@VideoJoeKnows Man says he can't adjust storage cabinet doors then does it anyway is what this DIY howto video is about. VideoJoe is looking at some storage cabinets & the doors aren't lining up & the storage doors are also rubbing & VideoJoe can't have that. He sees that the storage cabinet doors have concealed cabinet door hinges on all of the doors so he happens to think with a bit of convincing, he should & will be able to get these storage cabinet doors adjusted at least good enough where they shouldn't rub & look more pleasing to the eye when walking past them. Do you think VideoJoe can adjust these storage cabinet doors? I for one happen to think the answer to that question is yes! Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't adjust storage cabinet doors then does it anyway. Nice! https://www.youtube.com/user/VideoJoeKnows
Hey, I'm back making some more videos and I've got some doors here. See this here?
How this door is rubbing and when it closes, look how much higher it is from this one here.
And I look at the bottom, I look at the bottom doors and it's rubbing. See that? I'm not making
this up. It's rubbing. And it looks at first glance, it's like, okay, how on earth are these
going to be able to be adjusted? Well, if you're, if yours are like this, you're in luck. Okay. See
this type of hinge. This is, this is a called a concealed hinge. There's different screws on here.
This is an adjustment screw there. And you've got some other screws up in here that you could
adjust this hinge up or down. Okay. Cause when I look at this, you see that so much higher this
door is from this side. So possibly that means that this side has to be lowered or this side
has to be raised. We can't really lower this door here very much. I mean a little bit, see this gap
here. Okay. We could lower this down a little bit. Look at this one over here. There's no gap at all,
right? Just barely right there. And we see that this left-hand door needs to be raised and,
and maybe we can raise this one up a little bit. Maybe we can take this one and lower it down a
little bit. Cause we know this right one, we can lower it down a little bit and this one's down
all the way. Maybe we can raise that one up. So probably the first thing I'm going to do,
I'm going to take my handy dandy Phillips screwdriver.
Okay. And I'm, all I got is the Phillips screwdriver. Okay. That's probably all I'm
going to need here. And I'm hoping to be able to undo those screws and might have to get a different
Phillips tip and these screws, mind you, see whenever, whenever you do something like this,
here's another thing. I mean, look at these hinges. They're kind of rusty.
See this, this cabinet could be 20 years old. And once you start working with stuff like this,
maybe you're going to have to spend a little bit of extra time because it doesn't seem like I can,
I can undo anything on that. Now that could be the base. There's an extra screw right
there. And I'm going to undo this one off this side and I might be able to raise this. I'm just
going to see what happens first off. Can I raise that? Yeah. See there. I think I, I think I raised
it just a little bit just by doing that. Yeah. Okay. Now some don't have that, that screw right
there on the far right. Sometimes it's just these two mounting screws here. And then there's a slot
on there. You can raise this up or down. Okay. I think I raised that a little bit. Let's let's see
here. Okay. Now the gap, you see this here, right here. It's still this side, still up a little bit,
but it's not as high up as it used to be because I just took that door and raised it. Okay. So
here's the thought over here, this side, we're going to have to lower it, right? Okay.
Well, let's see what I can do here. Hopefully I can get this lowered just a bit.
This has the same screw set up. And if I can't lower it, it might be
because this whole frame is cattywampus. Cattywampus. Have you ever heard that
word? It means it's not plumb. It's not square. I might have to get it. Oh, there,
that one went down a little bit. I might have to get a hammer and tap on it a little bit, but
that one went down a little. Okay. So now I'm going to tighten that screw.
Cattywampus. Look that one up in the dictionary and tell me if you could see it in the
Wikipedia, whatever. Okay. Now let's just look at this again, shall we?
Look at this. See that? Let's get you in there. It's about the right height, isn't it?
You know, if this was closed, see, it's lined right up. That's the first thing I'm going to
check. Now, now I've got to start playing with these adjustments. And I, and I know
this door has to go, has to go to the right. Don't I? Let's get you back out like that.
This door would have to go to the right a little bit, and that's going to actually raise this up.
But I may have to still work with those adjustments because once I get this all
perfectly set, I may have to raise this door up just a hair, this one up a little bit, whatever.
Okay. The next thing I have to do is I'm going to take this set screw over here.
You learning anything yet? I hope you are. Okay. There's another set screw.
Let's, let's zoom you in here so you can see this screw. Okay. See the screw right there.
I can unscrew that in or out. Okay. Let's, let's get you set up right here.
Let's see what happens, which means I want to push this edge that way. Okay. I want to unscrew
this. I'm going to either tighten it or, or unscrew it. Now see, as I'm going that way,
I can see that this is coming towards me. That would make it worse. Okay. So I'm going to,
I have to unscrew it all the way and it is unscrewed all the way that way, as far as it can
go. Okay. So that's my first step. Now I know that the bottom hinge can be messed with too,
but the first thing I'm going to do is first close the door. Okay. It's still about the same
as where it was before, which then tells me that I'm hoping that this door can go that direction.
