Worth it Ultraview x Mathews Bridge-Lock UV Slider

Defending with Past Crossbows
3 followers
3 Video Views·Mar 7, 2026
Worth it Ultraview x Mathews Bridge-Lock UV Slider
Comments are disabled for this video.
Guys, welcome back to the channel today. As promised,
I'm going to break down this Matthew's edition UV slider.
I want to compare and contrast it to the old UV slider.
I want to see what did they make better? What did they change?
What's different? Uh, let's get right to it. This is not a cheap site.
So if you're on a budget, this is not for you,
but if you are looking for something pretty advanced that does a lot of things,
this could be the, this could be the site for you. Let's dig in.
So UltraView does a good job with their packaging.
You have a quick start guide. You have a QR code.
You have your options of a three pin horizontal, vertical,
or a five pin horizontal.
I ordered a five pin horizontal because I'm hunting out West.
I don't want to slide for any animal from pretty much 20 out to 60.
I'd like to have fixed pens and anything beyond 60 I will slide.
I'll use my bottom pin.
That'll give me the most distance or clearance before I hit that site housing.
Nice case that comes with it. Here's the head.
This is that viz where you can take out the light.
If you're going to hunt a state that doesn't allow light and you can take your
light out. So no electronics and put this in a spare hardware,
your site tapes, Ooh, and possibly a way to recharge your battery.
I don't know. We'll check it out. Let's first look at the comparison.
Come on over guys. I'm not like, this is just a waste of space for me,
but if somebody wants to push their site out,
you might want to go with the original ultra view slider.
But for me I got one spot and it's nice.
So let's get this in. We're going to put this in the RS.
It's got like a really good fit. Like you, you have like a stop.
So there's no like guessing you're this cutout right here.
You just go all the way in and that's where it needs to be.
So typically these will come out of factory with the first and second access
married. Meaning you shouldn't have to adjust the rail.
You shouldn't have to be able to manipulate that first access.
They're tied together.
What they're saying is that it's going to come out of factory perfectly square.
We shall see. So just like the old ultra view,
you're going to open up and you're going to come in from the backside should
click. There's your click. Well,
first thing I noticed is that there is now a stop, which is great.
The original UV slider did not have a stop.
Once you get your home or your 20 set, you want to build a,
like if you're looking at an animal and you're just going to slide up to home,
you should be able to look at the animal, slide at the home,
lock it in and know you're there. So that stop is here.
So this guy will meet this guy. That's your stop.
We may need to adjust our stop depending on the setup. So that's pretty cool.
First thing I like to do is just put levels on my string bubble.
Both bubbles are level and this bubble is level.
Now that's pretty fortunate for me.
Usually we will use a Hamsky gen two to inspect and there's a sweet place right
here on the site to put this. So it's flush.
So our string is level in both planes.
Our Hamsky gen two is level and our bubble is level on the site.
So we literally don't have to make any adjustments,
but we'll show you where to make adjustments if you had to.
So this is the original, this is the Matthews edition.
Bubbles are the same. I do like the thinner housing.
This vis ring is a little bit slimmer.
I think that'd be a better site picture and looks like the pen construction on
the Matthews edition is more robust.
Also you can see that this guy versus this guy,
I think we have a lot more fibers.
I don't know if you guys can pick up all those fibers in there,
but that's going to make for a lot brighter without the light,
which is super important to me.
That was my biggest critique is that this,
these pens were in this hallway and you can see the size of the hallway made it
so that these were dark and I hunt a lot of States where you can't have this
light turned on when you're hunting. I just turned that light on.
So that is the light just on the pens.
There's no light on the bubble.
You can hold it down and now you have another light shining on your bubble and
on the pens.
But if you're hunting over here because of this hallway and I think because they
shrunk that down significantly and added a ton more fiber,
this is a much, I can see those. That's what the light.
So your individual adjustments are right here.
So you can adjust your top two pens and your bottom two pens.
And just like the original,
the middle pin is fixed in the middle of the housing. Same over here.
This middle pin, the yellow is in the middle. You don't move it.
You can only adjust and to get to it was a lot harder. It was back here. Yes,
you could pop these cartridges off, but now you don't have to pop anything off.
You can make your adjustments right there.
That's actually huge because you're right here. You can really control,
manipulate that those top two pins and those bottom two pins versus having to
dig your way to the back here and hit that small little Allen and make these
really coarse adjustments. So that's nice with this three pin.
You had that baby bottom pin in the bottom, that yellow one.
And we no longer have that. And I hated using that pen.
Now we just have a nice clean green, red, green, red, green.
And we have one indicator and you can see the indicators already at the bottom
and you can adjust it however you like. All right guys,
let's talk about how to adjust the first and second axis, which I didn't have to.
But in case you do,
there is a bolt right underneath here that you're going to have to crack.
That's your set screw. That's a nine 64th Allen. Once you,
and it doesn't take much, just kind of crack it nice and loose.
And then you're going to slide over and it's labeled real clearly. It's small,
but you're going to use a five 64th Allen key and you're going to just be able to
turn that. Now, depending on how you turn, this screw is going to move it.
I believe both of the Allen keys are included in your hardware kit.
If you turn this first access screw clockwise or to the right,
it's going to move this scope.
If you're facing this direction to the right or clockwise,
if you turn the screw to the left or counterclockwise,
it's going to move the dual dial assembly counterclockwise as well.
