Bonsai Juniper Shimpaku Seasonal Maintenance work How to trim and refine branches

Bonsai Artistry
5 followers
#bonsai #bonsaiart #bonsaitree #natureart #miniaturetrees #gardening #plantlovers #homedecor #relaxingart #beautifulbonsai #treeart #bonsaimaster #bonsaicollection
G'day YouTube, welcome back to my channel Bonsai Works. It is the start of February here in
Melbourne, Australia. It's summer, supposed to be towards the end of summer but summer goes for a
while here in Melbourne and Australia, they always last longer than they will. But it's time to start
to prune my shimpaku junipers and junipers in general. It's a really good time now, all the
spring growth has hardened off, summer is happening, more growth and then we get a real
bit of a heat spell which actually starts to slow down a little bit of the growth. Even the trees
might have a little bit of a nap or just to avoid the 40 plus degree days we've been having in
Melbourne. So I find that now's a really good time to start pruning, pruning back the long growth or
the healthy growth. Now you need this healthy growth to really grow the roots. So all the
strength is in the foliage in junipers so that creates photosynthesis and then actually grows
more roots for you. So now that it's done its job we can start eliminating it and once we start
eliminating it then the roots then will feed the rest of the tree and the tree will grow again in
autumn. So that's the plan, so it's a bit of a process we've been following and this is the
process I've been following and it seems to work and my trees are responding well to them. But we're
going to do some obviously maintenance work on these trees and we'll start to look at how we can
just bring them back to shape what we need to do remove wire so forth so on so forth remove any
dead branches maybe we can restyle something as well. But let's see I've got a bit of a selection
here let's see what we can do with them. I'm gonna start with this little guy pretty pretty small
tree. It's had a lot of growth there's lots of growth so I need to reduce that it's a really
interesting trunk this is a tree that I really bent and twisted and tried to create something
different with it. Definitely I'm thinking I can't see the the trunk anymore so it's a bit of
an issue. I want to actually maybe try to see and expose that again and clean up the dead wood
things like that we've got a bit to do. So I'm gonna just find what I've done wiring wise because
it's growing quite extensively but let's start reducing I've got to start reducing back this
foliage. So I'm gonna go in and have a close look make sure there's some bit of foliage behind it
and start to eliminate some of this growth it's too much it's probably gone too far this one so
I'm just going to go through and start to eliminate cut back to to a smaller bud inside
that's all I'm really doing so a bit of a bit of a process here but you'll see what I'm it's a
must-need job you can't just go and hedge trim it you'll just kill the tree so and brown it off and
by doing one cut only I'm actually just having one little spot that's going to brown off if you
know what I mean does that make sense so I'm just just starting on this first branch down here and
seeing how far I need to go then I'll look at anything growing down I like to just pluck off
I don't need to cut that off just pluck it off it's easier and the tree starts to take shape already
so I'm just going to find the wiring bit so that's there just go through the tree
and restarting to get this pad back at least try and get this pad back down
at least something reasonable and a bit more maintainable so now we can actually probably see
now you can kind of see dead and live so the live veins on the inside this is the dead vein in here
so it's dirty yucky I've got to clean it up so but I'm working on the foliage that's that's the
first part so I'm going to keep going around and clean up this tree and we'll see how it looks at
the end of it all right here's a quick little view of it before and after I've actually just given it
a trim I've taken all the wire off it now too it's a very cool contorted tree now I do need to
clean up the gin and dead wood but there's a bit of a storm coming so I'm going to wrap it up for
now for today and I'll come back and do the rest of the trees I've gone through all my shimpaku
minis anyway and did the whole cleanup process this is the one I focused on you can see I have
much more reduced tree much more less collage and then I've actually lime sulphured the parts
clean that all up remove why that I didn't need and you know at least now as as the end of summer
comes into the into autumn you get the next flush of growth and should feel out and compact up and
be really nice to look at in this way so I went through all my little trees getting a nice cleanup
everything got cleaned up and removed you know trimmed you know my one of my favorites which
you know all about is this one that's looking pretty good look at that once it's trimmed up
it was quite overgrown long long long shoots everywhere cleaned it up and you know bringing
it back into the right space now the good thing is you also need to check for wire cutting in
so it's a good chance to do that not even making sure there's no wire coming in usually it's mainly
in the apex part but the wires coming in so you need to really look carefully in the apex rather
than the old branches pretty good they will cover quite nicely now let them rest give them
their feed give them water give them sun so just again the process is you clean up underneath the
branches clean all the long shoots but using using you know cutting up once at the long shoot not
not doing a hedge tree thing so that's where we're at some nice little trees this one this
really well nice old tree nice old bit i will have to allow myself and clean up the deadwood
um which i haven't done yet but that's a good one good nice little trees now i'm going to move into
my next next level trees keep trimming my junipers i'll show you the other junipers that i'm working
on at the moment and how they trim them up in a similar fashion so this specimen is much larger
much bigger base almost my hand is the whole nebari but it's a nice compact tree you can see
lots of same process it's really is the same process so i go work my way through the tree
removing the long growth and cutting back to some inner growth inner buds in there
inner buds in there you just got to go through and i'm only cutting once so there's only one
piece that's coming off not not like a hedge trimming ruining the whole tree so
again pluck underneath anything that's going down um i'm happy to pluck the whole
the whole um bit of growth off i'm not not pinching the tips that kind of stuff so really
and cutting back if there's anything dead and then slowly going through it so the same process
as i mentioned there's nothing new check wire mainly the top that's what all the strong growth
is mainly the top check the wire if there's wire on it to make sure there's no cutting in
and you just go through the whole tree come a bit at a time branch at a time
cutting back the long growth it's not rocket science guys it's very easy it's just about
timing right time of year to do it for me end of summer is a good time because that's you get a
new flush of growth into summer into autumn all right i'm going to finish this tree and you can
see the difference so after the trimming technique and cleaning up you get a much nicer tree
no more defined pads as i said it looks a bit more sparse and rough but what happens is the
new foliage grows over the next couple of months and really fills out just perfectly
and really gives it a nice greeny tinge to it before it goes into winter dormancy so there you
go now the technique doesn't apply to just any juniper you can i mean not just shimpaku but
applies to any juniper so this tree is going to get a treatment i'm just going to leave it here
in this spot in the garden rather than bring it out you can see it's long foliage i think it's a
commonness or could be sabino but i'm not sure i think just normal juniper commonness this is a
nice cascading large trunk and you can see the foliage so you can do the same technique here
really cut back quite heavily into nice shape see how it's too long now let's give it a trim
and keep it nice and groomed and now you can see much more thinned out tree
it looks a bit still a bit rough because this is a longer leaf
juniper but get stuck into your junipers now and get them looking ready for the autumn flush
of growth well guys hope you enjoyed the video and i'll see you around for more
