THE BEST OPTION

Exploring Ancient Crossbows
3 followers
2 Video Views·Mar 10, 2026
THE BEST OPTION
Comments are disabled for this video.
What's going on everyone?
Welcome to today's video.
Today is a Lancaster unboxing.
Lancaster Archery Supply, where they send me something,
I open it up, and a lot of times,
I don't even know what it is.
This one, I know it is a sight,
but I'm not 100% sure what it is
and all the features of it.
So, we're gonna dive on in, open this up,
get it set up on a bow, and shoot a little bit,
and just kinda give my honest feedback on it.
So, if you guys don't know Lancaster Archery Supply,
you can get literally anything you want
in the entire world, in the archery world,
next day, if you're that impatient.
But, it's a great resource.
Make sure you check them out.
LancasterArcherySupply.com.
Opening this bad boy up.
Okay, there we go.
Spot Hog Fast Eddie with the triple stack.
Seems like the triple stack has been super, super popular
and in high demand, and it seems like Spot Hog
might be having some issues on getting it out there.
So, these are like gold right now.
It's kinda hard to find, but Lancaster does have some.
They just got some, and that's why I have one
to do a video on.
But, I'm actually kind of excited to see
what this sight is all about,
because of all the hype around it.
So, it is not a dovetail mount.
I wasn't sure if it was going to be a dovetail mount or not.
This one just bolts onto the side of the bow,
which is totally fine.
It's gonna work exactly the same.
I'm guessing those are the front scope rings.
So, I guess we'll talk about that first.
What comes stock on it is this one.
And then, this one might be,
it looks like a reducer of some sort.
And then, this one is just a single guy.
So, if you like that sort of style
of lining up your peep sight with that, it is nice.
And we can talk about that a little bit later.
Got some hardware in here, it looks like.
Just a little bracket, an Allen wrench, which is nice.
Looks like a cut-off Allen wrench.
So, there's probably a very tight place
where you gotta get that.
And then, inside of the packaging,
we have sight tapes, and lots of sight tapes.
And it has some instructions.
Sight in at 20 yards, and install your calibration scale.
Sight in at 60 yards, and select what tape works.
So, that's kind of cool.
They got that for you right there.
Lots of sight tapes.
36 different sight tapes.
Tape on the inside as well.
There are some basic instructions.
So, this sight, on Lancaster's website, is $369.99.
So, this is a premier hunting sight.
It's definitely high quality, highly made,
and the price definitely shows for it.
But, I think it's gonna be a really versatile sight,
and I think if you're into hunting,
into target, and all the above,
I think it'll be a really good option.
Right off the bat, just playing around
with it a little bit.
It is pretty adjustable.
So, we have right here, I'll just talk about
this left and right windage bracket.
It has five examples here of different configurations
that you can actually shift this left and right quite a bit.
And I think why they have to do that
is because the actual left and right micro-adjustment space
isn't as big as some of the other space.
So, instead of a big micro-adjustment space,
they have five different macro-adjustments,
if that totally makes sense.
So, in order to change left and right,
you have to flick this switch right here,
just like that, and then you spin this little dial
that shifts the sight left or right.
So, right now, I'm shifting it to the left,
and there is no marks or anything,
so you kind of just have to watch the sight move
and to kind of get a feel for it,
which I'm sure you would just get used to over time.
It is nice that there is a lock on it,
and once it is locked down, there's nothing.
But I could definitely see, if you ever forget to do that,
it's gonna be loud and rattly,
so you always have to make sure that's locked down.
So, left and right adjustment, pretty solid.
It is micro-adjustable, and there's a lock on it.
As far as up and down adjustment,
all Spot Hogs come with this dial wheel on the side,
which is kind of a custom in a lot of different sights,
and they do have this lock on the bottom.
So, it is in the locked position right now.
You have to unlock it in order to move it,
and then you just move the dial.
And I really do like Spot Hogs' dial.
It's a little bigger, it's really gritty,
so you have a good grip to it.
A lot of times, if you're wearing gloves or it's super cold
and it's just small and slippery, like a smooth metal,
it can be kind of hard, so I do like that.
You also have your three indicators on there
for your three pins that are all micro-adjust
by one Allen wrench,
so you can move those to however you want them,
20, 30, 40, 20, 25, 30, however you want that.
