Dynamic Principles: Super Low Profile Plate Carrier and Accessories

Ballistic Lab
1 follower
1 Video View·Jan 8, 2026
Dynamic Principles: Super Low Profile Plate Carrier and Accessories
Alright guys, today we're going to look at the Super Low Profile Plate Carrier from
Dynamic Principles, as well as some of the very recent tweaks they've made to the design
to incorporate some of their other product lines. So we've got their 2-in-2 insert in here,
their basic cummerbund set up on here, and then I should caveat, this one they made me
cut sized for eSappies and backers. That's not normally what they fit, they're really meant for
standalone plates, but they knew that that's kind of what I've got to keep sizing consistent across
the board, and they wanted me to have something I could use. So they did send this to me. I wasn't,
I was actually asking them some questions because I was going to buy one on the website that night,
and then they told me they're tweaking it a little bit, and next thing I know it's here.
So let's get this thing on a table and take a look at it. It is far more comfortable than it
has any business being, and I really can't figure out why. It's working with a super basic elastic
cummerbund, unpadded straps, it's pulling from the front of the plate bag, all the things that
most people equate to not being comfortable, and it's easy to wear. I don't know why. So
that kind of goes into another point. When comfort is the only selling point to a plate carrier,
I question a lot of what's going on there, right? Comfort is incredibly subjective,
and a lot of the things that go into making a plate carrier more comfortable
have costs elsewhere, usually in bulk and weight, but I don't think comfort alone should be a
selling point that anybody's looking at. It's a consideration for sure, you don't want an
uncomfortable plate carrier. If that's the only good thing you can say about it, you might need
to look elsewhere. So get it on the table and look at it and show you guys what's up.
All right, so we're looking at the Super Low Profile Plate Carrier from Dynamic Principles,
and I don't really know where they came from, right? They just kind of popped up out of nowhere,
and they're doing some really cool stuff. So they've got their kind of flagship
full profile plate carrier that they have out there, which does a lot of neat stuff. They've
got kind of their own version of the AVS1000 capability, where they've got a pack that's
also the rear plate bag, but then this is the other end of their spectrum with their Super Low
Profile Plate Carrier. So a couple of different products that are on here is there's this
placard system here, which has great velcro continuity. So this is an elastic MOLLE wrap,
very similar in capability to the J-Tactical MOLLE wrap that I showed you guys. If you like
traditional MOLLE, go that route. If you like laser cut, check out this route, right? It does
have the added benefit of having a velcro face on here, so we could really work without the side
release buckles and the side release buckles on the vest. Throw this on here as an insert and
then wrap the cummerbund around it, and that would work out just fine. If you do need the MOLLE,
obviously you're going to use it as a more traditional flap, in which case you may want
the side release buckles there. I have pitched a couple of ideas to the guys at Dynamic Principles
on some tweaks to this, and I'll kind of hold off on commenting too much on that until I see
whether or not they do it, but basically it would allow you to use the MOLLE wrap as just a straight
MOLLE face on here without needing an insert or anything like that.
So the insert in here is one of the several inserts they offer. This is their 2-in-2,
so you've got your two M4-sized cells and then your two pistol-sized cells.
I'm not typically a huge fan of pistol mags on my plate carrier. They just load better for me
off the belt, and my pistol is attached to my belt, so that's where I would have those.
But it does give you the capability for like a baton or a flashlight or multi-tool or something
up there if that works out well for what you're doing versus needing three rifle magazines.
So the elastic wrap here comes off the front. I'm sorry, it's not elastic wrap. It is
a MOLLE wrap. So you've got six columns of laser-cut MOLLE with the Velcro and then a column
on each side, which ends up wrapping around the side of your placard, and then it secures in the
back with Velcro there. And then the insert is removable from there as well, so you can swap that
out. And the one wrap on the side of these buckles here, so you can adjust ride height
and take that off if you don't need it. So we'll get that out of the way. It does have the loops
for retention on the top there if you want them. This one is pretty snug. I think their production
ones are about the same. This one was a prototype insert. Looking at the front plate bag here,
so you don't have any MOLLE in this loop field, which I had kind of missed at first glance. I
think I was looking at Multicam Black and for some reason I thought there was MOLLE here.
But there's really nothing lost there. As long as you have placard capability,
you don't need MOLLE down here. But what I like is, you know, compared to some other slick
rigs that are out there, you still have laser-cut MOLLE on the chest portion. So if you need your
end-user device or an admin pouch or push-to-talk mounting or something like that,
you've got it built into the vest. Contrary to popular belief, laser-cut MOLLE is plenty strong
and it doesn't take up any space. So there's really no reason not to have that, even if you're
wearing this thing concealed, which is a whole separate conversation.
