Extracting 99% pure gold from scrap electronics

Invest Insight
9 followers
Hey! In the last video, we extracted gold from a MacBook. It's a modern device,
and there is not much gold in it. Everything is way too optimized to cut costs.
But when it comes to old-school electronics, it's a completely different story.
First, the gold plating is way thicker. Second, they used it a lot more generously.
In this video, we're scaling things up. We're going after a bunch of old gold-rich devices,
Well, I won't spoil how much just yet, but let's just say it's a lot more than last time.
So, why is gold even used in electronics? It's not like in jewelry. It's not for show.
It's there for purely technical reasons. Reason number one. Corrosion resistance.
Unlike iron, copper, or aluminum, gold doesn't react with air. It doesn't oxidize.
If a connector isn't gold-plated, give it 8-10 years, and it ends up looking like this.
Reason number two. Conductivity. Gold carries signals extremely well, with minimal loss.
That's why hardcore audiophiles buy insanely expensive gold-plated cables,
to reduce noise and interference. Reason number three. Durability.
Gold coating is surprisingly tough. Imagine plugging the same connector in and out 10,000
times. Gold can take that abuse and still keep the contact protected. Back in the day,
soldering and assembly processes were less refined, and the tech wasn't nearly as precise.
That's why older parts had way thicker gold layers. Just look at the difference between
old CPUs with those fat gold pads and today's chips, where the layer is extremely thin.
So, if we want to make some real money, we need old electronics. That's where the gold is.
We headed to a flea market, where random people sell all kinds of stuff, to see what we could find.
Most of the time, nothing valuable, just junk. But then we spotted this old-school desktop computer,
and the seller let it go for next to nothing. That chunky monitor. Haven't seen one of those
in years. We hauled it back to the car and kept looking. The booths were full of random
electronic scrap, not all of it worth grabbing. I spent a lot of time researching beforehand,
so we wouldn't miss anything valuable. Then I came across these circuit boards,
people call them greenies. They don't look like much, but the chips on them,
they likely have gold inside. And they were super cheap. Eventually, folks there started
offering us everything they had. But we had to filter stuff. This older guy had a whole pile
of radio parts laid out. Mostly junk, but I noticed a few pieces had that gold shine. Salt.
It's been a while since I've been in a place like this. You can seriously find anything. There were
even old phones lying around. We wandered for about two hours. And once our bags were full,
we headed home and hit the classifieds. A lot of people are selling ancient electronics online,
but some of the prices are just ridiculous. In many cases, I wasn't even sure we'd break even.
Some listings trade upset, perfect for gold refining. So, once we gathered everything up,
we headed back to the garage. We ended up with quite the haul. Here is what we got. 4.6 kilograms
of old RAM sticks. Some of them are ancient. There are even modules with just 64 megabytes.
There is definitely money to be made here. 10 kilograms of greenies. Circuit boards from TVs,
VCRs, radios, and other old electronics. They are not the most valuable category,
but there is still gold in them, mainly inside the chips. 2 kilograms of loose microchips.
It's hard to tell how much gold is actually in these. And now, the most exciting part. Two full
boxes of super old-school mobile phones. The kind with antennas. I didn't even grow up with these,
but back in the day, they were a premium tech. And finally, the big one. 30 kilograms of
motherboards, including some seriously vintage stuff. There is no doubt we'll be digging gold
out of this. Next up, CPUs. We've got some regular ones everyone's seen before, but also some really
old ceramic-based processors. Those actually have more gold in them. And then there is this giant
bag of mixed radio parts. It's just a pile of everything. Some of it looks like it's from 60
years ago, but most of it pretty much junk. So we need to sort it all out first. We go through
transistors, connectors, microchips, and wow, it's a pain. Everything's caked in decades of dust.
Wait, found something. Some kind of gold-plated connector. Definitely a few interesting pieces
in there. Oh man, we've stockpiled a ton of raw material. Let's start with… I really want to
check out that old computer. No clue what year it's from, but it's straight up dinosaur.
We plug in the mouse, keyboard, and speakers, power it on, and it boots. It's running Windows XP.
And there's still a bunch of programs installed. No way, GTA Vice City. That game came out in 2002.
There's even a save file from whoever owned it. I ended up just sitting there playing for a while.
Yeah, I've played it on modern PCs, but this felt totally different. The monitor actually
felt weirdly smooth, almost like it was running at 144Hz. Until it froze. Time to pop the cover off.
Inside, we've got a motherboard, graphics card, RAM, and a CPU. But honestly, we started feeling
kind of bad about tearing it apart. Especially since we already had plenty of components.