Moving in on the internals,
just kind of noticing, because I do have it exposed,
the internal gear is plastic, which I think is totally fine,
but I could maybe see some wear and tear over time,
and it is exposed,
so maybe some dirt could get in there or something.
I don't know.
So, that's maybe something just to keep an eye on,
is that it is exposed,
so maybe just don't dunk your sight
in a sandy beach or something, and you'll probably be fine.
Diving in further, like I said,
this is not the dovetail mount,
so you have two different adjustment slots
or two different positions
that you have to mount this on the bow,
so if you have the new V3X or anything,
you couldn't actually insert it into the riser.
You would have to bolt it on the side.
The front housing, like I mentioned,
we got out of the box, we have three options here.
Looks like we have a reducer of some sorts,
and the double line things,
and all you do is, I think,
yep, you just twist this off.
There we go.
So, you can see, yeah, that one's way bigger than these,
so let's just say we wanted to swap this out.
I won't screw it.
Hello.
That was my fault.
I didn't wanna make sure I don't strip these.
Okay, there we go.
So, you can see that's just a little bit smaller.
It's not as big,
so if you wanted to run a smaller peep sight,
you can do that,
and I think this is the 41 millimeter.
I didn't see anything where it says,
but if I had to guess, this is a 41 millimeter
of their bigger size scope housing,
and the scope housing is not replaceable on this.
Couldn't put a UV3 or anything on it.
This is the scope housing that you get.
Going up on top, they do have a lot of exposed fiber,
so I'm assuming that there is a lot
of just natural sunlight coming in.
Also looks like they have a thread hole right there
where you can put maybe aftermarket,
or they have a little light where you can screw
into the side, and it'll actually brighten up the fibers.
They do have a bubble on the front down here,
a nice small green one.
So, there is a set screw for every pin,
so there's three set screws on the side,
and it is the same Allen wrench
as the adjustment Allen screw, which is nice.
So, you can see that you just stick it in.
I gotta find it.
So, you find the pin.
You just have to loosen it.
I'm assuming just maybe a turn or so,
and you come up top here,
and there's three screws also,
one for every individual pin.
Same Allen wrench size.
Put it in there, and I don't know if you can tell.
You gotta focus.
When you spin this, you can see it just moves.
It's moving down right now.
So, essentially, what I would probably recommend,
because this is pretty standard per site,
is you get your dial where you want it.
So, on the higher side of the,
no wait, the lower side of the dial, I guess,
so that you have maximum range.
So, you put the dial kind of where you want it,
and then you bring your 20 pin up or down to your 20 mark,
and then you set up your dial
so you can use the full 100 yards on it,
rather than setting up the dial in the middle,
and then you're bottoming out at 80 yards or whatever.
So, that allows you to do that, get your 20,
and then you can bring up for your 25 or your 30.
So, I think with a three pin setup for hunting situations,
I'd probably do a 20, 30, 40,
so that if I ever, say if I'm just deer hunting
in the rut or whatever, and a buck's just running by,
and I know that the trail liaison is 30,
and I can just pick up my bow,
and I don't have to range him or anything,
and I can just shoot him,
compared to actually moving your site
or something like that.
So, 20, 30, 40, 20, 25, 30,
something like that would probably be totally cool.
So, for your second axis adjustment,
which is essentially on flat ground,
you're using the bubble in there,
so you can use a jig or even something straight.
If you know something straight, like this table,
you could just put it up against it
and get your second axis level.
But what you have to do is you have to loosen
this bolt right here, this bolt right here,
and then unique to the Spothawk,
I've never really seen this before,
but there's two little set screws on the side.
So, I loosened both of them right now
so that this site can teeter back and forth like that.
It's essentially a long groove
that that bolt just floats back and forth in.
And what you do, I guess,
is you spin these set screws down.
So, you spin one a little bit,
and you come to the other side,
and you spin the other one a little bit
until you have it tightened down,
and it's probably gonna be a little bit
just like back and forth,
spinning one side, spinning the other side,
with this preferably on the bow level
or in a jig of some sort
until you get this bubble level on zero ground.