On the sides of the plate bags, now like I said in the intro, mine are cut
thicker than they would be otherwise, but they're still going to have these slots cut in them. So
if you need to tether stuff to the side of your plate bag, whether it be cable routing or antennas
or you've got some single column thing that you want to have mounted there so it rides just under
your cummerbund, they're still going to have that on there. Granted, it won't be quite as thick.
It'll be a little bit more narrow. So you might be able to get some like Hypalon MOLLE webbing
through the production ones, but you're not going to get like a malice clip through there,
nor would you really want to. The shoulder straps are standard, you know, two-layer
webbing and velcro in this place. In this case, it's laminate and velcro
with hook coming from the back on top and the loop coming from the front on the bottom.
Sorry, I didn't realize I wasn't quite in frame there. Coincidentally, these lined up exactly the
way they want to. Fits me perfect and gets the plate height exactly where I would want it,
which is pretty rare for me to not have to have any unmatched velcro. They did throw in
some loop in case I ran into problems with that and then you could cancel out the hook as needed,
which was a nice consideration, right? Additionally, these shoulder straps are kind of
infinitely adjustable. So you've got loop and hook the full length of each one and nothing is
fixed anywhere. So you can keep overlapping these as far as you need to. On the back,
you can end up tucking it into the rear plate bag. On the front, you're just going to have
to police up that strap, which with it being laminate, you can throw a stitch in there and
cut it and it'll be just fine. You shouldn't have to worry about fraying, which is pretty nice,
right? Looking at the plate bags, they are very simple, right? Very well done plate bags as far
as sizing goes. But it's just an open plate bag in there with some loop on the body side
and some hook attaching to that. So that's for any dangler considerations there.
You've got some laser cut holes in the bottom here. They are a little small if you're planning
to run some shock cord through there, but you could probably get it through with a little
bit of effort if you wanted to hang something off the bottom of your plate bag. And then looking at
the back. All right, so the cummerbund that's on here right now is a traditional Velcro
cummerbund like you would find on your ferro type vests, right? So I'm not sure
if you could use something else very easily. You could throw the axle adapter on there if you
wanted to have a two-band MOLLE cummerbund or something like that or the VXV Concepts adapter
or the Shaw adapter. There's plenty of adapters out there to tweak your cummerbund choices.
What's nice though is this is a full MOLLE field. So MOLLE up top and then MOLLE cut into
the Velcro on the bottom there. So if you needed to use that MOLLE, you could. You just need to
figure out how you're going to attach your cummerbund and deal with that. If you're using a
true skeletonized cummerbund, you might be able to just tie that off on two of these rows and
weave pouches over that. I'm not quite sure how well that would work, but the option is there.
What I'm going to end up doing though for the cummerbund on this one, I think,
is throwing a Brave Castle chest rig on here. So we've got two awesome products combined
to make one incredible product, which would be a good time, right?
That said, these things, I had the price and now it's escaping me, are very affordable on
the Dynamic Principles website. They don't come with the cummerbund, but that's okay
because then you get your choice in cummerbund and you're not really, there's nothing super
proprietary about any of this. So any, you know, Velcro on Velcro cummerbund is going to work out
just fine. So if you've got leftover Faros or some old ANA tactical cummerbunds, all those
options will work. The molly wrap and the inserts are on the website as well. So you've got plenty
of options there, you know, if you want to mix and match colors and what have you. But like I said,
this thing has no business being as comfortable as it is. I don't know why it was so comfortable.
The armor bulk was still there and the weight. Everything I've done, you know, has been
eSappies and backers. So that's the weight that I'm used to. And for whatever reason,
this carries it really well. I don't know if it's just, I haven't used a true elastic cummerbund in
a while, or if there's some goofy magic with the angle of the shoulder straps. I don't really know,
which is why you should never trust comfortable plate carriers, right?
Got to have more selling points. This one is as low profile as any other plate carrier out there,
but it has the capability to have molly everywhere. If that's something that you need,
if nothing else, you've got some laser cut, you know, cord management, antenna management,
routing options there. So hop on over to Dynamic Principles and check out their super low profile
plate carrier, and then some of their other systems as well that may or may not play with
this one. So their chest rigs are pretty ingenious, as well as their higher tiered,
more built out plate carrier. Thanks, Seth.
