3D Printing VS Injection Molding: Manufacturing Textures

Technology Information
13 followers
15 Video Views·Jan 15, 2026
So is 3D printing better than injection molding?
Well, we're going to talk about it a little bit today.
So when making an injection molded part, you are limited by the capabilities of molds,
because molds are machined pieces of metal.
So you can only create the finest detail that your machining equipment can create,
which is pretty darn fine.
But there are limitations and it is exceptionally expensive.
To imprint a diamond pattern on a flat injection molded piece,
like this foldable cube, can be very expensive,
because imprinting a small diamond pattern just takes a lot of machine time.
It is also very complex for the mold.
If you're just doing it, again, on a flat piece and imprinting the texture right here,
it's not that big of a deal.
The mold comes together, stamps the piece basically.
But if you actually make a cube, something like this,
then it becomes a lot more difficult,
because now the mold basically has to have four to six sides,
or however many sides are textured on the cube,
which is now exceptionally complex and exceptionally difficult.
But right here with this 3D printed part,
you have exceptionally fine details for free.
There was no mold.
There was no machining cost.
This part was grown just by the nature of the process,
and there was no complexity in it.
In fact, this is one of the simplest 3D printing parts you can possibly create,
and it would be impossible to injection mold.
So textures on the surfaces of complex shapes are actually much easier with 3D printing,
and you have a lot more freedom,
because those textures can have a lot more variability.
Because again, you're not designing a mold around your part.
You're just designing the part.
So you have unlimited capabilities of the types of textures you can create there.
Whatever you can do in CAD can be 3D printed,
which is just not the case with injection molding.
You do not have the capability to imprint anything you want on there,
and if you really have to pursue it,
then you have to do these kind of design workarounds
of either making your three-dimensional part flat,
and then folding it back together in assembly,
which increases cost during assembly and post-production.
But you also may just physically not be able to do it,
because if you need a solid cube with textures on all six sides,
you cannot do this readily with injection molding.
And even if you do, even if you do this,
and you imprint a diamond pattern on your mold,
and you shoot that, the mold is exceptionally expensive.
So mass production 3D printing is very often a far more affordable option,
because just for the cost of mold molding alone,
you can get several thousand,
maybe tens of thousands of pieces completed just by the nature of the process,
because surface finish is not complexity for 3D printing or additive manufacturing.
It's just par for the course.
