made of what feels like foil and are incredibly easy to squash.
That said once the foil ones are on the piece they should be okay and they look all right as well
so maybe there's not too much harm in having the foil ones but full metal ones do exist it's just
really hard to tell the quality until you're physically holding them so you might have to
buy a few to find out. The neck of the ornament molds that I've released should give you a fired
size of just under 12 mil so you're looking for a 12 mil cap with the caveat that if a load of glaze
runs down you might end up increasing that thickness by a couple of mil which is why it's
worth being careful around the neck area. And finally you can tie a bit of ribbon to it or you
can get these clip-on gold and silver strings that seem to work quite well. And that's it you've
completed your ornament start to finish. I hope you've enjoyed this series of videos it's been a
really fun project to work through and knowing that I was going to be making these videos and
sharing the files has led me to make a number of improvements and new designs to the project
which is why there's those new mold designs out so it's been really great from my perspective as
well. I might do a follow-up video if any of you have questions that I haven't answered in this
series if you post questions to the comments if there's enough of them to fill a video I will do
a follow-up Q&A. Otherwise I hope this has been useful I will release individual videos on other
mold designs and how to use them and things like that but this is it for this series and I will
see you when I decide to do something else.