So we moved on to the motherboards. The most valuable parts here are the chipsets,
like the North Bridge and South Bridge. We desoldered them using a torch,
also pulled off the connectors with visible gold plating, and the CPU socket. But doing that alone
would've taken forever, so I called in some help. Once we teamed up, things went way faster,
and a lot more fun. The job was simple. Heat up the solder with a torch, pull out anything
that might contain gold, and sort it as we go. Only issue? The smoke. Tons of it. The fiberglass
in the boards gives off this nasty sharp smell when it burns. And since the garage wasn't well
ventilated, at one point it got so bad we could barely breathe. Then a neighbor came over to
complain we were stinking up the whole block. So yeah, time for plan B. We packed everything up,
loaded the car, and headed up into the woods to finish the job far from people.
We have to drag all our gear with us. But at least out here, the wind carries smoke away
and the air is fresh. The whole process took forever. We didn't even film some of it,
we just focused on working. By now, it's second nature. Visible gold plating goes in one pile,
chips in another. After finishing up with the PC boards, we jumped straight into processing
the greenies. There were a few gold-plated connectors here and there, but most of what
we found were microchips and ICS. And those needed to be desoldered too.
We worked late into the night, but finally got it done. And here is the result. A pretty solid
pile of chips and connectors. We packed everything back up. By the way, our clothes still
reeked from that burnt plastic smell, and even our hair stank. The next day, we got an early start to
squeeze in as much as possible. From the PC boards, we ended up with a whole container full of
connectors, sockets, and anything with visible gold plating. We also had a separate container
for chips, and another one for chipsets, the ones that coordinate everything on the motherboard.
These are seriously valuable. All the chips, we dumped them into a big basing. That included
the chips from the green boards, the whole bag of microchips we bought earlier, and even a shipment
that showed up that day with more ICS. All of it went into the same basing. Meanwhile, the gold
plated connectors from the green boards went into this container. Each type of material will
need a different recovery method. And as for the leftover junk, straight to the trash. We're still
a long way from the chemistry and actual gold recovery. Right now, it's all about preparing the
materials. We've already dealt with the motherboards, the greenies, and the microchips. What's left?
Everything else. Let's start with the RAM. These are old modules, which means more gold,
on the contacts, on the board itself, and inside the memory chips. But each part has to be processed
differently. So we need to separate the chips from the sticks. We assumed this step would be less
smoky, but nope. Even the fume extractor couldn't keep up. So yeah, once again, we packed everything
up and headed up into the woods. Luckily, there weren't too many RAM sticks, so this wasn't going
to take all day. All we had to do was heat up the chips and knock them off into a container.
Took us about 2 hours. Pretty quick. Now the chips are separated from the boards.
Back to the garage. Next up, phones. Look at this pile. There's a ton of them. We even found
the legendary Nokia 3310, famous for being basically indestructible. And check this out,
one of them has a rotating camera. Some of this still power on, believe it or not.
We also came across a classic, the Nokia Express Music. Every kid in school wanted one of these.
It had upgraded speakers, dedicated music buttons, even a camera.
Naturally, we got curious and tested how it shoots video. Yeah, let's just say it felt
better back in the day. Anyway, time to tear them down. We unscrew the backs,
remove the keypads. Wow, look at all that gold under the buttons. And start disassembling the
boards. It's the same deal as with the RAM. There's visible gold on the surface, but a lot
is hidden inside the chips, so those need to be desoldered too. And we did the same thing for all
the phones. Maybe in 20 years some of these will be considered collectibles, but right now they're
just outdated junk. And recovering gold is pretty much the only way to make any real profit of them.
Plus, let's be honest, it's way more fun this way. With that said, wrapping them is not exactly
exciting. At this point, we were honestly getting bored. Couldn't wait to finally get
to the chemistry part. There were so many different models, all built in different ways.
We ended up with one big box of shells and junk, and another box full of circuit boards,
some of which looked loaded. Oh, and we dumped all the phone chips into the same bin as the
RAM. As for the empty cases, don't need them anymore. Next up, CPUs. We've got the standard
ones, also some older ceramic-based processors, which have way more gold on them. They don't
really need much prep work, since most of the gold is already exposed. And we even scored a
legendary Pentium Pro. This thing holds the record for how much gold you can get from a single CPU.
By now, you're probably wondering what's what and where all these parts are coming from.
