Massive change Shimpaku Juniper Major Transformation into refined old bonsai

Bonsai Artistry
5 followers
#bonsai #bonsaiart #bonsaitree #natureart #miniaturetrees #gardening #plantlovers #homedecor #relaxingart #beautifulbonsai #treeart #bonsaimaster #bonsaicollection
G'day to you. Welcome back to my channel Bonsai Works. It's David here.
Lo and behold, another Shimpeku Juniper. Now it's a non-stop theme here at this time of year,
towards in summer, early winter, I mean early autumn. I like to do a lot of my work on my
Shimpekus. I've done all their growth and it's now time to do some work on them. Now this tree,
I've started this tree in a workshop demonstration for Bonsai Society Victoria
about a couple of years ago. I had a lot of wire on it. I've spent about an hour taking
a lot of the heavy wire off and now I'm assessing this tree. So this tree was pretty straight and
I've bent it right over, trying to create an apex, trying to create an interesting tree.
It's very dull. It's very uninteresting for me anyway. There's nothing really
exciting about it now. If you have a close look in here, you'll see that the tree bows.
I had to get some movement into it and then this was the apex and now it's down here. The apex
is just about here. Now it's down into here. It's really uninteresting. It's not an interesting
tree for me, but I want to get some interest in it. I want to see if I can really create
something more dynamic, more interesting, more thought-provoking and so on. So you know me,
I like to really push the boundary sometimes with these trees and it's a good time to work on them.
Giving it a spin. There's not really much at the back either. Nothing really to talk about.
You can see where the apex is. You can see I've started to create some sort of deadwood
and gins. Now to me, there is some interest in this part, but then that curve over just doesn't
suit it. I need to explain why it's curved over, why something's happened. It's too healthy on
this side. I can tip it. I was trying to do different angles. Maybe I can do a little ratty,
but it's too short for a little ratty. It's just too short and too stocky. So I need to reduce,
in a way, I need to reduce the amount of foliage on this tree and create something a bit more
interesting. Now, does anyone know what I'm going to do? Hopefully you guys can probably see where
the interest is. For me, the interest is in this side of the tree. This side of the tree.
This side isn't very interesting for me unless I was going to move it upright and create some sort
of tree like that, which I'm never, I don't think it's going to work because of that big bend. So
what I'm going to do is a bit more dynamic, put some, I want to get some showery on this trunk
as well. It's a very, very dull and uninteresting trunk. And ultimately I'm going to build the tree
just in here. So having a tree just off here, this will all be ginned. It's a dynamic look,
this tree got killed off all on this side, but now it's surviving over this way and kind of the
roots on being on this side and the movement over this way and forming a tree over here looks okay,
like it looks balancing. And then having it all ginned, I can explain them that this tree
really got killed off from that side and he started to survive on this way, growing this
direction and this in this way. So could use a little bit more tilt, but we'll see how that
happens overall. But that's what I'm planning to do. I mean, I might shock people, but I think
it's the ultimate best tree we can create on this tree. I'm not sure how much of this I'm going to
gin and so on, but I'm going to do my best. I'm going to keep all these branches that are around
in here and all the rest, all this is gone. So this whole tree is gone. Now the tree's pretty
healthy. You can do this kind of work. It's been repotted over a year ago, so there's no problem
with repotting and health of the tree. Lots of nice, healthy growth. You can see how much growth
that's on this side of the tree. So really, I'm just going to get started cutting all that back
and starting to work through ginning. I'm not going to have massive gins. I don't think I'm
going to have reasonable gins for the size. I mean, I've bent and twist a lot of these branches
anyway, so we'll see how I go and how long I'm going to keep them. Now there is some wire still
on these branches because I wasn't sure if I'm going to keep them. So I'm just going to hack
away until I'm happy where the length is and then I'll gin all these off. I can use cuttings if I
wanted. I might find some nice little ones that I'll enjoy. So by bending and twisting before,
see I've got bends and stuff in this tree, so it's pretty quick. So I'm going to go away and just
keep hacking away, take all the wire off that I need to, but I'll just chop off all this stuff
so you can see where I'm going to end up. So has anyone fainted yet? No. As you can see,
I've still got a wire on this tree, but I've just cut it all off with my branch cutters that can go
