If there's one feature that most people associate with Lionel Trains' O and O27 gauge steam locomotives, it must be the operating whitle. When Lionel first introduced the remote-controlled operating whistle in its trains in 1935, it was absolute magic. Even today, with realistic digital sounds in many locomotives, there's something about the sound of the classic motor-driven air whistle that makes everyone feel like a kids again!
Follow along as I show the parts of the Lionel whistle, how they work, how to maintain them, and how to troubleshoot and repair them when things go wrong. ' **As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
#Promotion#Lioneltrains#Trainset#Trainrepair#Traincollecting#Ogauge#Oscale Picking toy trains from trash-worthy to train-worthy is often easier than you think! This video demonstrates the process of a complete restoration, starting with a collection of filthy and rusty train cars. We'll show you how to clean and potentially salvage parts from these neglected models, bringing a vintage train back to life. Keep the trains running!
AI Generated·May contain errors
How to bring a wimpy whistle
back to life on this episode of Toy Train Tips and Tricks.
Yes, the sound of a classic Lionel air-powered whistle. It's as magical a sound today as it was
when first developed in 1935. And whether pre-war, post-war, or early modern era,
any of these air-powered motorized whistles have many features in common. And with just a little
bit of care and maintenance, you can keep these whistling just fine for many, many years.
So let's take a look at the parts of the whistle, how they work, what to maintain,
and troubleshoot a few things when they go wrong. And here we have before us a collection
of different Lionel air-powered whistle tenders. Modern whistles are different as they are an
electronic sound that is generated by the locomotive or tender. But in the case of the
original Lionel whistle tenders, there actually is an air-powered whistle that is driven by a motor
inside. They come in different shapes, different sizes. Some motors are mounted horizontally,
others are mounted vertically, but they all share certain characteristics. And so we're going to
open these up. Some of these have been maintained more recently than others, and so I'm going to
pick one of the ones that needs a little help. I think that's this one. Yeah, this one I think has
a stuck relay. Yeah, I don't even have to hit the whistle button for that one. So I'll work on the
for that one. This one I think is in good shape. Let's test it. Yeah, this one is in pretty good
shape. Might need a little bit of lubrication on the motor. This one, likewise, I think works pretty
well. Oh wow, hear that gear grinding? Yeah, it sounds like they could all use a little bit of
lubrication. So I'll take these apart and take a look at them. Now this one, this is a pre-war
version that I just, that just came today. And this one's going to take some work because I know
for sure from testing it, there's a short circuit in there. So I'm going to take it apart. And so
this one's going to take a little bit more work. But this one is from 1940. So let's start with
this one. This is the box style tender. And for this one, the first thing you need to do is remove
the shell from the chassis with this Phillips screw right here. Keep that screw handy. Pop this
off. And here are our major parts. We have roller pickups to the center rail. This is important to
power the motor. Also the ground comes through the frame and through the outside wheels. Here
is the motor, just like a small locomotive motor. It has the armature. Here are the brushes. So
that's what you heard making a grinding sound. Here is the relay. This is the part that turns
the motor on and off. When the motor spins, it drives an impeller here, which pushes the air
through the whistle chamber and out here. And that gives us our whistle sound.
The whistle chambers, since they were not meant to be seen, are generally cast in whatever color
plastic Lionel has left laying around. So you can often get some interesting stripe variations on
these whistle chambers. Lots of different colors of plastic involved in that casting. So you can
see when the relay is activated, the contacts come up, complete the circuit, and turn the motor on.
So when does the relay know when to activate? Well, through an ingenious method, Lionel trains
traditionally run on AC power. Through a method of applying a DC offset to that AC wave,
a special what they call a slug relay, reads that DC signal and activates the relay, which turns on
the motor. So without that relay and without that DC power, the whistle will not sound.
Consequently, if you are running on DC power instead of AC, your motor is fine,
but the relay will activate continuously so the whistle will blow all the time.
So now that you see the basic parts and how they work, we are going to take the plate off here,
here are the brushes, and we are going to get in here and take a look at our armature, an armature
plate, and we are going to lubricate our armature shaft and the bearings here so we don't get that
grinding sound. Lionel's favorite nuts were quarter-inch, whoops, wrong side, yep, there we
go. So we are going to remove these two quarter-inch nuts and we will be able to pull off
the armature plate. Okay, let's give a little wiggle, try not to disturb the wiring on either
end if you can avoid it, there we go. So our armature face, you want it bet to be as shiny
and coppery as possible, and notice all of the black scoring on there. So that's going to have
to, where am I, that's going to have to come off, and the best way to do that is with cotton swabs
and alcohol. So with some cotton swabs and some alcohol we've rubbed on here, and now look how
shiny that armature face is, nice and clean. We are going to get good electrical contact there
now. So now I'm just going to put my motor back together. The brushes themselves seem to be in
good shape, so I'm not going to worry about replacing those. They usually are because the
amount of time that the whistle blows compared to how often the motor runs is significantly less,
and so you generate a lot less wear on the brushes for the whistle than you do on the locomotive.
