How to- Captain America Shield Tutorial - DIY The Falcon and The Winter Soldier

Shielded Dynasty Network
2 followers
3 Video Views·Feb 15, 2026
Hey, welcome back. Hope you're having a great day.
If you're new to the channel, you just stop by and you're like,
who's this guy? Why does he look like a random GTA 5 character?
Well, my name is Stealth, and I run the Heroes Workshop channel.
And I make cosplay things, mostly out of EVA foam.
And today, I'll be making a Captain America shield
from the Falcon and the Winter Soldier series.
I love that design. I love the little details they added.
Looks really nice. So, last week, I wasn't feeling too well,
and I only had a day to make this, and I crammed it all in.
And, yeah, it's a bit of a rush job, but it turned out okay.
Just remember to take your time, and I'm pretty sure
your shield will turn out better than mine. I guarantee.
So if you want to build your own Captain America shield,
the foam peppercor file template is free. You can get it below.
Download the template. You can follow along the video,
and build one yourself. And as always, if you're new
to peppercor foam building and cosplay in general,
and you want to get started, this is a great way to get into the hobby.
I have an in-depth video on my channel, and learn all the techniques.
You can build a sample project, and then you can apply
all those techniques you learned on a sample project
on any foam peppercor file you come across, and it should be no problem.
I did the helmet a few weeks ago,
and then I was like, man, I wonder if I should do the shield.
So I asked you guys in a community post
in my feed, and did like a poll, if I should do the shield.
And a lot of you guys wanted the shield. So I was like, sure, why not?
So here we are. So yeah, I did the Captain America helmet build.
You can check out the video. A card will pop up
in the top right, and that will take you to the video.
You can get the template for that as well. So you can build the shield,
and you can also build the helmet to go along with it.
Just don't throw the shield, man. Don't throw the shield after you're done.
You're going to ruin it, I guarantee. I know, I'm looking at you.
You're like, how does he know? I feel like I'm being attacked.
I just want to let you know, if you throw that shield,
you're going to ruin that shield, because it's just a prop, man.
It's not a real shield. Captain America isn't real.
Don't do it. Don't. Anyways, here's the video.
See you later.
So, when you print, remember to
print with the texture, because
it's going to leave a border here.
And if you don't have the texture on, you won't know where
the shield actually ends, because you're going to have to cut that line
right there, because that line is going to connect to the other part.
So I already cut the border off the second page,
and you can see, once you tape it together, it'll line up perfectly.
So we're creating half the shield, and then when we're
done tracing it, we flip it, and so on with the other pieces.
These pieces here will be to
separate your colors. So we have
the silver and the red, and this is the outer
stripe. So go in this order.
And you use these to trace the stripe around the shield, once the base shield
is traced out. This will all make sense when I'm actually doing this.
Okay, so all the template pieces
have been cut out. Now what you're going to do is you're just going to
simply tape all the sections together.
Remember to print this at a high quality,
because otherwise you're not going to be able to see there's
edge ID numbers, so you can line everything up.
And then once you figure out what connects to what, just take
some packing tape, and just basically tape
them all together, and then you'll have your templates to apply
onto the foam. This is half the shield,
but remember, there's going to be a seam.
That seam is important, because that's what's going to give you the curve.
We're not going to make a perfect circle and then try to
heat shape it. Okay, so try to get as far away
to the edge as possible, because we need a lot of space to flip this.
You're going to want to trace
this line first, in case it shifts.
But you can just put things,
heavy things. I usually don't put anything, but
this is pretty big. That's what she said.
You're probably going to want to make the detail
lines now. So now you can either
cut this apart, or you can use the parts for the template
that I included. So they're going to be a little bit odd.
You can use these. It's just an option. So you'll just have
to trace and then flip.
Kind of right to the edge. It works too.
I'm just going to use these. Like I said, you can
also cut these apart, and you'll have a perfect
arc for every row of every stripe.
Ignore this second line.
I was using this.
Don't use this line here.
But you can use this for something else. I'm doing the
Falcon and Winter Soldier shield.
So you're going to want to measure this strip in half
3 centimeters. So just make dots.
