How to Turn a 3-Year-Old Tree to 25-Year-Old Bonsai

Bonsai Artistry
5 followers
#bonsai #bonsaiart #bonsaitree #natureart #miniaturetrees #gardening #plantlovers #homedecor #relaxingart #beautifulbonsai #treeart #bonsaimaster #bonsaicollection
I mentioned this is my 25-year-old seedling that I got from an arboretum and I planted
when it got to a certain size, I planted it in the ground and I dug it up maybe five years ago
and that's what it looks like. You can see it's good all around and today I want to again show
this side-by-side to show what does it take to turn this tree into that tree.
And the tools I need is nothing more than a growing pot, a bonsai pot, my handy-dandy clipper,
a scraper, this is actually a meat hook. People use that to move big carcasses of meat
but that's perfect for bonsai and it's inexpensive. You can find them in a restaurant supply house
and then that's a pruner. And so this is a two and a half year old tree and then eventually I
want to show you as I move it into bigger pots and put in the ground, it will eventually get
to that thickness. This is about, I would say it's not quite a three-year-old tree.
So the Trident Maple grows pretty rapidly and I also want to point out
that the leaves are quite big in the beginning like this young tree but you can see they reduce
eventually when it's got a lot of ramification, it reduces to this size. You see how small it is?
Elm, Japanese Maple, Trident Maple, Selcova, they all reduce leaf sizes, reduces to small
leaves and that's why they are chosen, their choice bonsai material, they've been proven to
work over the years so that you can have a big tree with the right scale of leaf size. So let
me take this out of the pot. I struggle a little bit to get it out of the pot because this soil is
very clayey. You can see this soil is very clayey. That's why the plant is still stuck and yet
the tree did really well because Elm and Trident and so forth are very hardy trees.
They can overcome almost any kind of soil you use, it's good. So you can use sandy loam, garden,
tough soil or whatever and it should work fine. But you can see this tree a year ago was no more
bigger than this but now it's quite big and so they grow rapidly and I want to see the roots
because the first step of a tree is the roots because if it has no good roots it will never be
right because you can't change the bottom of the tree whereas you can change the top branches
quite readily. So you want to make sure the roots are coming out radially like a tree that would
be growing in an open space. So if you look close up you can see this is coming down and then this
one is coming out. Not quite but I think there's a little pink but eventually this will be okay
will thicken. And then on this side you can see there are roots growing out radially this way
and roots growing out radially here. Typically it will if not it eventually will. So the rootage
is pretty good. So now let's take a look at what we can do with this tree. So for example you can
see this tree has a little bit of a curve although I don't like this curve because it's kind of wimpy
you know it's kind of an arch you want it to be straight. So what I'll do is I'll try to not break
it but try to bend it a little bit so that it's straight. You see it's less curvy now and then what
further I can do is if I clip it up here you see now it's totally straight you don't see the curve
anymore. So that's the kind of a trick you can use to to shape the tree. So right now for example
I can imagine this tree to be this tall with this being the apex and I will I can clean off
a little bit of that so that it will grow out nicely it will heal. So that would be a tree that
if you look at this from this angle you can see it goes up comes down this way and then these
will come down and you will have a tree that's a fairly standard in size in shape. Now I like
the tree to be like this so for example you can see that I need to manage these roots like this
root is coming down nicely but then there's that one going to the side so I'll clip this off
and maybe pull this one out so that it will eventually be a big root. So you can see I would
prefer more like this tree where it make a turn a much bigger drastic turn than that
and then another turn another turn so with that in mind then what I will probably do is the following
I'll plant the tree this way so now the tree is going like like this and then start to go up
and then I have to cut this off by saving some of these branches for coming out to the side.
So you have to be pretty brutal you say oh my goodness what am I doing to my tree well unless
you do that you're never going to get to your objective. So I'm basically telling you that
there are two ways to do this tree one is to kind of accentuate this very minor curve
the other one is to create a totally different curve in a sense a different design that's more
akin to this one. So now I will be very drastic cut this off and this is a not a very good cut
because it's a stump that would prevent it from heal over really well so I do it one more time
to give it more of a slant leaving this little piece that will make nice and this will heal over
and in fact I should give it more of a cut like a slant. I want to be very rough so that it will
heal just as it broke naturally and then I'll cut off this little stump you can see this little
handy dandy clipper which we will make available to you when we start selling products it's almost
the only cutter I need for anything. So you can see this is redundant I guess I can leave a loose
but so that it may shoot out in the right angle I don't know and then this one's definitely
underneath the the curve so I cut that off and now this is a little bit of wimpy curve
so I try to straighten it out without breaking it you can wire it too to straighten it out
but again I don't need to spend that time and worry about removing it to not girdle the tree
and so I think that's fine enough I can eventually push it down in fact I can do it now
now I should cut it off here but I cut it off here so they will grow a little faster
and now I can see these are too much I don't need them but I leave a little bit so it will go out
and same here
the tree will come up like this come this way and then come this way I can bend it up a little bit
if necessary and I cut it off here so that's the apex and then I want this branch to come out so
I cut it off here these but will come out so okay this is the first stage of turning this tree into
this tree so the tree will basically be let's say a little bit this way so this is pointing up
and then this is pointing down by pulling a little bit further right and then this will be coming up
and that's built on that as it goes so that's how we'll put it back in the in the bonsai pot
so eventually I would say in five years this tree will be about this thick it's looking pretty close
to this but if you like at this stage you can put it in the ground or put in a much bigger pot let
it grow and in 25 years you will have this trunk so that's the process of creating a heirloom master
bonsai it just takes time there's no shortcut because it takes time for the tree to grow
so you can see that's what I have to do to turn to make this tree to begin the journey of this tree
to become this tree and so the question that's asked again and again should I put in the ground
or should I put a bigger pot I think the answer is that depending on how big the tree trunk that
you want it to be if you want a trunk to be reasonable size grow in a big nursery pot
so you don't have to take it up again and disturb the roots and you know start over again so to speak
but if you want a trunk like this size then you almost have to put it back in the ground
and then keep chopping the big branches as they grow because you can have a long shoot coming up
this way you know 10 feet tall in the ground and that's that's why you make the trunk
thicken very quickly so I share with you all my secrets to create this heirloom bonsai so you can
see I straighten out this branch and tilt the tree so this is more or less pointing up at least
towards that direction so I can make a turn and turn and turn to build it up so using the clip
and grow method it's really give you a free canvas that you can create you can add to it
just like you do a painting to create anything you want and so the objective of this tree
is to turn into this tree in 25 years and I think I'm not going to live over 100 so therefore
my objective is going to be shorter to be consistent I will probably shoot for this to
be a very good bonsai in five years and I will do the follow-on for you to follow to see how
the tree develops thank you very much with that in mind I hope you enjoyed this video
and if you think I'm being I'm good at it in a sense I'm being informative
please click like I enjoy the encouragement and subscribe to our channel so that we can
notify you of any new announcements stay tuned till next week thank you very much
