Uukha Xpro3 25 Carbon Recurve Riser

The Precision of Crossbowry
1 follower
7 Video Views·Feb 18, 2026
Uukha Xpro3 25 Carbon Recurve Riser
Comments are disabled for this video.
Hi, this is Dan with Lancaster Archery Supply.
Today we're going to view the X-Pro 3 25 inch riser
from Yuca Archery.
This is a 25 inch carbon riser.
Comes in a matte black finish
offered in right and left hand.
With it being a carbon riser,
you're going to notice first it's very lightweight.
It's 2.48 pounds.
So comparison to most risers,
it's going to be very lightweight.
With that, it's going to allow you to set up the bow.
If you're looking for a lighter weight riser,
it's going to give you that ability,
but you also have the ability to add weight to the riser
with obviously your stabilizer bushings
so you can distribute the weight through the bow
where you like the feel.
Looking at the center here,
you have your standard stabilizer bushing 516-24,
along with accessory bushings
on the top and bottom limb pocket of the riser
that are 516-24 as well.
Looking at the riser,
it's an ILF riser like most,
and you're going to have your lateral limb just pockets here.
Very simple adjustments for this.
There's a set screw internally here that'll be removed
that allows you to move your pivot pockets
for your lateral limb adjustment.
You also have a standard limb bolt here.
One thing with the limb bolt,
you can take this out from the max position out seven turns,
but you have a normal limb bolt
that's going to adjust your tiller,
your weight poundage as well.
And then if you go to the center of the riser here,
you notice the grip is a little bit wider than most grips.
I would say it's a medium height grip,
but it is fairly wide.
So you get good traction placing this in your hand
at a medium height grip and also a textured grip as well.
So you get good traction on the grip as well.
If you're going to the shelf side here,
we're going to have normal clicker bushing here,
a 632A clicker bushing,
along with a removable clicker plate.
Clicker plate simply just is inserted into a receiver
and goes into place, locks in place from there,
really can't come loose.
You also have your 516s rest and plunger holes
and normal sight bushings on the riser.
Overall, first thing you're going to notice
with this riser being carbon, it's very lightweight,
but with that, there are some advantages.
You're going to be able to set up a fairly light
overall mass weight bow setup.
Also, the riser does offer a fairly fast recovery time.
There's minimal vibration
with the carbon structure of the bow.
And also, it does handle, regardless of weight of the limbs
you have paired with this riser,
as you're drawing a limb,
it's going to support that weight very well,
give you a nice smooth feel out of your setup
with a good recovery time.
So overall, whether you're an Olympic style archer,
barebow archer, and focusing on having high performing setup
or even having a very lightweight setup
where you're still going to have a smooth feel,
this would be a great fit for that riser.
If you like this video, please give us a thumbs up.
See more, please subscribe to our YouTube channel
and please be sure to hit the notification bell
for upcoming videos from Lancaster Archery.
And if you have any additional questions,
please visit LancasterArchery.com.