Once you get it set and level the way that you desire,
then you'll just go right over here to this nine 64th Allen and lock it up in
tight. And that is it third access. You're going to want to do, like I said,
at the range somewhere where you have a steep downhill shot or uphill or both.
Ideally your set screw is on top. It's nine 64th.
So it's the same as this first and second access set screw crack that.
So it's loose. And then you'll move over with your five 64th key.
And right here, you're going to turn this right or left.
If you turn it right or clockwise,
it's going to rotate this whole assembly in view of the shooter clockwise.
And if you move it to the left or counterclockwise,
it's going to move your assembly counterclockwise or to the left in view of the
shooter. Really easy to adjust. It is a finite, small little turn.
Do not make big turns. Just turn this screw a little.
Lock in your set screw. Shoot.
Do not make big turns because a little turn will move this a lot.
I would honestly tape a vertical line on your target and just try to hit the
middle of the middle and then adjust accordingly. Super easy to adjust.
If you are going to use the light on this UV slider,
you're going to hit it once and it's going to automatically turn to the
brightest setting.
You can tap it once and it's going to lower it down to a little bit lower
setting. Tap it again, a little bit less brighter,
and then finally tap it again. And that is as low as it goes.
Once you tap it again, it'll flash at you and turn off. All right guys,
we're going to sight in. Here's how we do it with the five pin horizontal.
So you have five pens. The middle green is fixed.
That's going to be the pin you're going to use.
We're going to walk outside here in a moment and we're going to use the middle
pin and we're going to find 20 and I'm just going to take this and move it until
I find middle pin hitting at 20 yards.
Once I do find that I'm going to key in on the backside and these do come off.
So this little plate you can unscrew,
take out and then find your side end tape, which is right here.
And it looks like we have six side end tapes. All we need is one.
We will peel and we will stick that to where our 20 yard red line matches up with
the indicator, the indicator telling us that, Hey,
your middle pin is set in for 20 yards.
Once you have that you're going to still key in on your middle pin and you're
going to just slide down and shoot out at 60 and take your time.
Have a low wind day. Do this several days in a row.
You really want this number to be absolutely perfect if you're going to use this
side in method.
And once you find the number that corresponds with your 60 using your middle pin
take your phone, zoom in, take a picture and see what number that is.
Whatever that number is, is your site tape. You're not done.
Then you're going to take this housing. Okay.
And you're going to take your housing off and you're going to match your pins up
with the exact site tape and then you will basically make your 20 yard,
your actual 20 yard 30 or 30 40 or 40 so on and so forth.
I'm going to do a little matchy matchy on 30 and so I'll just do this process
until I have all these five pins matching with my site tape. Number two,
number two,
I laid this down on there and individually adjusted all my pins to match what I
want, which is 20 30 40 50 60 so I'm going to pop this back in.
Fits really nice. Tighten it.
Then obviously we have our indicator here which we will adjust to be our 60
also our bottom pin, also our slider.
So now that we have our pin gaps the way that we want and everything's set,
we'll put this in and then we need to kind of re find 20 yards,
which will be our home. We'll find 20.
We'll put our dead stop adjusted to it so that we always slide up and at dead
stops at 20 then I will put my site tape on,
adjust my slider and we will go shoot this bow. Test it out. Should be good.
All right. 20 yards, 30 yards, second pin. Okay.
40 40 was a little low. We have to shoot 40 twice.
Snow is about to hit us guys. We got to hustle. So this is 50 yards.
Pretty fun out there shooting the site. Kind of getting a dialed in.
Let's talk about this battery and recharging.
That's one thing we didn't cover and I need to adjust that 50 and 60 yard pen
there off a little bit. So pop this off. I'll make those adjustments over here.
You guys already saw how we do that.
And we have our vis ring and battery and all that.
You guys can see when you pop that off,
you got a micro USB-C or you can just plug it in and charge that guy up,
which is cool. So there's no more batteries. You just have to recharge it.
I don't know how long the battery holds. We'll find out.
We'll do a followup after we use this.
I definitely plan on hunting with this soon. Like this whole setup,
I'm going to take to whitetail hunting right away where I'm going.
And it's legal to use a light, but if I wasn't,
I would just pop this vis ring out and replace it with this guy right here.
And so instead of seeing this, you would have the full white circle.
So basically the site is adaptable to places that allow you to have,
you know, an artificial light in places that do not.
Just follow the rules guys and adjust accordingly.
What I'm going to say and recap is UV has continued to do a really good job on
the site side, very impressed. And I, you guys know,
I've tried a lot of sites a lot. This is up there.
They've really paid close attention to a lot of little details.
The biggest thing for me is the brightness of the UV Matthews edition compared
to version one it's night and day difference.
And that was my biggest complaint. They added a ton more fiber.
There's less of a hallway. The cartridges are compressed. It has a,
it's just, it's probably the best slider out there. I mean,
there's more to test more, more to tinker.
Companies are always pushing each other,
but I wanted to get you guys a full video of us citing this in checking it out
and let me know what you think. It's a hundred dollars more than the original.
I think it's worth it if it's in your budget. And finally,
guys gear does not make you a better archer.
You make yourself a better archer through perfect practice,
dialing in the foundation, the fundamentals, the technique.
So when we cover new gear, it's cool stuff,
but nothing's cooler than doing some serious blank down this winter.
Join a winter league, continue to get your reps,
continue to stay on your grind separations in the preparation.
We'll catch on the next one.
