Assembling this SLEEK RX-9 for a LUCKY winner

The Technology of Old Crossbows
4 followers
4 Video Views·Feb 12, 2026
Assembling this SLEEK RX-9 for a LUCKY winner
Comments are disabled for this video.
All right, pretty cool.
We got a left-handed bow here.
This is for a dude that won this bow
at one of the tack events from me.
So had to order it in because he was lefty.
Got it in and now I'm gonna assemble it.
So I'm gonna assemble it with right here,
MX2 Rest Lefty.
He's gonna get one of the Spot Hog Boonies
and GoSticks stabilizers.
But I just wanted to show you real quick.
The only thing I really need to put this thing together,
torque wrenches, big set of Allens and a little set.
Got those.
I'm actually gonna kind of stick
with this murdered out theme.
So gonna use some like lighter colored knocking points
and gray loop and kind of just keep it dark
and then go with the smoke screen.
Wraps and veins.
Just for a little helpful tip,
if you ever need to like set up something for someone
or if you've ordered a bow and you are gonna sell it
and then set up the new one when it comes,
here's a little trick for you.
If you've got a bow that you just love it
and you know the drawing is exactly where you want it to be,
which this guy had a bow that he really liked.
So instead of me having to like try to fine tune
his drawing perfectly, I had him draw that bow back
and marked the arrow right here.
You can see that where I've marked the arrow
and I marked the arrow to the center of that burger button
because usually according to what you're supposed to do,
that hole should be right above pivot point right here.
So it gets you so dang close.
So if you ever do have a bow and you loved it,
couple numbers you should always save.
Mark an arrow exactly to that burger button
when you draw it back to full draw,
mark it perfectly, circle that,
right on your veins, do not touch my drawing.
And then you've always got it.
The other measurement you should do
is when you draw that bow back
and your bow's at a triangle,
measure from the P pipe straight down
to the center of the arrow shaft.
At full draw, that distance is gonna always be the same
depending on where you anchor and your eye height.
So knowing that number is really important.
If you always shot the same axle, axle length bow
and you always had the exact same string angle,
you could measure it at rest,
which I do that a lot of times
when I'm not changing very much,
I'll measure from the top of the knocking point
to the center of the P pipe.
But if you really wanna know your perfect thing
and you have a bow that's absolutely your favorite,
then I would recommend full draw P pipe
to center of the arrow shaft.
Then if you have those numbers, that's great.
Real quick, I'll just tell you fast here,
with this guy, should be super easy
once I go to set up the rest.
Our rests are actually set up from QAD
to the center tune specs that I gave them
for my Hoyt builds.
So when you take this out of the box and put it on,
you're gonna be dangerously close to a bullet hole
if your knocking point is at 90 degrees.
So it's kind of nice.
We've arranged for all of ours to be preset.
Plus the other thing is on the knock on MX2s,
can you see that distinguished V right there?
Okay, I have created a new launcher for our MX2s
with 10 degree more slope on both sides.
Cradles the arrow better.
I think if you've ever had one of these,
you notice if it's not that deep, if there's any wind,
sometimes it could get up on the side.
This is really channeling down
and it is pretty much maximized
and customized for four, five,
and six millimeter arrow shafts.
So I'm gonna mount this.
It's gonna be really easy going on right away.
Now out of the package, a boonie sight,
it'll be this way cause he's lefty.
But depending on their scope housing,
you may have to make one adjustment on this bracket.
I can tell you with, since he's gonna go
with the two pin like this,
all I'm gonna do in order to have this thing mounted on,
because I'm going pick rail on the front of this RX9 Ultra,
I just know I'm gonna take this bottom screw off
and watch, I'll take this scope.
I'm gonna remove it off the two pins.
Then what I'm gonna do is I'm gonna flip that around
eventually so that this dog leg right here,
I want it further away
so that the scope gets closer to the riser.
So it's gonna be really easy.
It's that one screw.
And then if you do the two screws that hold the scope on,
then I'll just do it here quick for you.
And that's pretty much all set to go.
We have adjusted out of the box.
Our sites do come in a whole setting
that is pretty much customized for my builds.
Again, most of the bows that I set up
from the Hoyt line anyway,
most of those ones that I set up,
I kind of determined where the up and down is
based on my peep height and where I put the knocking point.
And so then this site out of the package,
that rail is mounted in that location for you guys.
So, all right, I took the scope off, simple two screws.
Again, it was a left-handed, but it was this way.
So this dog leg right here was further out
away from the riser.
So all I'm gonna do is flip that,
put it right back in those two holes right there like that.
And so now this dog leg is further away.
So for you, you'd be looking at it this way.
So you can see the dog legs further away
versus the dog leg being there.
And now I'm just gonna put these two screws
back through this into the housing.
So scope housing, there's one of the screws.
And so now you'll be able to see,
that's gonna be super tight and ready to go.
So all I've got to do is mount these up.
You guys have seen me do a million knock points and loops.
So I am gonna do that.
Just a quick rundown.
For me personally, and not everybody's like this,
it really depends on your grip.
But for me and who I coach with the grips,
for a right-handed shooter,
I'm normally putting the thin silvers on the right,
picks on the left for a right-handed shooter.
And they've been tuning right down the pipe
and 90 degrees perfectly.
So I'm gonna make sure his cam spacing is where it's need.
I'm gonna mount everything up.
I'm gonna put his knocking point at 90 degrees.
And let's just leave the center shot on this rest,
right where it was.
So the rest come with gray, but in the knock-on versions,
you also have a secondary kit in there as well.
If you did want to change them out to the green,
there is multiple packs right there.
So if you did want to change out to green, you could.
So I'm gonna get this set up
and I'll check back in with you guys.
Look at this sucker.
Old smoke screen right here.
This thing is murdered out.
I love this.
Went with some translucent thread there
for tying in the peep and the silver bled through.
That's pretty cool.
Got white battleship gray right there.
Gonna go with the smoke screen wraps and white veins.
This thing looks so clean.
I hope you like it, dude.
Congrats to the winner who won this thing.
I can't guarantee the accuracy at a hundred yards
because left-handed, I am not great,
but it tuned easy as expected.
And this thing is set up right here at 90 degrees.
His peep height is six and an eighth.
So we've got that set.
We've got him on the super hard or extra hard on the wall.
Hopefully he likes that.
But congrats, buddy.
And an awesome day in the bojo, I'll tell you that.
I am gonna go practice and eat.
