Episode 140: In 1959, Lionel’s design team went fishing for a new operating car design - literally. The #3435 Operating Traveling Aquarium Car used a mechanism similar to the #3444 Animated Gondola Car to create the illusion of swimming fish inside a boxcar with special display windows on each side. A Lionel Vibrotor vibrating motor triggered a spring assembly that pulled a 35mm film around two sprockets. The film contained images of undersea life and the image was backlit by a pair of light bulbs. Waves in the display windows added to the illusion of movement and rippling light while looking underwater.
Drawing power from the track, action continued anytime the power was on - regardless of whether the train was in motion. Therefore, the original aquarium car could be parked on a powered siding and still thrill layout viewers. However, the Vibrotor motor can be quite loud, and the combination of motor and lights makes these cars a power-hungry lot, so a 75 watt transformer should be considered the bare minimum for operating one of these cars - and for a trainload of them, you’d better have a big ZW transformer! These cars do have an on/off switch so they can be run without fish action if desired.
Many operators at the time thought Lionel’s design was all wet, and production ended in 1962 after a four-year run. However, time has shown the car to be a crowd pleaser and eventually the car become a whale of a hit for the firm.
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Keep the trains running!
**As an Amazon Associate and a member of the eBay Partner Program, I may receive commissions on qualifying purchases of items from the links below.***
A look at Lionel's traveling aquarium cars and their descendants
on this episode of Toy Train Tips and Tricks.
In 1959, Lionel's design team went fishing for a new operating car design.
Literally.
The number 3435 operating traveling aquarium car used a mechanism similar to the 3444
animated gondola car to create the illusion of swimming fish inside a box car.
With special display windows on each side.
A Lionel vibe rotor vibrating motor triggered a spring assembly that pulled a 35mm film
around two sprockets.
The film contained images of undersea life and the image was backlit by a pair of light bulbs.
Waves in the display window added to the illusion of movement
and of rippling light while looking underwater.
Drawing power from the track, action continued any time the power was on,
regardless of whether the train was in motion.
Therefore, the original aquarium car could be parked on a powered siding
and still thrill layout viewers.
However, the vibe rotor motor can be quite loud and the combination of the motor
and the two light bulbs makes these cars power hungry.
So, a 75-watt transformer should be considered the bare minimum
for operating one of these cars.
And if you want a trainload of them, you'd better have a big ZW.
These cars do have an on-off switch so they can be run without fish action if desired.
Many operators at the time thought Lionel's design was
all wet and production ended in 1962 after a four-year run.
However, time has shown the car to be a crowd pleaser
and eventually the car became a whale of a hit for the firm.
I'll stop with the fish puns sometime soon.
The first reissue of the car was the MPC number 9308,
essentially a carbon copy of the original 3435,
except for the number and the MPC-style trucks.
Like the original, this car had a four-year run
from 1981 through 1984.
Then the waters of Lionelville were quiet again for about a decade.
In 1995, Lionel made a big splash and modified the mechanism of the aquarium car.
Like the retooled animated gondola car,
the number 16681 aquarium car featured a worm gear drive instead of the vibrator.
With this drive, the fish are in motion as long as the train is in motion.
Illumination was now provided by a single bulb powered by a roller pickup on one truck.
Action is quiet and reliable, although limited to when the train is in motion.
As with the animated gondola car,
this new drive system led to an explosion of aquarium cars,
with no fewer than 50 different variations having been made since 1995.
In addition to the aquatic cars,
some aquarium cars now feature Christmas or Halloween scenes,
various licensed characters,
or anything else Lionel's designers wanted to showcase with motion.
Let's take a look at a 1996 version.
Okay, so turning here to our 1996 Lionel catalog,
and here we have number 3435,
the Gilfins Trout Ranch aquarium car.
So the idea here is that the aquarium not needing their display car year-round
to help raise some extra funds,
they would lease it out,
and in this case leased it out to Gilfins Trout Ranch of Hydro Oklahoma.
By the way, quick research shows not only is Hydro Oklahoma a real place on the old Route 66,
but it's very well known for fishing, particularly trout fishing.
Now I didn't see a Gilfins Trout Ranch,
but apparently it is a hot spot for fishermen.
So here is the car,
and so the catalog says 3435,
and I believe it's actually marked on the car to kind of pay homage to the original aquarium car,
but we see the actual catalog number right here, the 16742,
and taking a look at this box,
I don't think this has ever been opened.
There's no evidence here these flaps have ever been opened.
So am I going to take a car that has been,
you know, basically mint condition for more than a quarter century,
and take it out of the box?
Well, yes I am because, well, that's what I do.
So let's unbox this thing.
Recycled.
That was a sign of the times starting in the 90s,
and let's see what we've got.
All right, so before we take it out of the wrapper,
we see the original catalog number 3435.
The coloring is very reminiscent of the original.
So again, this is kind of to pay homage to the original car,
but update it,
leased to, you see the traveling aquarium,
leased to Gilfins Trout Ranch,
Route 66, Hydro Oklahoma,
all trout all the time,
and then of course now we see the built 1996 by Lionel.
So let's take it out the rest of the way,
and of course the big difference between this and the original
is that the original used the vibrator motor,
whereas this one uses...
Right underneath here we should see the gears.
So again, here is the example of the second mechanism.
This is similar to the gearing system
that has been used for the animated gondolas.