I need to put the springs in first, and then the brushes with the big flat side towards
the armature facing the little end on the spring side. Let's get that and seat it in there.
Same thing here, and yes your fingers are going to get very dirty doing this.
And now the fun part, trying to put everything back together without breaking any wires.
And without losing your brushes. This is always the hardest part of working with any lino
motor, is getting it, getting the brushes, the brush plate reassembled.
It goes in that hole, and this wire needs to get out of the way, and that goes in that hole,
and we're together. Woohoo! Let's give it a spin just to make sure we are good.
Now before I put the nuts back on, I'm going to go ahead and lubricate this shaft
for oil. This is actually zero w30 motor oil that I've put into small bottles.
This is actually the recommended oil for my sterling kit steam engine kits,
and I figure if it's good enough to keep a steam engine running, it's good enough to keep a model
running. You can also use Label or EasyLube or other hobby lubricants. It's a very light oil,
and put it right there around that bearing. Not a lot, because it's just going to attract dirt.
And give it a spin. All right, just to make sure everything's good there. All right,
let's put our nuts back together. And before we put the shell back together,
let's make sure it's going to work. Uh-oh. Do I have a short circuit here? I think I do.
There we go. Yeah, these two wires were touching here, and that was causing a problem.
So let's put the shell back on, and this one is ready to roll.
Let's do some troubleshooting here. So I'm going to hit the button.
Okay, I can see the relay moving when I hit the button. I think it's just corroded.
Aha! A motor comes to life if I hit it just right.
Okay, so if I jump it, it works. So that tells me it's just dirty. So let's work on cleaning
this thing up and see if we can't get it looking like new. So here I'm running the
whistle continuously at a lower voltage, just to get the motor used to running again.
All right, let's see if that helps when I hit the relay. No. Okay, I still need to clean up
these contacts a little bit. The relay is moving, but not enough to make contact on its own.
So my next step is let's get some electrical contact cleaner in here. I'm just using some
isopropyl. I cleaned the relay contacts. I cleaned the rollers. I cleaned the wheels.
While I was under there, I oiled the ends of the rollers and the wheel axles as well,
so it runs smoother. And now it will activate without the help of the screwdriver.
But it's still a little anemic, so I'm going to have to get in here and clean the motor as well.
And after removing the brush plate, that is one pretty filthy
armature there. So let's try to clean that up. And I think that's a lot of our problem right
there. So some more q-tips and some isopropyl, and let's see if that'll work. And then we'll
go to more extreme measures if necessary. Okay, that's not too bad now. Nice and much
shinier than it was. Let's go a little bit more just to top it off here. And checking
the brushes, they don't look particularly bad either. So just clean those up a little bit,
and no need to change them out. While I am in here, I will make sure that this
armature shaft does get oiled. And let's put it back together and see if there's any improvement.
All right, the moment of truth. Oh, much better. Now just for the sake of comparison,
this is the 1940 number 1689W. The first thing you'll notice that's different in
this versus the post-war versions is the whistle chamber is metal instead of plastic. The layout
of the relay versus the motor is a little bit different, but it's the same concept. And this
one, again, I'm going to have to do some rewiring. These are really badly frayed and need to be
replaced. But just to give you a quick triage of what else I'm going to have to do on this one
after I rewire it, is when I activate the relay, just to check to see if the motor is working,
that motor is going to need some serious work. You can tell that this hasn't been lubricated in a
very, very long time. So that's going to be a project for another day. I lubricated this end
of the shaft and the opposite end of the shaft. Haven't done anything as far as cleaning the
brushes, but just that and giving it a couple of minutes to soak in. When I jump the relay,
one genuine 86-year-old whistle
ready for service.
I'm impressed. And so, if you've never had a Lionel whistle tender, or if you have one and
you've been afraid to tinker with it, I hope this has inspired you and given you the confidence
to understand how they work, how to maintain them, and what to look for if, for some reason,
yours does not work. So, fire up those whistles, keep the trains running,
and we'll catch you next time with more toy train tips and tricks. Lionel Express, all aboard!