Then, for your third axis,
they have it kind of on like a teetering
little half circle right here,
and you have to loosen each of these bolts.
And I already loosened them,
but you can see it kind of shifts back and forth like that.
So, you're gonna have to go back and forth
and tighten one a little bit
and tighten the other one a little bit
to get that set up,
which is a micro adjust in its purest form,
but there's no clicks,
there's no anything.
You loosen it up, and it just kind of loosens.
So, that sometimes can be a frustrating battle,
but they're all kind of like that.
But SpotHog definitely has their own unique way
of using this half moon system for their third axis,
and then their little set screws on each side
for their second axis.
So, it does have second and third axis,
which is really good and important.
But yeah, that's about,
I think that's about all of the features of this bad boy.
But we're gonna slap this on a bow
and just kind of see how it is,
and then we're gonna get the second and third axis lined up
and then just shoot a bit, see how it feels.
So, the two little screws that they provide you
are how you're gonna mount it onto the bow.
So, make sure you don't lose those.
And then we have a, we got a V3X here.
So, like I was saying, you can't use a bridge lock
because obviously that doesn't make any sense.
What we're gonna do though
is just mount it right to the side of the bow.
I said that completely wrong.
So, there's only one mounting area
because I just realized that these two are threaded.
So, this must be the quiver bracket holes,
these four screw options,
and you have to mount it right in the center right here.
Okay.
So, there we go.
That's it on the bow.
Looks pretty good.
Looks like there's a lot going on
because there is a lot going on,
a lot of moving parts in this steel.
So, what we're gonna do
to get the third axis and stuff set up,
since there isn't a dovetail
and I have a jig set up to do it in dovetails,
I'm actually gonna use the bow press.
So, that's probably the only level we need exactly.
And you can see it is just slightly,
it's like touching this far line,
but I'm actually not too worried about that
because as long as this matches this,
doesn't matter if this is 100%.
In order to do this second axis,
I think what I'm gonna do
is back out these set screws all the way
so that I have full range of motion.
And I think this is actually probably
the best way to do this
so that you're not have a headache of going back and forth.
But you can see you have all of that adjustability there.
I think I'm gonna snug this just a smidgen.
I'll put this in the correct spot,
which is just barely touching this line
because this bubble is just barely touching this line.
Double check, because always when you tighten down it,
there's a good chance that it moved, but it didn't.
So, now what I'm gonna do
is I'm gonna tighten these set screws down.
I guess just probably snug.
Take this guy off,
and then I'm gonna really tighten this front one down.
Really tighten the set screws down.
So, that's probably the main reason it's not,
these set screws aren't for micro-adjust.
They're just to make sure
that it doesn't shift left or right
because it's not a,
it's a oblong hole,
so there probably is just potential
for it to get bumped or something in the field.
Okay, so we have our second axis all good and dandy.
So, what I'm gonna do is I'm gonna put
this hand ski level back on the site.
And the site right now, this part of the site doesn't move.
So, this is like 100% square with the bow
and with the earth.
So, it's neutral essentially.
So, we're gonna tip this down,
and this is why this type of bow press is really nice.
Bow press that can just move on you.
You can see that this one is in the middle,
and then that one's slightly off.
So, even though we set the second axis, the third axis,
which is whenever you tip the bow uphill or downhill,
this bubble in the third axis is now affected.
So, we're gonna use this little Allen,
or this bigger Allen wrench that they supplied.
One of them, not sure what one.
Yeah, I loosened the correct one,
and now I'm gonna tighten down the opposite one.
It's like a teeter-totter.
Okay, so check those bubbles out.
That's pretty dang good.
And I think we're gonna leave it there.
And that actually wasn't too bad,
doing that on that teeter-totter system.
Essentially, you loosen one,
and you tighten the other one to shift it all down.
So, you can just quarter turn, quarter turn,
quarter turn, quarter turn, until you get it right.
So, we're gonna switch this back.
Double check, yep, they're both the same.
And you can even do, let's do, we're doing an uphill shot.
What do we got?
We got pretty much the same.
The bubble's off to the right there,
as long as they're the same.
Because the press, the press isn't square right now,
so it's like moving the bow.
But we know what the bow level is,
and as long as it's good with the sight level, we're good.
So, there you go, that was actually really easy.