The aquarium car never had a rubber band drive version.
Good for that.
So we have the vibrator version,
we have the geared version,
and then there's the aquarium display version,
which doesn't actually have any moving parts.
But here, so as the wheel turns,
it engages the gear,
the gear drives the fish,
and then on the other side,
here's our center pickup,
we are illuminated,
so that the background here is illuminated
so that you can see the fish moving.
So as the car moves down the track,
the fish rotate on the film,
and here you can see the sprocket on the end,
this time with 35 millimeter film
instead of 16 millimeter,
like the animated gondola.
And so there's our two sprockets,
and so the fish travel around the aquarium
as the car is in motion.
So they do give you a diagram here
for how to take it apart
in case you need to change the center light bulb.
So we remove the screws,
we've got the screen,
and we have the film going around,
and we have one light bulb in the center.
Notice it's tied off with a wire tie,
so it would be pretty simple
to replace this with LEDs
if you wanted to do so.
And we have the official part number
of the bulb, 600-8352-311.
And make sure to lubricate the worm gear.
They of course recommend Lionel's Official Grease.
I'm going to put just a little bit
of plastic safe lithium grease on here,
and we'll go from there
and throw it on the layout
and see what happens.
Okay, so as you can see,
the light is independent of motion,
and you saw it flickering a little bit.
This is at full power with no locomotive on.
I would probably replace the single bulb.
I'm probably going to take this apart
and put in an LED strip
so that the lighting is more even.
Across you see how it's all
centered right here,
and then it's dimmer on either side.
I would prefer more even illumination.
Also with LEDs,
I can get more light with less power.
If you really wanted to,
you could go in and add a capacitor system
to eliminate the flicker.
In this case, I'm not too bothered by the flicker
because the fish are still moving
while the car is moving,
even as the light flickers.
The advantage of this version
is you don't get the buzz of the motor
like you have with the post-war version.
Disadvantage is you just can't park it on a siding
and watch the fish move.
The fish only move when the train is in motion.
Also, it's recommended that you use the geared end at...
Where are we?
That you put the geared end
at the rear-facing side of the train
and avoid reversing as much as possible.
So we've seen it in action on the layout,
let's take a look under the hood here.
And to gain access,
we have one Phillips screw at this end to remove,
and that will give us access to taking the shell.
Okay, and then lifting,
we have a tab, well, two tabs actually on the other end.
So here you see the display area
is just a piece of clear acrylic.
Now, the original post-war versions,
the glass had a little bit of a wave to it,
which helped with the illusion of movement of the fish.
This one has just clear straight.
Okay, and here you see the sprockets
wrapping around our film.
And again, the film is wider
and the sprockets are both greater in diameter
and in height than they are on the animated gondola car.
And if we look down in here,
we have a single light bulb.
And there you can see them are the two wire nuts.
So if I decided to swap this over to say LED lighting,
it would be very easy to go in there and access the lighting.
And then this piece is of course the background
that provides not only our kind of a watery background,
but also helps to diffuse the light.
Now in the original post-war version,
there's a center post with a light bulb on either side,
two light bulbs.
And then of course with the vibrator motor,
which would be on one side,
causing the sprocket to rotate.
And then underneath you would have two pickup wheels
for the motor and the lights.
As with the animated gondola cars,
some premium motorized versions of the car
have been produced in the 2000s.
This time utilizing a small can motor for propulsion
rather than the original vibrator.
There has even been a super premium version
with TMCC command control.
These cars feature command operation sound
and TMCC controlled couplers at each end.
These cars are recognizable by the large rectangular box
under the car to house the command receiver and speaker.
Also like the animated gondola,
a bare bones version of the aquarium car also exists.
No, this time Lionel did not use a rubber band drive,
but instead for this car, no drive at all.
This car known as an aquarium display car
had no action or lighting whatsoever.
The illusion of movement is provided
only by holographic decals placed on the display windows.
When shopping for an aquarium car,
check the underside of the car.
If there are two roller pickups and no gears,
you have a motorized version.
Either an original vibrator or a can motor.
And if it's the vibrator,
you can see part of the motor protruding
through the bottom of the car.
If there is one roller pickup and one geared truck,
you have a modern geared version of the car.
If there are neither gears nor pickups,
then this is a holographic display car.
If there's a large rectangular box under the car,
it's a TMCC command control version.
The tooling for the number 3435 aquarium car
was later used for other non-operating purposes,
namely the number 6445 Fort Knox Gold Reserve car
of 1960 through 63,
and numerous other reissues as well.
A King Tut car comes to mind as one example.
Is there a prototype for the traveling aquarium car?
Well, there are specially designed railroad cars
for transporting fish and other aquatic life.
Several state wildlife agencies use special tank cars
for transporting and stocking fish to remote areas.
And additionally, Chicago's Shedd Aquarium
has used several refurbished passenger cars
to transport marine life long distances in style.
One of these cars, the Nautilus,
is currently on display at the Monticello Railway Museum
in Monticello, Illinois.
However, these cars are for the transport of fish,
not for display.
An actual traveling aquarium display on rails?
Well, that would not be practical in real life.
But in Lionelville, anything is possible, right?
I hope you've enjoyed this video
as much as I've enjoyed making it.
And if so, please like it, share it, subscribe,
and tell your friends and neighbors.
Keep your trains running and your fish swimming,
and we'll see you next time on Toy Train Tips and Tricks.