Dry Rot Deck Repairs/How to Remove Dry Rot Made Easy/DIY for Beginners

VideoJoeKnows
61 followers
@VideoJoeKnows
#howtoremovedryrot
#howtoremovewoodrot
#removingdryrot
#removingwoodrot
#dryrotremoval
#woodrotremoval
#woodrot
#dryrot
#dryrotdeck
#woodrotdeck
Dry rot deck repairs/how to remove dry rot for dummies/DIY for beginners is what this DIY howto video is about. VideoJoe is working on removing some dry rot from the deck area & it's a little slow going for sure. It's important to identify all of the dry rot areas so you can then make the intelligent decisions on how to remove the dry rot to get things ready for installing all of the new building materials. Watch & learn as VideoJoeShows you what VideoJoeKnows...dry rot deck repairs/how to remove dry rot for dummies/DIY for beginners. Nice!
https://www.youtube.com/user/VideoJoeKnows
AI Generated·May contain errors
on this one I just cut it here I took my nail puller and I started splitting it
off and stuff until I got it down to here and I think I got a little crescent
wrench I guess I can get it off yeah that way it won't pop the stucco out
this one over here kind of pulled that out a little bit and I actually have a
couple more and they're sticking out just barely this one here it's only
sticking out a quarter of an inch yeah I thought maybe I could I could do it
wants to go nope I can put it on like that use my screwdriver as a ratchet
see oh so that's not gonna work I had some vise grips I could probably grab it
and untwist it a couple times take it out with this huh or I could dig out I
can do it yeah this ladder moved over a little bit so I can just twizzle this
off oh you know a few tools I try to make do with what I have with what I
have and generally I find a way one way or another I'll get it get it out
three inches long that's it shame on them no this is taking up all of the
weight of the joists that are coming across the floor all of the tiles if
that lets loose this could sag down break the stucco out whatever so it's
always good idea if you're gonna use lag bolts get the right length and what I
usually do is however big I get I'll usually get a washer for it and then I
measure how big that washer is take a paddle bit figure out where I want to
drill it drill a hole through there take a paddle bit and sink it in so it's the
depth of the washer and the head okay then I can take a ratchet ratchet ratchet
ratchet ratchet and this will sink right in flush with the wood but in this case
as long you know I put the next piece up if I didn't do that it's okay if I let
them stick out as long as they're not on the 16s layout so I have to figure out
where this where the floor joists go in relation to how long the plywood is
where I'm going to start the plywood and then after I get it marked then I
can figure out where to where to drill these holes and I don't have to
countersink okay well you just think about different things and you'll get it
okay so I got one more I got one more bolt to take out over here and then the
rest of this I probably just cut it in half it's still nailed with some nails
through into the stucco that they use their nail gun and so I'm still gonna
have to work at it a little bit not too much to get this out okay getting there
I did not cut that with my saws all yet trying to save my blade if I can if I
can't get this off I got the big the big lag bolts out so it's only attached with
a few nails into the stucco we'll see yeah I will say all right I'm afraid if
I if I try to do it too much because it's such a big piece I'm gonna go into
the stucco yeah I don't know I think I should I think I should cut this I'm
gonna cut it in half with my saws all that way I can take it off with two
pieces okay no problem can do that was good I like that sharp blade so I took
the sharp blade I went down oh about halfway and then I came back up once I
got up to here I could just cut it straight in and I could tell when it hit
see this is this is a little short of a 2x6 cut straight up without digging in
first that's why I wish I had some 9 inch blades but I don't I still make it
all the blocks I got down there I've been tapping the nails over you know just don't
forget that it's a it's a very important issue especially if you step on it you
feel like you have to go to the hospital or where you feel like you have to stop
for the rest of the day because your foot is really super sore all that kind
of stuff I just spent a couple extra minutes making sure I have a safe
environment to work in a safe job site
I didn't see it I didn't see any more bolts in here this bolt out so it's
really nailed in there good that probably plastered it with nails some of
these blocks just that short block might have six nails of it let's try
this oh there's a nail right here that's how you work a nail puller if you can't
get it out just hit it with the hammer right here I've got almost all the way
up take your hammer you can pull it this way or you can take it sideways bend it
sideways a lot easier there's another nail here so I might as well dig these
two out and then try to get this out and see I could go along there look at all
for all the nails and do it that way
I'm playing against plywood up here not the stucco I don't want to go down below
if I do push in I could just go right through the stucco not that I would have
to patch the stucco mind you but you don't have to do all that I'm up above
the stucco so I can pry on that if you can't get them out just use your use your
pliers and bend it back and forth and it will snap off then you can tap in the
excess whoo well I'm getting there I'm getting there
