The Secret to Recovering GOLD from Electronic Waste

Invest Insight
9 followers
Okay guys, welcome back to another Scrapping Irish video and as always I appreciate anyone taking the
time to come in and check out one of my videos. So on this one, what are we talking about? This
is a video I would have done loads of times but we get new subscribers coming to the channel and
asking me questions about how do you recover gold from certain products and stuff like that.
So this is one that pops up a lot and I said I decided I'd do another video on it.
If you've already watched this video, well one like it, I won't be watching this exact same video
but it's on ramfingers and graphics cards and sound cards and little wi-fi cards,
stuff like that sort of stuff. So we all know that these contain gold and the most easiest
gold to see on them of course is the gold that's here on the sticks themselves. But there is gold
in the chips but this video is not about the chips, this is about just these fingers. So as
always we'll be working with assets and stuff like that at some stage. So remember your safety,
having your proper gloves when dealing with it, having your mask and all that sort of stuff,
fume hoods, whatever way you have of dealing with it. Safety first guys, no amount of gold is going
to be worth risking it. So people were asking me how do I, is it really gold and how do you get it,
how do you process it? So yes it is really gold because again here's a sample of some gold I got
before from doing ramfingers. So there's the gold from before. So what I'm going to do on this video
I'm going to show you the process again one more time for people. So we're going to start off,
the first thing I'm going to have to do is trim the fingers. So that's, I just use anything you
can get to do it whatever way is easiest for you and it's just trim the fingers. So I try and trim
it as close as I can to the, I left a little bit of gold on the board because I don't want to try,
I want to try and get as much of that gold off the board but I don't want other material coming
with it. So I try and get it as close as I can. Sometimes I do too close and sometimes I leave
too much on but it doesn't make a difference as long as you get as close as you can. So something
like that is what I like to get done on it and it'll be the same again on these little
wi-fi connecting cards and stuff like that that are in your laptops and in your
computers. It's just trim them off, keep these other bits because there is still going to be
gold bearing material on them. So again no matter which size ram stick it is, whether it's the
long ones, the little ones from the laptops, it doesn't matter which ram sticks it is,
we're going to be just trimming them. That's all we're going to do. So I'm going to just trim these
just to show you there but I'm not going to show you the trimming every ram stick I have.
Now I don't have a huge amount to do but I have some graphics cards and stuff like that. So
some of these have come from graphics cards that were in sound cards and stuff like that. So some
of them have bigger fingers on them. So stuff like that I'm going to be doing and you can see here
I've got this pile here to do and there might be some more elsewhere that I'll be doing.
So when you come back we'll have all these trimmed and we'll have a look at what we ended up with.
So that's all we need to do. So just trim them fingers off guys, that's all you're doing and
we'll talk then when we get back about what the next step at doing that. So I'm just going to
continue do what I have to do here. So for you it's going to be instant. So let's see what we
ended up with. Right so we're about to do the copper chloride part of it. Well technically not
copper chloride this time yet because I always get asked about and someone else made a comment
on my video. One of my videos saying you don't have to use copper chloride. Hydrochloric acid
will work away just takes a little bit longer. Put a bubbler in. Well I always use a bubbler.
So we're going to try this just with hydrochloric acid. Now if I need to add some copper chloride
I will add some copper chloride to it to speed it up if I think it's taking too long
to work. So first off again I will be using a bubbler. So here's our
bubbler. So we put that down in the bottom as always and we pour the material over it.
So we'll be doing some ram fingers and other bits and pieces. So it's not just ram fingers it's in
there. We also have gold varying material for mobile phones so they're going to go in there.
So as you can see I've cleaned off all the chips and stuff like that as much as best I could.
I'm just going to throw these in. I'm going to let the acid work on them and for this one
I'm going to use only 10% or 12% hydrochloric acid because it was cheaper to buy and it'll
still be the same thing because it's a 12%. So technically I don't need to put all of this board
in I'll just break the bits off that have the bit of gold on them because we don't need to be
putting the whole board in. There's some sticky stuff over the fingers or over the gold
plating so you want to make sure that's all removed because if that's on it gold will stay
away from the acid. The acid can't technically get to it so it means then that you'll end up
wondering why there's gold still on something. So it's usually if there's a coating over it or
there's something stopping the acid getting to it so remove that. A nice little bit of
gold plated stuff there or gold flashed and then we're just going to add our 10%
hydrochloric acid to it. I'm just putting enough in to more or less cover the boards.
I don't need a huge amount just enough to cover them boards and let it work away. So I'm going to
put a cover on this let it all work away as long as the boards are under the acid it should work.
