If you’ve followed my previous videos you know that one of the tricks that I use to expand my Lionel Trains O gauge roster without deflating my budget is to swap multiple model shells on one or two chassis. This allows me to add variety to my roster without the expense of purchasing a fully-functioning locomotive. Also, by purchasing shells of of non-functioning models. Or shells that have been previous customization projects for other owners, I can easily customize these shells without ruining any valuable collectibles.
This project is a former Lionel Postwar Santa Fe switcher that had been repainted by a previous owner. I wanted an NW2 in the classic B&O “Blue dip” scheme that was introduced in 1964, as I saw many of these in my youth. Most of B&O’s NW2’s were the same early version with the high, curved cab windows as depicted on the Lionel model, so that’s a plus! Getting decals for the switcher was not a problem, as I found this set of Microscale O scale B&O/C&O diesel decals on eBay for about $15 with shipping. So, I was ready to go - or so I thought.
**As an Amazon Associate and affiliate with other supplies, this channel may receive compensation for purchases from some of the links on this channel.**
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Another paint shop project on this episode of Toy Train Tips and Tricks.
Hello again, this is Mike with another episode of Toy Train Tips and Tricks.
I spent my Christmas holiday rearranging and reorganizing my basement, and I've finally reached
the point of getting things back in order, or at least enough in order to get a few projects
off the workbench and onto the layout. If you've followed my previous videos,
one of the tricks I use to expand my roster without deflating my budget is to swap multiple
model shells on one or two chassis. This allows me to add variety to my roster without the expense
of purchasing a fully functioning locomotive. Also, by purchasing shells of non-functioning
models or shells that have been previous customization projects for other owners,
I can easily customize these shells without ruining any valuable collectibles.
This project is a former Lionel post-war Santa Fe switcher that had been repainted by a previous
owner. I wanted an NW-2 in the classic B&O blue dip scheme that was introduced in 1964,
as I saw many of these in my youth. Most of B&O's NW-2s were the same early version with the high
curved cab windows as depicted on the Lionel model, so that's a plus.
Getting decals for the switcher was not a problem, as I found this set of microscale
O-scale B&O C&O diesel decals on eBay for about $15 with shipping, so I was ready to go,
or so I thought. First, I simply stripped off the old paint with my favorite concoction of
and I began again with a fresh shell. Purple degreaser works well on post-war models,
but different paints require different strippers. I've also used isopropyl alcohol or even spray
oven cleaner to strip some models. After a quick strip and some minor sanding to remove the last
remnants of the heat-stamped lettering, it was time to paint. Fighting the B&O blue was tougher
than I thought it would be. As with the Conrail engine I painted a few months ago, I had samples
of several different shades of blue and tested them on a scrap piece of plastic. I thought the
rail center dark blue number 0020 looked good on the sample, but for some reason when I sprayed it
on the NW-2 it looked much too light. As in the right family of colors, but as if it had been
sitting out in the sun and faded for 20 plus years. I ended up instead using a rattle can
of Rust-Oleum Midnight Blue, which seems just a tad dark, but I'd rather have it too dark than
too light. In the real world the shade of B&O blue on diesels varied somewhat, so either choice would
probably look okay in the end. By the way, I know that some of you are asking about using spray cans
in my indoor spray booth. Well, with the rearrangement of my basement, my DIY spray booth
is now directly under a window, so I can vent these noxious fumes outdoors, even in winter,
if I can stand the cold air coming in from outside. By the way, to see how I built my booth,
see the link in the video description, or depending on how you're viewing this video,
the link may be appearing in the upper right corner of your screen now. After the second coat
of paint dried on the model, I applied a coat of Rust-Oleum Clear Gloss. Any high gloss finish will
work, as long as it's compatible with your paint finish. This gloss will make the clear portion of
the decals match the sheen of the model, as well as provide a smooth surface for decal application.
Don't be too concerned if the high gloss finish shows every scratch, blemish, and imperfection
on your model. We will fix this later with a coat of Dull Coat. Once the gloss finish is dried
completely, it was decal time. I'd like to pause for a moment and ask that if you're enjoying the
video so far, please like it so that YouTube knows that you enjoy this kind of content.
Also, subscribe to the channel for more great videos, and leave a comment about your favorite
customization project. Now, back to the video. Decal application is both easier and more
frustrating than you may think. The easy part is getting the decals off the sheet and onto the
model. If you wish, you can simply dunk them in water until they separate and apply them. However,
if you want a more satisfying application and a more finished look, I suggest using Microset
and Microsol. Have your reference photos handy to double check the decal placement.
First, trim the decal from the paper with an X-Acto knife or another razor knife,
close to the printing, but leaving a small visible border. Then, drop the decal in a
container of warm, not hot, water to dissolve the decal backing. After a minute or so,
the backing should release from the decal and be ready for placement. While the decal is soaking,
use a small brush to apply Microset to the area where the decal will be placed.
Use tweezers to remove the decal from the water and place it on the model.
By now, the backing should release from the decal, and you should be able to place the decal with a
small brush or a cotton swab. Use the brush or the swab to work the decal from the center outwards
in all directions to remove air bubbles and to seat the decal, and to get the decal exactly where
you want it to go. That's the hard part, positioning the decal without tearing it.
Be patient. I find that numbers are particularly tricky, as they need to be aligned and spaced
properly. If you must move the decal, and neither the brush nor the cotton swab is doing the trick,
you can use tweezers or a toothpick, but be very careful not to tear the decal in the process.
Once the decal is in place, use a dry cotton swab to gently remove any excess water and
solution. Then, use another brush to apply a coat of Microset, again working from the center
outward. This will further dissolve the decal backing and conform the decal to the model
surface. Wait 5 minutes or so to check your results. Apply another coat of Microsol if needed.
This particular microscale decal set was an old batch, and I did have a slight problem with the
decals tearing, particularly the B's. But with patience and a little bit more Microsol, I was
able to repair the damage to my satisfaction. They're not perfect, but close enough.
Repeat the process for each decal on the model. I placed the B&O text, the numbers, and even the
dome logo on the radiator, which, thanks to the Microsol, turned out better than I anticipated.
It sunk right into that radiator grill. Once all the decals are in place, spray the model with a
coat of Tester's Dull Coat. This will remove that glossy shine from the model and decals,
and helps the remaining decal film blend in with the model surface. Allow to dry for an hour or so.
If desired, more Dull Coat can be applied. Finally, remove the masking from your windows.
In this case, there's no windows or headlights to worry about. Later on, I'll use my tape and
Elmer's glue window trick. If you missed that video, see the link in the video description,
or check the upper right corner of your screen now. Reassemble the model, and you're finished.
Now, this B&O shell will be splitting time with my Erie, EMD, KD, and some other still
unpainted shells on three different NW-2 frames. Because of this, I did not paint a yellow stripe
on the diesel frame, as was the B&O practice. At least not yet. I may decide to assign a single
frame to this shell, in which case I will paint the frame accordingly, and I'll add some working
headlights to each end. I'd like to add that this episode would not have been possible without the
lifetime of photographic work performed by my late friend Jerry Hodapp. Jerry documented the B&O,
Chuzzy System, and other railroads from the 1960s through the early 1990s, and his vast
collection of photos have been a priceless treasure of research materials for me and for
others in the railfan community. And there it is! Don't forget to tell your friends and neighbors,
keep the trains running, and we'll catch you next time on Toy Train Tips and Tricks!