Tiny Tomatos Of Polymer Clay

Hello everyone and welcome to my channel. Today I am going to make some tomatoes or tomatoes depending from where you are coming from. Anyway, I have this little mold of a little green leaf that I am going to use. It is easy to make a leaf mold yourself. Just roll out a piece of clay, cut out the little leaf, make the indents or the decorations in the leaf, harden that in the oven and then make a mold of it and then you can make as many of that leaves as you want to. I'm not showing you here how to do that but I'm filling up the little mold with some green clay, pushing it really good in there and then I'm just taking it out again and then I have a leaf ready for being used. Then at the rounded end of these leaves I am going to squeeze it a bit together just to give it a little more life just like this. Very easy and I'm doing this again on all my leaves. Then I 3D printed this helper that is two millimeter and one millimeter in the height so you can just roll a little cane into that size you need. So this one is the one millimeter and you just keep rolling and then do it slowly but firmly and you will get a snake that has that one millimeter what that circumference no that's um um you know what I'm thinking of. I am going to leave a link for the one I made here in the info box below and you will also find one that is going to make smaller than the one millimeter because that is actually kind of big so I hand rolled some that was even tinier. I want to make one of those ranks or what you call that where the tomatoes is hanging on so I took a piece of this one millimeter snake and I folded it a little just to make it a little more lifelike. Then I rolled my snake here even thinner and I cut out a few pieces for some of those um twigs I think you call it maybe and I'm placing those onto the vine itself and I want a leave or two right there where these two vines connects so that I also make it a little bit stronger the bond between these two pieces and I'm gonna do that one more time just a little lower on this one and also here I am going to place a leave or two at the connections right there perfect placing a little more of my leaves to make this look a little more interesting and real um yeah now for the tomatoes or tomatoes I am just taking some X-mas red clay here and I am rolling that into some small tiny balls they are around six seven millimeters in diameters that is the word I missed earlier diameters in one end of this little round ball I am making these lines from the side and up and making kind of an indent in the middle this is the top of my tomato and in the other end I'm just making a little um little hole with tiny tiny small indents on the sides not as big as I did here in the top but I'm uh keeping on working with these lines until I'm really happy with them I want it to look like a tomato when it's done a few of them I go a little longer down the side with but not too many of them and this is the bottom part of the tomatoes I am doing this on all my small tomatoes then I'm using a tiny piece of one of those rolled out canes this is the stem of the tomato this one is not going on to this thing we made right here with the leaves on but then I rolled out a tiny tiny piece of clay so that I have this little little thing teeny tiny one and I'm placing that on top of the tomato as the little um I don't know what that's called but the small leaves that are on the top of the tomato and I'm making around five or six of those and again I'm gonna make these small leaves on all of my tomatoes I made another one without the stem and I'm placing that right here so that one is going to be my stem then I am going to make another one again and place on the other one so I first made all the indents on this little tomato now I'm placing the small leaf for the top and I'm placing that underneath here I'm actually going to make one more tomato with a little longer stem that I'm connecting to one of the stems I have right here because I thought this was a little too little tomatoes on this little stem here after baking I did let everything cool down and now I am going to give them a little more color with some yellow paint and I'm just dabbing a tiny tiny amount of paint onto my tomatoes and then I'm kind of wiping it off again with the tip of my finger leaving a little lighter mark on the tomatoes here you can see I actually placed a third tomato on the little vine and I'm doing this on all the tomatoes I made and this is actually kind of fun to sit and do I use a tiny bit of a lighter green color to paint the leaves and a little on the top of the tomatoes and when that has all dried I am using my Fimo glaze to glaze all my tomatoes and only the tomatoes and that is all there is for this little build it is quite fun and it doesn't take a long time to make these small tomatoes and even if you're not that skilled I'm pretty sure you can make this one I hope you will enjoy that one so thank you for watching and happy crafting