Home Trends AC 522 NO52AB6LKIC Ceiling Fan

TV Electric Fan
2 followers
12 Video Views·Feb 14, 2026
A Home Trends branded 52" ceiling fan model AC-522(NO52AB6LKIC) from 1993. The unit was made by Litex and is identical to the Harbor Breeze branded New Orleans. It is designed to be a replica of the Casablanca Victorian ceiling fan.
AI Generated·May contain errors
Hello viewers, here is a Home Trends branded 52 inch C1 fan from 1993.
Here's a look at the informations tag and I just look at the model number for the first time and
that is completely ridiculous. AC-553NO52AB6LK1C quote CC close quote.
And the motor itself is rated for 73 watts or 0.8 amps and we'll just have to go with that
because I don't have a means of measuring the power consumption at this particular install.
And while we're up here, here's a look at the top of the motor and the canopy.
Before we get into the video I want to address something that's going to
I'm sure come up in the comments box. I've been doing this long enough. I know how it goes.
We're going to get people to come in and say wrong. It's a Lowe's. It's a Harbor Breeze.
Nope. This was sold. This particular one was sold at Walmart under Walmart's store brand
Home Trends. I have the original box. You can go back to look at the install video where
I show the box and you can see it's a Walmart product. Now that having been said, the same thing
was also sold at Lowe's. There was a model sold under the Lowe's store brand Harbor Breeze
and I believe the model name was called the New Orleans. And it's the same thing but this
particular one is Home Trends. The OEM of this is Litex and I found it very interesting that
Lowe's and Walmart would share something of the same OEM because I really would have expected
Lowe's, although it too is a big box store, I would have expected it to sell something of a higher
caliber of quality than what you would get at Walmart which is like a bottom of the barrel
cheap junk store. Now Lowe's is not the best either but I just would have thought it a little better.
Sometimes the models are built a little bit differently depending on what store they're
sold at but I don't think that's the case here. The instruction manual is kind of poorly written
and it happens to reference both Harbor Breeze and Home Trends inside the manual so I really
think that the only difference between the two was probably the pictures on the outside of the box.
It is quite a stunning piece especially for something that would have been sold at Walmart.
This does not scream cheap garbage like a lot of the fans there do.
This was intended to be a Casablanca Victorian copy and interestingly enough it appears to use
the same motor housing cast as the Hampton Bay Saint Clair. It's even got the little flowers
design on the outside. Without looking at the two side by side I think it's pretty much identical
and I don't know Hampton Bay to use latex as an OEM but I don't know maybe they did or maybe
this is just a cheap mold that multiple OEMs share. I really don't know. I'm not particularly
well versed in the OEMs of different ceiling fans and who made what and so forth but I do know that
this was definitely made by latex and it was definitely sold at Walmart under Home Trends.
Anyways it has very very nice blades. I'm going to turn the light on for a minute.
Unfortunately we don't get a good sun in the room here this time of year
so I don't have good natural lighting but we use the fan's light for a moment to illuminate the
blades. These are really really nice. I don't know if they're walnut or cherry blades. I'm
trying to get a picture where there's not a glare and it's pretty much impossible
but they're high gloss blades and they are just absolutely beautiful finish.
It doesn't even have a lot of imperfections or anything to it. It's just a really really nice
finish. All right I'll turn the light back off. I guess I can leave it like that for now.
The the brass finish and it's obviously fake brass but the brass finish is kind of the same
thing. It looks very convincing. There's not a lot of imperfections to it. This thing is over
30 years old and it's not tarnished. It's not discoloring. It really looks pretty nice.
Sorry the video is so shaky. I have to lean over the the tables here so I have to
have to lean over the table and I just can't hold the thing steady.
Canopy is pretty fancy too and again very nice finish.
And you got this really fancy five light. It's really quite a stunning piece in person
and I don't know what this would have cost but I imagine it didn't cost very much
since it was sold at Walmart. Although maybe in 1993 Walmart wasn't as cheap of a store as it
is today. I don't know. I wasn't alive yet. All right let's turn this thing on here.
We're going to begin on the slowest available setting which is low on the wall control and
low on the fin itself. The bearings on this thing are fantastic. As you can see it started
right up and is gaining speed relatively quickly considering how slow a speed it's set to.
This is one of those situations where the unit not only looks exotic but actually works really
well. This is not like the crests where the the crest 8600 where it's you know kind of all
aesthetics and not much to to show for in performance. This is a very good performing fan
and I'm curious to see what the CFM outcome is going to be because sometimes the fans feel
stronger when they're mounted over a table like this because the airflow is kicking out more at
body level versus up at the floor. But I really think that this is this is going to move more
air than the crest. I wouldn't be surprised if this is on the higher end of the 5000 range.