So, we started with 7 types of raw materials. And after all the prep work, we ended up with
6 distinct categories. Phone boards, processors, RAM contact fingers, chips, old ICS, gold-plated
connectors. Each of these will be processed separately, using different methods. Let's
start with the chips and old ICS. First, we need to get rid of all those metal legs and solder
dots. They'll interfere with the chemical reactions later on. We dump everything into a beaker and
start prepping the acid mix. Distilled water goes in first, then sulfuric acid, which heats up as
it touches the water. After that, we add nitric acid. We seal everything up so we can take it
out to the woods. We also packed up the chipsets from the motherboards.
At the side, we pour out some sand to distribute the heat more evenly.
Then, carefully add the acid mix. Wow, the reaction just exploded, way more intense than
I thought. Definitely glad we didn't try this in the garage. And yeah, this is exactly why that
reddish gas is called the foxtail. We waited for the first reaction to settle down.
Then, added a bunch of RAM chips and phone chips. They fit in the same beaker, along with the
chipsets. We tried lowering the heat to slow the reaction down a bit. But it didn't really help.
The reaction is self-heating. Look at all that vapor. Again, good thing we're not doing this
indoors. The reaction gradually slowed down, and all the metal legs dissolved into the liquid.
We pulled it off the fire and… Crap, regular jars aren't great for this stuff.
Anyway, the components now need to be thoroughly rinsed to get rid of any leftover acid.
We heat them with clean water. Then, took everything back into the garage
and gave it another proper rinse with a big batch of water.
And now, to get to the actual gold, we need to get rid of the plastic,
just like we did with the MacBook chips. But this time, the scale is way bigger.
We lit up a bonfire, placed a steel pan on top, and dumped in all the ICS.
To boost the burn temperature, we used a blower again to force air into the fire.
Oof, I had a feeling this was going to take a while. Sure enough, evening rolled around.
We originally planned to burn everything in batches, but it was taking forever,
so we built a second fire pit right next to the first one. Same setup, same steel pan.
This one was for the higher value chips, RAM chips, phone chips, and the motherboard chipsets.
From there, it was just a waiting game. We occasionally blasted the plastic with torches
to speed things up, but honestly, it didn't help much. The plastic gradually started to turn to
white, and we set the watching deep into the night.
Done! But we're not finished yet. We took the pans off the fire,
and now we had to grind everything down into powder. For that, we used a coffee grinder,
flipped the switch, and we got a fine black dust at the end. Then we sifted it to remove
the metal heat sinks that were hidden inside some of the chips. Batch by batch.
But then, the blender died. We managed to finish the first batch, but there was no chance it would
survive a second round. The next morning, we bought a new blender, this one a bit more serious
Hopefully, more durable. We kept going, grinding, sifting, and grinding again.
Then, we dumped each batch back into a pan for a second burn to get rid of any leftover organic
residue that might mess up the chemical reactions later. Little by little, the ash turned white.
The whole reburn took another two hours. We finally took it off the fire. In the end,
we had two full containers of powder. And somewhere in that fine gray dust is gold.
But now comes the big question. How do we get it out? In the last video, a lot of people didn't
really get how the gold extraction chemistry actually works. Imagine you've got a gold-plated
component, but it's mixed with other metals, like aluminum, copper, tin, or whatever else in there.
First, we pour nitric acid over it. Nitric acid is strong, but not strong enough to dissolve gold,
so it leaves the gold untouched while it eats away everything else. Then comes the key part,
aqua regia. That's a mixture of nitric acid and hydrochloric acid. And together,
they can dissolve gold completely. Once the gold is in solution, we just recover it back from the
liquid. That's the basic idea. Hopefully, that helps you understand the process a bit better.
So, that ash we made earlier, it still contains gold, but it's also packed with a bunch of
impurities and base metals. So, our next step is to etch those out using nitric acid.
We poured all the ash into beakers and once again headed out into the woods.
We diluted everything with distilled water, started heating it up, and slowly added the acid.
The reaction kicked in, but it wasn't that intense this time.
We did the same thing with the second beaker. Then came the waiting game. We had to stir
occasionally and wait for the reaction to completely stop. That took about an hour.
Finally, it was done. All the impurities were now dissolved in the liquid,
so it was time to filter it out. We started pouring it through the filter,
but for some reason it was super slow. After half an hour, basically nothing had passed through.
Turns out, the ash was clogging the filter. So, we tried to improvise a little device
to push the liquid through with pressure. Didn't help much. In the end, we just left it overnight.
Next day, we poured the filtered liquid back into a beaker. And yeah, it didn't filter well.
So, for the second batch, we tried a different method. We drilled a hole in a regular jar,
and glued in a vacuum valve. Then sealed up the lid, and hooked up a pump.