Okay. So I'm going to take this and I've got the same little set screw here
and I'm hoping that when I tighten that, man, it's loose almost all the way as it is.
Look at that. See there, look at all that flop like that. And it looks, it looks like
maybe it's not snapped in properly. Oh no. This bottom one looks, looks a lot better.
I'm going to have to look at that because see, as I can push, I can see that I can push the
whole hinge over without making any adjustments. So I may have to tweak that a little bit
in a different direction. Now I look at the door and I got a bigger gap at the bottom,
so I can pull the door that way to the right and that'll lift the top up. I can take the
adjustment screw there. I'm tightening it up and it's pulling the door this direction.
Okay. And that's helping to lift that up. And I see that I'm going to have to mess,
I'm going to have to mess with that. I'm going to end up having to do some extra work with this.
See how springy that is? It's not supposed to be like that. Look, look at the, look at the,
you seeing that? See how much I can push the door over? If I could keep the door over that far,
that's raising this up. If I had that right like that, this door would close without even hitting.
If I kept pressure up like that, see? Almost. But see how much slop it has in it? It's got
way too much slop. You're not supposed to have that after you get these adjusted. Look at this
bottom hinge. Got the bottom hinge, there's no slop on it at all. That tells me I'm thinking
this isn't snapped in properly. And so I'm going to end up taking, I'm going to undo this
hinge all the way. And some of these come off different than others. There's another screw
there. I'm going to have to take that off. I'm going to have to mess with that. That's what it
looks like I am going to have to do in order to try to make this fixable. No matter what you do
on there, all of your hinges are like that. You can play with this for a half hour or so if you
want. Usually I can get these adjusted. If everything's set up properly, I can, I can get
something like this adjusted in maybe five minutes or less. I'm going to have to work on this one a
little bit more, aren't I? Because this is an old cabinet, the floor could have settled. It could
have thrown this side of the cabinet, the right hand side of the cabinet down, the left hand side
of the cabinet down. It could do anything to where after I make all the adjustments, maybe I can't get
it perfect. Okay, that's another, that's something else I may have to look at. Okay, but while I'm
thinking about that, I'm just going to look at this bottom one and see if I can't do something
with this one here. Okay, I pushed that, I pushed that as far back that way and now I'm going to
tighten that and that pulls this side out a little bit. Now I can, now I can try doing the same thing
with this hinge, this right hand hinge. Same type of deal. Okay, looking at that.
Here, let's move the camera so I can get the door closed after I get done.
Look at this again. Looks like this side needs to go that way. Okay, I'm going to take that one,
one screw and I had it adjusted just barely. Okay, see it's hardly, it's hardly hitting
at all right there and now to get this over further, I can pull, I've got a gap here. I can pull
the right hand side, push that this way. That's going to raise this up a little bit more. That's
going to make the gap bigger there and it's going to make it smaller there. So, I'm going to take
this towards me. I'm tightening, tightening it and that hinge is actually pulling over to the left
and see it's almost perfect but now I may have to take this all the way over or take this
bolt up all the way that way. I've got it like there's no gap in here at all.
See, I almost have, I almost have that but your hinges, there's only so much room you have. You
know what I mean? This one's, that one's adjusted. This door here is adjusted all the way that way.
I can't get it any further. Okay, let's look at this a little bit more. See,
see I've got this adjusted out all the way and it's hitting, it's hitting the edge. I can't,
I can't get this door over any further. Actually, it goes a little bit and if these hinges are old,
it might have a little bit of a slop in where the hinge bit is right in here on the concealed part
and if you get another one of these that's perfect, brand new, that fits this exact location,
it might adjust better than this old one because it's not worn out.
Okay, you see there I got that, I got the bottom taken care of.
Kaboom! I don't have much gap in here, do I? But I've got just enough and the doors are lined up
pretty good. But see, if this hinge over here was, didn't have any slop in it, I could push it
up further and that's perfect. But it's, it's folded down a little bit because this is an old
hinge. It's probably 20 years old. I'm guessing that hinge is 20 years old. It's all rusty
and it's just wearing right in there and right there. See that? I mean, it's a little loose,
so I might have to take the, if I really want to spend extra time on it, I can take those screws
out, try to tighten it up more and get that pushed over because you see how, how it's flexing right
there a little bit? All it needs is that much flex and then this door has plenty of gap. Okay,
if that's plenty of gap, then yeah, get this back out here. But for, but for the time being,
I got those two doors way better than they were before. Okay, obviously these top ones,
I'm going to have, I'm going to have more work, but basically, basically that top is going to
work the same way because see how much, see how much flex there is there? Look at that.
If it was up like that, then obviously I would have to then adjust the rest of the door
right here. I have to go back that way. That would give me plenty of gap there. And if I pull,
if I pull that door where it's supposed to be, and then if I readjust that,
I would have plenty of room. See, that's because this hinge on the left is a bad hinge.
Yeah. Okay. I hope you get the idea on how these adjustable concealed door hinges work.
That's all I got for this time, but I'll be back with more videos.