I will be adding more bits of gold bearing material to it because I still have more boards
mobile phone boards I have to clean off so they will be boards like that that still have
material on so I will be adding them into the mix as I go along and what I'll do is I'll take out
any boards that are the gold has come off and I'll add more boards until it gets fully saturated
so I'm going to let that work away and we can check in in a few days so I just want to make
sure everything is under the under there that's perfect I'll just stick the cover over it because
if it rains this it'll keep most of the rain from getting in and diluting it down even further
there we go so that's it guys we'll just let that work away
that was only 10% hydrochloric acid that was in there I think it was 10 I was at 12
10 to 14% so that's why I picked 12 as my number so we'll see how that works I've done it before
it has worked so we'll let that carry on you come back and well for you it's going to be instant but
for me it will be probably a few days and we'll see how the solution has worked see you later
right guys so it's been four days I think since I started this solution I didn't add any copper
chloride I just let it work away with the hydrochloric acid because it was pointed out
before to me that it can work just as good without actually adding any copper chloride
and eventually turns itself into copper chloride which is very true and so what did I say three
and a half four days something like that I'm trying to think um no actually uh it's the fifth day
five days um since I don't it was just left outside so that's just some rain water that
landed on the top and you can see the actual color of it is um very dark now it's gone
very dark you can see all them flakes that are in the solution so what I'm going to do
is I'm going to drain out the solution filter off any of the gold that I can get out going to
put back in anything that still has gold attached to it so some of the phone boards still have some
um and I'm going to add more boards to it but um you won't have to sit through another batch
we'll come back once I've it filtered show you what was in this lot then I'll do another batch
and then we'll get to showing what the total amount of gold from it so I'm just going to
filter the solution out and um we're going to see what gold flakes we've got so far
so this is the gold now after filtering from that copper chloride and so you can see in here
we have um our gold material so again it looks you know it looks like there's a lot of gold
there and stuff but by time you've refined this down now we've done a little bit of copper got
in there I don't know how that got in there oh get him out so we don't want him mixed in there
with the gold but um he must have fallen when I was doing something else just make sure there's
no gold left on him no no okay so um yeah good job I spotted him uh well it wouldn't have made
a big difference when I go to the next stage anyhow but we don't want to we don't want to
we want to be using the acid on this gold that's in here so you can see it in there it looks good
looks nice but um it's not a huge amount of gold and that's there but we'll keep doing more copper
chloride stuff more boards go in we keep using up our copper chloride until eventually we have
enough gold to move on to the next stage of it which would be I would plan on just moving this
straight on to the next stage but kind of weather's against me and stuff like that so I'm
not going to I've been mixing this gold in with other gold that I have so even this is some gold
that I have from um cpu pins that they're drying out so that's from another uh there's no video on
that coming but it's it's from pins I was doing in poor man's nitric acid so again if you don't
know what poor man's nitric acid is and go check out the videos I've done on the poor man's nitric
acid and if that's something that you will interest you and on how it and again there's
more gold flake in there so all this will be eventually mixed together and processed all
together and for the gold recovery so it doesn't matter what source the gold comes from whether
it's copper chloride uh nitric acid poor man's nitric whatever way I get the gold off the off
boards off the pins in the end it'll all go into the same mix at the end and it'll all go into my
aqua regia and we'll um recover the gold from that so I do get always asked a couple of this
I don't want to drag this on too long but a couple of people have been putting comments on videos
about copper chloride and having issues with copper chloride um so you shouldn't really have
an issue with copper chloride it's one of the easiest materials to or one of the easiest
solutions to use for gold recovery your issues a lot of the time will be so this is not having
a go at anyone or anything like that because I got a few messages about gold on boards and stuff
like that so um if I want to get the gold off there using copper chloride I make sure there's
nothing else on this board left if I took this into the copper chloride as it is now and expect
it to get this gold off it won't because the copper chloride will have to eat away all this
other metals first so it'll be in your iron it'll be in your brass it'll be your copper
before it lets all that before it gets to what's underneath the gold here so the acid will be used
up very quickly and won't get time so if you want to use copper chloride guys it's for clean boards
only so everything has to be off the boards bar the gold plating that you're trying to recover
so that's very important that's the biggest issue I see people are having so again cop this can be
chucked straight into copper chloride because there's nothing else on there only my gold
material so that can go in as it is into copper chloride this phone will have to be cleaned up
before it goes into copper chloride so you want to make sure all these chips are taken off all these
um pins are taken off here all this material is off and it's only the board itself that's
going into the copper chloride that is one of the biggest issues that people are running into
they're saying oh I put I put some boards into copper chloride and it doesn't seem to be taking
the gold off the gold is still on the boards and then I might get them to send me pictures and I
can see all these bits of metal chips everything's still on the boards that's not what copper chloride
is for guys copper chloride is for just attacking clean boards that have the gold on them so if
you're throwing boards in as they are then you will have issues I'm afraid to tell you and so
again even this board here so on this side it's nice and clean so some people go oh yeah I chuck
that in it's nice clean on this side it isn't we've chips on there we have bits of metal on there
we have um solder on here we have um MLCCs all this stuff so that the acid will eat away all
that solder and eat away all the metal that's on here before it begins to work on the actual
gold the the copper that's underneath this gold here to release the gold so all this stuff will
have to come off this board before it goes into copper chloride so again guys I was just showing
what I'm working at the moment so I've been working on that copper chloride we're collecting
that gold up and so hopefully at some stage we'll get this into aqua regia again if there's a video
you want a refresher on that people are saying can you know can we do an updated video on something
let me know and I will try and do it for you so if you want to see an updated on poor man's nitric
copper chloride again aqua regia and the the HCL and bleach method and to make that if you're not
sure on it you want an updated version of the video please let me know in the comments and
we'll get an updated version of the video done for you at some stage so as always appreciate
everyone that's been watching the videos subscribing to the channel all the new subscribers you're very
welcome to the channel thanks for coming in again if you're new I have mostly I have a video
on everything so far on gold recovery as I say I'm nearly up on 700 videos I'd say on here on the
channel so there's definitely a video there of uh and the gold recovery side of it all the different
methods um and there's definitely a video there on taking stuff worth what to look for on gold
what items have gold on boards and circle boards and stuff like that again if you want another
updated one on circuit boards we can do that and we can run through it and where's the gold on the
circuit board stuff like that we can do all that let me know in the comments so till the next video
guys stay safe thanks for the um likes thanks you for the um the subscriptions and thank you for
so appreciate you all guys see you on the next one