right through aluminium anyway, and then I'll have to take off some other wire later. But you can see
it gets right through easily anyway, but I will have to take off that wire and gin. It's such a
big one. So that's the tree. I'm done. No, I will wire all this now in place, gin all this off,
make all nice gin, shari. I want to get some shari possibly happening on this inside here,
just as I'll start a sliver up this way, because this side of the tree should survive. All these
branches are on this side of the bark, so this side should survive. This side will eventually,
hopefully, die off, and that's how we're going to do it. So that's going to take me a while to
gin all this, so I'm just going to go through ginning, take the bark off, gin what I like,
what I don't like, trim things back, and then we'll see how it looks, and then I'll start
wiring this up. Okay, so lime-sulfured the tree on this side. This is how I've kept the gins
and the shari. Now, I have started a shari, a little sliver that comes down the middle around
here. It's just a nice thin sliver. Now, I'll open that up over time. I haven't lime-sulfured
that section, because what I eventually will do, I'll expand it out to more to the front
and make it a bit wider out here, so you can see it further. But I've just started it in
the middle there, just to open it up and slowly get the shari started. Now, I'll do a little
sliver, because then next year it folds over and regrows, and then you sliver open it a bit more,
so it creates some nice layers. It creates a deep lime and a one barb, and so on. It creates
a more natural-looking shari. In the meantime, I have wired the rest of the branches, and I'm
going to start to place them. I only haven't wired this small little one, because I don't think I
need it, but I'm just going to slowly place these. I'll have to look at the trim myself to see where
I'm going to be. Now, I'll just use aluminium. I'm just going to try and place where I think
these branches are going to be. I want a nice compact tree, too, so we'll see what I can come
up with. I might have to do a bit of trimming. That's understandable. So, just setting the first
kind of layer in here, just sitting in here somewhere. Probably want to be close, if I can.
Now, as I work my way up the tree, I'd like to create another pad, if I can,
see how it all fits together. Now, I'm taking the branch at the back,
and try and bring a round mord to the front to create another pattern here,
with a bit of depth, as well. So, with just a bit of depth, but not too extravagant,
come in here, see how it all fits. See if it's too big, but plucking underneath as I need.
Now, I'm trying to decide if I'm going to make this the apex, or bring this one up here at the
back towards the front and make the apex. So, since I've got kind of the room, I probably can
shrink this down. Maybe, I'll probably get this as the new, kind of, in here as the apex.
Anyway, so, that was me quickly putting things in place, just having a quick positioning. I'm
going to take a closer look, but that is by fully wiring the tree, and then creating a little apex
in here, and a lower branch in here. This branch is probably too heavy at the back. I'll probably
reduce it a little, but I think it's a much more dynamic tree, much more interesting tree. Now,
I'm just going to clean it up, and I'll show you the final product when I'm done.
All right, so, here's the tree after I've finished cleaning up.
Cleaned up underneath, tried to make the pads a bit more refined.
The angle of the pot's slightly different, slightly offset now. It's not directly,
I think it was back here. I think I like it just slightly offset in there now,
so you can kind of see into the curve, and then nice branching over here, and nice branching over
here. So, ideally, beautiful, like, nice little pot for it. Much smaller, of course, probably
cascade-y round, I'd say, would be really nice on this tree, if I can find one. Unglazed, of course,
but a really nice tree. Much better than before. Before was kind of,
whatever. Not really much going on, too much going on over there. Now, something of interest.
There's a reason why the tree died off on that side. Something happened. It's killed off even
some of the trunk, and the foliage is starting to grow out this way. I have refined the foliage to
make it look nice, but you know what I'm trying to say. More defined foliage, more defined pads.
Over time, just keep this in shape, in trim. Pretty much, don't do anything to the tree for
now, other than water and feed, over late summer, autumn, and the tree should come out pretty good
for repot in the early, late winter, early spring time, and that should be it. Other than that,
I'm pretty happy. A little spin for you. I reduced a little bit at the back. That back branch,
showery there. Back to the front. Hopefully, these two are lined up in the camera.
I put two little wires lining them up, so it lines up when you look at them,
and that's the tree. Well, people, hope you enjoyed the video, and we'll see you around for more.
