Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech.
Welcome back everybody. Today we're talking about this little pistol right here. This is the Taurus
TX-22. Right now it comes in a number of different colors, different models in terms of safety,
non-safety, state compliant, all of those sorts of things. But back when I picked this one up,
this was actually the only model that they had, which has a thumb safety back here and then
two 16 round mags is what it comes with. So like I said, I've had it for a while as I just
intimated there. Now, why are you only seeing the video today? The reason is
back when these first came out and a bunch of folks got them in for review, myself being one
of them, everyone out there on the internet, all the channels were saying, you know, their
guns were performing awesome. They had good reliability, good accuracy, all of those sorts
of things. Well, I went to the range and every single time I would have malfunction after
malfunction after malfunction. So I just kept, basically I would just switch ammo each time I
went to the range because as many of you know, 22s can be finicky little beasts in terms of
ammunition. And bottom line is I couldn't find anything that would run right. And so I sent the
gun back for repair to Taurus and it took a while to get it back. But when I got it back, this is
what we got in and this gun actually runs. So we're going to talk about this particular gun and
all the little features of it. And then at the end, kind of wrap it up with what I think of it
overall. Before we take a closer look here at the pistol, I wanted to thank today's sponsor. And
is Acre Gold. I would imagine most folks right now in this time of, you know, economic uncertainty
in a country with a fiat currency, there's a lot of folks that are, you know, somewhat concerned
about that Acre Gold, of course, they are sellers of gold. And one thing they do that's a little bit
different than most companies that they offer basically, sort of like a payment plan, if you
will, where you can just commit to putting whatever, just hypothetical, pulling a number off
my head, $50 in a month, and then set the amount of gold that you'd like to receive. So whenever
your monthly installments get to that amount, like say like an ounce or whatever, then they'll ship
that ounce out to you. They may have, of course, smaller amounts as well, larger amounts, all those
sorts of things. But basically it offers you a way to just kind of put a little bit of money aside
and then get some, something of actual value again, rather than the fiat dollar. Anyway, let's
get on with the video. Getting into the features, we'll start down here at the mag and sort of work
our way up and kind of walk through them. I've already mentioned it, but it does have two 16 round
mags that come with it. Again, they do have band state models at this point in time, if you guys
live behind enemy lines. Like many 22 mags, though, it does have this ability to sort of pull it down
to aid in loading for, you know, younger shooters or older shooters who may have some sort of
disability or something like that. That said, I did not find it difficult at all to load them
to full capacity. Never, never have. So no issues there. One thing that's kind of cool about this
is that it actually has a little cutout on there, kind of like a quote-unquote
fighting pistol would have. In case you have a double feed, you actually need to rip and strip
that magazine. So kind of good feature there overall. The grip in terms of just ergonomics
is fantastic. If you guys like the way HK VP9 or Walther PPQ or any of those types of pistols
feel in your hand, you're going to really like this one. It points very naturally,
fills your hand well. I mean, ergonomics is on point. Honestly, the texturing of it
is better than some, you know, quote-unquote fighting pistols out there, in my opinion.
It's not too aggressive. It's not going to be abrasive, but it also has some good texture there
where it's going to lock it in your hand and it's not going to slip even on a hot day like today
where your hands are a little bit sweaty. Again, like I mentioned, it does have an external safety
there. It is ambidextrous on that. Our mag release there is small, which I personally tend to like,
and it is shrouded here by the frame as well. So you're not going to accidentally bump it.
You guys can see there, it's not sticking out at all and it is reversible. It's not ambidextrous,
but if you want to reverse it, you can. And of course, as you guys can see here,
the mags are cut for ambi use from the factory. Now, continuing on forward, we do have our slide
lock and slide release lever here. No issues running it. That is not ambidextrous. So lefties,
you're just going to have to roll with it. Trigger on this gun is actually somewhat unique. So it
looks like it doesn't have a trigger safety. However, the entire trigger body that you can see
here is the trigger safety. So there's a pin going through it and the actual trigger, I'm not sure if
the camera will pick it up if I can bring it in there, but the actual trigger itself is behind
what you guys are looking at there. I don't know if you guys can see it or not, but regardless,
trust me, there is an actual trigger behind there. So what you have to do is this motion right there,
that's your trigger safety, like the dingus, what would be on a Glock, for example,
and trigger press on the gun. It's pretty good. Bring it up. There's a slight wall when it
actually engages the trigger right there and it breaks right at five pounds short. It's got a
good reset. No issues there. It does not have double strike capability if you're a Taurus fan
and you're used to that. So just know that going forward. We do have our takedown lever, which we'll
get to here in just a second. Relatively large trigger guard if you guys want to shoot it in
the winter, those sorts of things. And we have a true 1913 rail up front. So not mad about that.
