3D Printing VS Injection Molding: Manufacturing Solid Objects

Technology Information
13 followers
9 Video Views·Jan 14, 2026
So is 3D printing better than injection molding? We're going to talk about it a little bit today.
So 3D printing and injection molding, it really depends on the process that you're working with
because the context of your project matters. But here today we're going to talk about enclosed
bodies. 3D printing is exceptionally good at making an enclosed body, a solid cube. Whereas
injection molding physically cannot do something like this. A solid cube like this that's about
two inches to a side cannot be made with injection molding because the material would shrink. You'd
have to fill up a solid cube with plastic and once it starts to cool it would shrink and you'd have
deformation here. And in fact this sample brick right here, this injection molding brick, has
a demonstration of that occurring right there to where you can see where the shrinkage is happening
because this is a solid body. If you go any larger than that the shrinkage is going to be worse.
So yes, 3D printing can make fully enclosed bodies that appear to be solid all the way through
even though they're technically not. This one is filled in with infill. But if you want to do
something even remotely close to this with injection molding, you have to take this cube
and redesign it to be a giant flat and lay it out flat and then you shoot that. And that's not very
handy or not very useful when you can have a solid brick right here. Now if you wanted to get
a similar kind of form factor as this without going flat, something you can do with injection molding
is put a cavity on the back side of it. But that doesn't really gain you anything because again
fully solid cube, six sides, all of them covered. In that way 3D printing is better because you get
to make a fully enclosed body that won't be a dirt catcher and again doesn't increase the
complexity of the part that you're designing because now you have to have a mold that
shoots this and whatever other kind of deformations you may have. But also with this solid body one
thing to be focused on is the texture on the outside. We're going to talk about that in the next video.