Super, pretty user-friendly,
as long as you have this cut-off Allen wrench.
If you don't have this cut-off Allen wrench,
it is almost impossible to do this third axis.
So, make sure you don't lose this.
Okay, so what we're gonna do now
is just get our left and rights decent,
and then what I'm gonna do
is I'm gonna back up to about eight yards.
And if I'm about right on at eight yards,
I'm about on at 20.
So, I'll at least be able to get rough
and not miss the complete target out there.
Okay, so way, I was aiming at the top left one,
so I'm way left and low.
So, I at least can get like a,
from here, a pretty decent,
can get sighted in pretty decently,
especially left and right.
So, we're already pretty far left,
so I'm actually gonna have to move this bracket.
So, I'm gonna move the micro adjust back into the middle,
because I already have it cranked pretty far left.
Now, I'm gonna move this bracket just over.
I'm gonna have to take it apart and see what it looks like.
So, we were right there,
and all we're gonna do is move it over here.
So, we're gonna get, I don't know,
maybe a quarter inch of adjustment.
So, hopefully we're not maxed out now too far to the left.
All right, we're all adjusted.
Let's see where we land.
Okay, better.
Pretty close.
We should be good, though.
I think I'm gonna fling one outside.
This is probably gonna make a lot of people cringe.
Custom.
So, we're gonna fling them out the window
into the frozen tundra.
Oh, nice.
So, we hit right in the middle where we want to,
and we got set in at eight yards.
Eight or nine yards is exactly your 20-yard pin, roughly.
Dropping everything today.
Let me see what my 30 is like.
Right in the middle, nice.
So, my second pin is 30.
Let's see what 40's like.
40's probably decent.
Oh, yeah, I see it now.
So, not bad.
Pretty much, they're set up 20, 30, 40, ready to go,
and my 40, all I would have to do to adjust it
is go in this little side screw from at the bottom.
Twist it a little bit.
Make sure you tighten it back down.
To have a three-pin setup like this is nice.
It's very similar to the Trophy Ridge.
Trophy Ridge did this a while ago,
but they had seven, and it wasn't a slider.
So, for those of you that still wanna shoot farther
and have multiple pins, this is a really good option.
That looks decent.
Not bad.
The ability to just jump around like that,
I mean, it's pretty much a three-pin sight,
but it's a slider.
So, what it boils down to, pretty much,
on what sight to select is personal preference
in what you're shooting.
So, to close this video out,
I just wanted to talk one final time
just about this is the Triple Stack,
three-pin adjustable sight, but it also is a slider.
So, you can shoot any sort of distance you want,
but in your sight picture,
you do have three pins to pay attention to,
which I have found, in the moment,
sometimes can be confusing if you have a ton of pins
and you gotta calculate and going between the gaps.
So, for me, myself, I choose a double-pin like this.
So, a little bit simpler and a little bit farther apart,
so I'm always focused on my top pin,
but I have an emergency second pin
in case the animal or the target is a little farther
and I don't really have time to move my sight.
And this is on an Accel Landslide.
Now, another example, oh wow, nice, no pin.
This one is the Accel AccuTouch
and it has just a single pin.
So, this is like a strictly,
you have one aiming reticle, one distance,
which in itself has pros and cons.
This is the SpotHog Fast Eddy,
but it has the single pin in it, right?
Yeah, single pin.
So, you have all of the features of the Triple Stack,
but in a dovetail model and with a movable single pin on it.
And then we have just an HHA model
that has their own setup and everything.
So, there's pros and cons to everything
and I think that is really important
and I'm gonna leave you guys with this.
Like, so many people have so many opinions and biases
on brands and what they want,
but really it's what fits your needs best
and what even fits your price point best.
So, there's a lot of options out there
and that is one thing
why I really enjoy these Lancaster unboxings
is because I'm super unbiased about it
and I want just to educate and show you guys
all the options available out there.
So, this one, Fast Eddy, Triple Stack,
very popular, very much wanted to the public
because you can't find them anywhere.
So, luckily I got my hands on one.
Got you guys unboxing tutorial.
Make sure to check it out, LancasterArchery.com
for all of your archery needs
and we'll catch you guys in the next one.
Thanks for watching.