Continuing on to our slide, it's made out of 7075 forged aluminum. It does have good serrations at
the front and the rear. As you guys can see, if you want to press check it, those sorts of things.
It also has a little bit of a scalloping there on the top so that, you know, it's a little bit
more slimmer. It's a little bit more lightweight. The pistol itself weighs in right at 17 ounces
with an empty mag on my scale. So definitely not a heavy pistol at all. Our sights here on the rear
are just two dot and then single dot up front. The rear sight is fully adjustable so you can,
you know, adjust your windage, your elevation, those sorts of things. That said, mine shoots
dead on with any supersonic ammunition that we put through it. That said, most of the supersonic
ammunition that we put through it will still be subsonic because the barrel itself is only
four inches long. And there's some cool stuff going on with the barrel. So let's disassemble
it and kind of walk through that. For disassembly, like any other gun, you're going to want to make
sure that it is clear. And we are, at this point, you're going to point in the same direction.
We're going to pull the trigger, pull back slightly, pull down on these two tabs underneath.
And right there, you don't have to slide it fully off. You just push it forward a little bit
and your slide will come off your grip. You guys can see there's a whole lot of aluminum and a
little bit of steel reinforcement on there. So not just a polymer gun, it's got some reinforcements
all the way around. Moving on to the slide, we have our recoil spring assembly here that pops
out. It is one piece. It is polymer, as you guys can see. And then our barrel. You guys can see
there. I cannot get it out because I happen to have a Bowers Group ID suppressor attached on
the end. But what's cool about the barrel is that it actually comes from the factory pre-threaded
for an adapter. So as it comes, you're just going to basically have your barrel and it'll have this
little sleeve around it that goes right up to here and basically has little wrench flats on it.
You can just remove it and then put this half by 28 thread adapter on there. And as you guys can
see, it has wrench flats as well, which is always good whenever you're dealing with suppressors.
And basically it comes with it. So basically you can put it on right when you take it out of the
box and your gun is suppressor ready. At this point, I'm starting to think this may be a relatively
short video because I really don't have a ton more to say outside of the reliability and price
point issues. So reliability with this particular gun has been 100%. It's got over 800 rounds
through it, all of them suppressed with Agula, Federal, CCI, subs, supers, etc. Now the subs are
the ones that are designed to run in semi-automatics from Federal, but it's ran everything
from 32 grain up to 60 grains and again has had a grand total of zero issues of any kind. So can't
really be mad about that. Some thoughts on it. I guess one thing I really do wish that I got the
model without the thumb safety nut, but it's a big deal on .2. I just don't like safeties on guns,
but again, they offer that model now. And price point on these guys, MSRP comes in right around
$349 depending on the model. So street price in a normal time, you could expect to see less than
that. Right now though, because we're in the middle of a pandemic, good luck finding these
things in stock. Like I said, there's a lot of reviews out there and I think I'm the only one
that ever had a lemon, if you will. So basically everything's pretty positive about it. It's got
a good trigger. It's great ergonomics. The ones that are reliable like this one are reliable
and every other one I've seen reviewed to date has apparently been reliable except for my first one.
So good reviews, good pricing, good ergonomics. And like I said, they're going to be relatively
tough to find them in stock right now. However, there will be a link down below,
pinned in the comment section or in the video description where you can pick these up when
they are in stock. They might be in stock as of this video. I don't know. We shall see. Anyway,
but that's pretty much it. If you guys have any questions about the pistol, anything like that,
you can always post those down below in the comment section. However, the best place to reach
me is still over at my Facebook page. Facebook's censoring me a lot, so you may not see a ton of
my posts. But as far as I know, I'm still getting all of the messages over there and I do get back
to everyone because I do see those messages. Whereas other places like YouTube and elsewhere
that I post content, I don't always see the messages or comments. So that's pretty much it.
Thanks for watching. Thanks for subscribing. If you're not subscribed, please go ahead and hit
that subscribe button. And I look forward to seeing everybody in the next video.