I wanted to show something about the irons too. They're kind of an interesting shape.
The irons, I can't think of other fans where they're designed like this, but they kind of
taper upwards and become more thin towards the end. That doesn't really matter. I just thought
it was an interesting thing I noticed. All right I'll put it back on now. Back in focus.
It's a very heavy fan too. The motor's very heavy. I don't know what size it is but
I guess it must be something halfway decent. The blades are fairly thin but they do have a
decent amount of pitch so I guess that's where it gets its performance from.
I can't get a very nice super slow low out of this either. It just doesn't respond very well
to the control. Sometimes they do, sometimes they don't. It's a matter of the different values of
capacitors that were used. This is, let's see, this is a little faster than what I'd prefer.
We no longer have to guess the rpms. I'll see if we can get a measurement.
I don't know how this is going to work with gloss blades though. I've never tested that before.
Watch it work is better or not at all. That's always an option. This thing doesn't necessarily
stink. It's just it's not being used the way it's intended to be. It's not meant for this type of
use case. It might also just be going too slow for it to count this. I don't know. I don't know
what the range is. That's a bogus reading. It claims it'll be 17 rpm. I don't think so.
I think it's just running too slow for this to really get a good
sample. Yeah, that's picking up exactly the same every... I don't know. That was that was
different reading. That might be more believable. 35. That I believe. So that's about 35 rpm.
I typically like between 20 and 25 for a low speed. I'm not going to write down all the specs
for all these different speeds. I'll just write down the three specs for the factory speeds. That's
really all I would be interested in documenting. Looks very nice here in the kitchen. It's a
good match. I was surprised that this is as old as it is. I thought this was going to be a 2000s
product. Now the stupid white and silver colorless trend certainly did start to take over in the
2000s. But up through, I would say until the late 2000s, early 2010s, you could still buy products
that were not silver or white. There existed this old thing called consumer choice, which was very
nice to have. I'll bump this up to medium on the fan, but low on the wall control. If you look back
in the Home Depot catalogs throughout the 2000s, you'll notice that a lot of the fans that came in
a large quantity of finishes like the Huntington, the Cameron, the Chatham, etc., many of those
were available in highly contrasting styles. You could get them in all white, all black,
brushed nickel, chrome, antique brass, polished brass, white and brass. There was just full-on
consumer choice and it was great. And then that just disappeared in the 2010s. All options became
lost and today, forget it, the ceiling fan market is just totally hideous today. There's nothing
brass or it's hard to even find just a basic white fan anymore. They're all just stupid
silver and black and just ugly, horrible, lifeless, characterless, stupid, bland, dumb,
horrible interior design schemes. And that aside from the fact that they're just,
they're mechanically garbage too. All right, this has picked up a fair bit of speed. Let's see if
we can get another RPM reading. That is 52 RPM. I'll try to keep this on the tripod and it will
be a little bit steadier that way. The image stabilization on this is nothing like the
GOES Pro camera. You can shake that thing and it'll still be a clear picture. It's incredible.
I can already feel some air movement from it. It's nothing super strong, but it's definitely
noticeable, especially if you were sitting at the counter here. Okay, so this is now
high on the fan, low on the wall control. So this is the wall control's factory low speed
and this is way too fast for me for a low. It's a very smooth breeze that this puts out.
You can definitely feel a respectable amount of air coming down now.
I don't think that we're going to be able to get a CFM reading. Yeah, this is not sensitive enough.
I wonder if I can get one of these that's more sensitive. That is 61 RPM. Yeah, I would definitely
put this in the average to above average category in terms of performance, at least here on low.
So now we'll go back down to low on the fan and we'll go up to medium on the
wall control. It's kind of interesting to see the RPM differences and how low compares to high on
the control and whatever, because I always wondered like there's nine permutations, but
is, you know, let's say medium on the control, but low on the fan, the same as low on the control
and high on the fan or, you know, whatever. Maybe you're not actually getting nine distinct speeds.
