okay i made a decision here i'm taking this 2x6 out here and this bottom plate of the two plates
is pretty much dry rotted at least to this point from here that way so i need to get that out
which means i've got to remove this 2x6 as well so after i remove this 2x6 i'll mark it
and then i'll take this section of osb plywood out because it looks pretty suspect back in there
once i get this piece out i can cut this osb out it's good on the sides but not on the inside
and then i can get up in there and kind of mickey mouse around trying to
get the osb at least up to the bottom of the stucco so that's what my next project is i've
got this all you see over here i got this all cleaned up took that out i've been dug
dug this out so when i put the new piece in i can put a new piece osb and kind of
smooch it in there and come on out this is going to be like a real jigsaw puzzle putting it all
back together huh good grief so i pulled the nails on this 2x6 the surface nailed here
i use my my cat's paw and i don't think i'm going to be able to get this out i'm probably
going to have to cut this with the sawzall maybe across this way so i can jerk this part out now
i can lift this up or something but uh i haven't really tried it let's just see what happens here
i find when i make noise it helps me
let's see let's see what's happening up here boy i got to be careful not to
get that thing to move it seemed like it was moving a little bit
i don't want to pry on it too much i may have to i was hoping to get it without
having to get my sawzall out you know come on
it wants to come but i don't think i'll be able to get it i don't really want to pry too much
on that because i'll crack the stucco on the outside maybe i can get it off the bottom
maybe i can pull it out at the bottom i got a little bit more prying ability at the bottom here
i just don't think it's going to go i don't want to pry too much i'm trying not to
crack the stucco on the other side else then i'll have another issue to fix that you know
see that's why i had to get this out of here
just don't think i can get it let's see if i can split it with my nail puller
look at that look at that look at the back side of that that's why i had to get it out of there
even though the front looked pretty solid except that little edge
look at that it's all eaten up on the bottom you see there it's kind of amazing what
what dry rot will do yes indeed now i can get it see it's all attached with staples and stuff
i guess this crowbar is working good for that yeah see all that junk in there
that's some mold stuff all that white junk and look at that i can i can poke that all the way in
there's a two by six on the other side of this i'm poked right into the until the two by six
look at that i'm poking to the edge on the inside of the two by six let's see now
i can take all that out and get rid of all that stuff and that bottom plate this bottom plate
here see i'm pushing it up i'm pushing the ice pick my scratch all the way up to the bottom of
the top plate and see i checked it right in here see i can push it right up in there but over here
it's pretty tight so if i take this out then i can cut the two by six from here over with the
sawzall i'll have to do that one with the sawzall probably and then i can mark this two by six
with my pencil like i did that other one okay and that'll give me a straight edge
you gotta get some construction pencils they don't cost very much you know i'm even going to
mark the the bottom okay so this one is pretty solid and i'm thinking that i might be able to
use a portion of this for blocks or something although granted this two by six right here
is 17 years old so if i if i cut that and save it for blocks or something like that it's going
to be really hard to nail into and up at the top of it it looks see there's some coloring on it but
it looks pretty good i could almost i took it off in one piece i could almost put it back
in the same place but i i'm not going to else i'll take that out and if i ever want to reuse it i may
have to pre-drill holes in it or something okay so i guess i can i guess i can get that out too
because all in all i'm going to have to i'm going to take this two by six out take this section
of osb off and that's on the back side is the stucco so i'm going to have to be real careful
with that as i pull it out i think it's going to come out fairly good though because it looks
to have quite a bit of dry rod in it well some of it it almost looks like it's surface
surface dry rod and it doesn't go in there very far but the whole thing's discolored it's really
not too great you can see on the inside corner here it's pulled apart and stuck
so i'll take that out i'm going to take this little section out take this out
just catch my breath here now this is tricky to do this without ripping everything else down
but this is what you have to do sometimes when you run into water damage well that's all i have
for this time but i'll be back with more videos