These are just basically cutting guides.
So when you cut, you're not going to
be off. So just do 3 centimeters
in the middle of this strip.
So now that I have a basic guide, I can cut it.
If you look at the Falcon and Winter Soldier shield,
it has a new detail line on it
versus the old Captain America shield. It has this
other detail line right here and these little segment
things. But we'll do those segments after once we know where the star is going to be.
It's time to cut this shield
out of this foam and free it.
Okay, so you want to cut this shield out
but I kind of want to put a bevel, an inside bevel
because I don't want just like a block. I don't want to see this block
when I'm holding the shield. I want to make it look like thin metal.
So if you bevel it when you cut it out, you kind of will give it an illusion.
Remember to get a fresh blade for this because
you're going to dull it immediately by doing this whole thing.
I'm not even sure if this is going to look good.
My brain tells me. Do it!
Comment down below who that is.
See? Right there. Boom!
It's already curved. Okay? And you already have that nice bevel there.
So take the star template.
There's a star.
Now we're going to do the curved line. Go from point to point.
Okay, so you just want to cut off this edge.
So I would use
probably a finer point for precision
because trust me, you can get pretty narrow
with this hobby knife.
Star has an inner detail as well.
So we're going to do that. I'm just doing it freehand.
You guys can be neat and use a ruler.
Okay, so that's the shape you're going to want. So use this one
because you still need to line it up with this.
Otherwise, if you use this one, you don't really know where the center is.
So we're just constantly using the templates to create other templates.
Pretty neat that way.
I combined Steve Rogers and Falcons star
so Falcons doesn't have these lines in it.
I just did that myself.
It only has this inner detail.
I just wanted to add my own creative touch to my own shield.
But if you want to make it accurate to the show, don't add these.
Okay, so now what you want to do is score these lines.
We'll do the rest of the shield after.
So just take a blade.
Just score the lines. Don't cut all the way through.
So what you need to do next is you need to use a heat gun.
Go over the lines. Always move the heat gun
so you don't burn the foam. And then that will open up the lines
and make the details stand out a lot more.
You can see that the lines really popped. Look at that. Wow.
Okay, so now that the foam is still warm, just put over something rounded
and just kind of give it a little bit of a curve
just so it doesn't look flat once you glue it
to the center of the shield.
So I'm just kind of going on the edges here
and the center here. Don't make it too much. Don't make it a bowl.
Don't make it a bowl. Please.
Just a little bit. Okay.
See? It has a little bit of a curve so it's ready to
glue into the base section of the shield.
Okay, so now we did the star. We'll do the same thing.
Score the line of the shield
for the details.
So first we're going to glue this star
into the center. What you want to do is as a reference point
use this point to this
here. Okay, we're just going to use
contact cement as usual.
So I'm using my rotary tool, sanding bit
and just kind of go over it and level it out
and clean up all the roughness.
Then after that we'll just go over with a heat gun, heat seal it
and reduce some of the roughness that we can.
Okay, so there's a detail on the shield
that goes along this strip here.
On every point you go to that line and you just kind of
make a rectangle I guess. You can measure
measure a straight line and then, yeah.
Just make like a rectangle. Okay.
Just try to find the center point.
So just do that to all the points and then
use your knife to score it, use a heat gun
open up the lines. There's your little detail.
Okay, so it's time to seal this giant thing
before we can paint it because
if you don't seal it, the paint will just soak in
and look very flat. I always use
bounce. It's like a PVA glue
but it has a foam rubberizer additive so it works really well with foam.
The other things you can use, this is easier to find
tacky glue. I just put one coat of this
as well as the bounce. I don't mix this with water.
And classic
Mod Podge. You can use this on your foam
stuff too. So I'm going to apply one coat with a foam brush.
I'm going to do this side first and once it's dry, then I'll flip it
and do the other side.
The Captain America shield from the Falcon and the Winter Soldier.
Build one yourself. This is Stealth from Heroes
Workshop and I'll see you guys next week with another build.
And hit like. Don't forget.
So or else I'll go broke and I can't make videos.
I'm not kidding. Okay, bye.