So this is actually, this is 52.3 RPM versus 52 RPM on the nose, which was, I think,
medium on the fan, low on the control. So yeah, it's not nine distinct speeds because some of
them are pretty much the same. Okay. This is medium and medium, and this is very quiet fan
too. There's really no motor hum to speak of. You get a little bit of wind noise on high,
but that's it. I can't really hear anything from it yet. It's remarkably good quality for
considering where it was sold. It's going a fair bit faster now. That's 87 RPM,
still completely silent. Okay. This is now high on the fan, medium on the wall control. So this is
the factory's or the wall control's factory medium. A slight sway to it now, but really
nothing major. It's in pretty good balance. You can hear a little bit of wind noise now,
but generally very quiet. That's 115 RPM. It seems to like to read in near where the irons are better
than the blades themselves. It's crazy that it's only 115 RPM. It looks like so much more just
because there's so many blades. Okay. Now I'm going to go back down to low on the fan,
and I'm going to go to high on the wall control. So this should be the factory's
stupid dyslexia. This should be the fan's factory speeds. It's going to take some time to slow down
because the bearings are so good on this. They're completely silent and just collide perfectly. It
takes a long time for this to get down to the actual operating speed when you're going from
a faster speed to a slower speed. I think these are some of the best bearings I've seen in a
new old stock product that sat unused for 30 something years. A lot of times ball bearings
will go bad sitting for decades on end not being used. The oil or the grease dries out and
they just kind of become spoiled. The lighting is just horrible in here today
for this video. It's not giving that nice warm aesthetic. It's kind of cloudy today. The sun's
been in and out. So between the cloudiness and the fact that we don't really get a good direct
sun coming in these windows this time of year, we just don't have good lighting to film in here with.
Okay so now I'll record the rpms and I'll type them into the video box so everybody can ignore
them. 61 rpm on low and I don't think that we're going to be able to get a cfm reading out of this.
It's a very very gentle breeze. It's not spinning the meter. Very quiet and reasonable airflow for
a low. I can hear the ever so slightest hum out of that motor but nothing beyond reason.
Not distracting either. Okay should be able to get a cfm reading now I would think.
Okay that is 114 rpm. Let's see if this piece of garbage is gonna cooperate today. This is just
barely enough to get it to spin. I can get 211 pretty steady so we'll go with 211. So that will
be 2954 cfm on medium and then on HIG. We'll go to HIG now and we get some wind noise on HIG but
nothing crazy. Pretty average amount of noise and yeah this this is pushing air pretty strong
which is surprising considering how many blades there are. That's 178 rpm which is a pretty
average high speed for a 52 inch fan but that's pretty fast considering how much weight is on
that motor with all those blades. All right now let's see if we can get a number here. Yeah 3
oh 413. 403 pretty stable. I'm gonna go with 403. 5642. Yeah okay so on HIG we're going to put this
oh sorry on HIG we'll put it on 5642. So that's it's you know not crazy above average but I would
say what is average like 5000 maybe and above average would be six to seven so it's approaching
above average territory. Just took the paper right off the table. It's pretty solid. The 5600 cfm is
not necessarily impressive by itself but considering the design you know a six blade unit
is not the best aerodynamics configuration by any means and we've proven that over and over.
I wish I had the anemometer when I was doing the multi-blade tests because it would have
been interesting to numerically quantify how much more cfm it moves with a three blade
configuration versus with a five blade I mean or a six blade. I suppose we could we could do that
when I swap it out we can assess the cfm as we take the blades off. I always like the high gloss
blades with the light on. I remember there used to be a restaurant I think it was called Ruby Tuesday
and it had I think I probably told this story when I put this up and I think I probably already put
the pictures in that other video. It had fans that were not this like this but the blades were a
similar color and they were also high gloss and I just vividly remember going to that restaurant
and seeing the reflection of the lights in the blades. I always thought that was pretty cool.
This towel needs to be ironed out but you can see it's it's pushing some pretty good air
so it looks nice and it works nice which is not always a common
co-existing factor and of course with a 560 watt bulb you've got a really nice bright light.
I have 40 watt bulbs in there right now and it does provide very nice lighting when you're
cooking in here. I think the vineyard is probably still the most powerful fan I've had in here
but this this is not that far behind. I think this the CFM rating is is pretty respectable
considering it is, oh it's not off, considering that it is a five blade unit and you'll see it's
going to coast for a very very long time. Does anybody know how long this was sold for
and or if it was sold for the same amount of time at Lowe's? I really feel like this would
have been or I thought it was a competitor to the Hampton Bay St. Clair because that also is a
Casablanca Victorian copy but you know the St. Clair was sold through the 2000s and this was
93 so this would have been much earlier. I'm not sure when the St. Clair started.
I know it can be traced back as early as 98 I think. I'm not familiar at all with Lowe's
lineup of fans. I don't have anything against them. They had plenty of nice units in the 90s
2000s but I just never paid any attention to them. I always liked the ones at the Home Depot
probably because of those catalogs and I remember seeing a lot of ones from the Home Depot around
too. I don't remember seeing a whole bunch of Lowe's stuff. You see occasional Harbor Breeze
classics or whatever around but definitely saw a lot more Hampton Bay in this area and I don't
know why because we have both stores. This thing just glides and glides. The bearings are in
excellent condition and there's a fair bit of weight on there too which is helping it run for longer.