The idea was that the vacuum would pull the liquid through the filter. There's actual lab
glassware made for this, but well, we forgot to buy it. Still, it worked. The process went
way faster this time. We pulled out the filtered solids. And the leftover liquid,
we poured it down the drain. Don't worry, it's safe. The acid had already reacted,
and it was heavily diluted. So, the pipes are fine. The second batch filtered way better than
the first. Now, just like we did in the last video. No need to repeat the whole thing.
We prepared some aqua regia, we heated it up, and poured it over the ash. Constantly stirring,
and keeping it hot, so that all the gold, hopefully, dissolved into the liquid.
We kept it boiling for over an hour, adding fresh acid as needed.
Now, it was time to filter this gold-laced sludge. We rinsed everything thoroughly.
The gold solution would pass through the filter, while the leftover junk would stay on top.
We repeated the exact same process for the second batch,
and ended up with two separate gold solutions. From there, it's just like in part 1. We
neutralized leftover nitric acid using urea, adjusted the pH, and dropped in the hydrazine
to precipitate the gold. Then we dried and melted it in a crucible. This was the gold from the ICS,
and it came out to just 0.242 grams. But for the RAM chips and chipsets, we got a huge beat.
We didn't expect that at all. 2.7 grams! Now, that's a serious result. And keep in mind,
that's just 2 out of 6 sources. We still have 4 more to go. Before moving on, we took a break
to grab a bite and air out the garage a bit. Because next, we'll be using a slightly different
method. Let's go with the connectors next. These have exposed gold plating, so there is no point
in dissolving all the surrounding metal. Can you imagine how much acid we'd need? Instead,
we're going to use the Jin Chen reagent from China, which I talked about in the last video.
But for this amount, we'll need a lot of it. We start by pouring distilled water into a pot
and heating it up to about 60 degrees Celsius. Because this solution doesn't work in cold water.
Then we transfer it into a bucket. We add 200 grams of Jin Chen powder and mix it really well.
Then 44 grams of caustic soda and 53 grams of potassium ferrocyanide. That's the oxidizer
that kicks off the reaction. Mix everything thoroughly and then pour it over the connectors,
making sure they're completely submerged. The reaction takes a full 24 hours.
We also prepared another batch of the same solution for the remaining components.
Processors next. These also have exposed gold, so we can go straight to extraction. The regular
CPUs were ready to go right away, but the ceramic ones needed a bit of prep first.
We popped up their lids and underneath we found extra gold bonding wires connecting the silicon
die to the contacts on the substrate. Thankfully, there weren't too many of them, so this step
didn't take long. And of course, the Pentium Pro, the gold king, had two separate chips inside.
We dropped all the processors into a beaker and poured in the Jin Chen solution.
Same goes for the RAM fingers, but there's a twist. The boards are coated with protective lacquer
and some of the gold traces are hidden underneath it. So we stacked the RAM sticks into a beaker,
then we grabbed caustic soda. Alkali works great for dissolving lacquer. We gave it a good stir
and poured the solution over the boards. To speed things up, we heated the mixture.
Okay, maybe a bit too much. After the lacquer was gone, we poured the used alkali down the drain.
Then we rinsed the RAM stick thoroughly, so there wouldn't be any residue left to interfere with the
Jin Chen reaction. Once they were clean, we poured in the Jin Chen. Next up, phone circuit boards.
We stacked them vertically into a plastic bucket, but ran out of space, so we grabbed another one.
We also dumped in all the random parts we picked out from the radio components bag.
Then we poured the Jin Chen solution over everything.
Later we transferred the contents into a larger basin and added more solution. You'll see why in
a bit. Alright, at this point we had four batches soaking in Jin Chen, and right now somewhere in
those buckets precious grams of gold were quietly dissolving. It's a relatively simple chemical
reaction, and we let it run overnight. But I couldn't stop thinking about it.
Heroes was stressing me out. The reaction is supposed to run for around five hours, but
we left it going overnight. And since there are so many metal parts in the mix, they could start
prematurely pulling gold out of the solution, causing it to stick back onto the components.
If that happens, we'll either end up with way less gold, or worst case, everything drops out
and we'll get nothing. Yeah, can't sleep just thinking about this. The next morning I rushed
to the garage to check on everything. Turns out the CPU batch didn't have enough solution for how
many processors we threw in. Most of the plating was gone, but there were still some spots left
untouched. So we decided to save the old solution and pour in a fresh one. Same deal with the RAM
sticks. We had packed them too tightly, but the phone boards and connectors looked fine. We let
the second soak run for another half a day. And that did the trick. Even the Pentium Pro was
completely stripped of its gold. We drained everything into the same container as the first
batch. Look at this. These were shining just yesterday, loaded with gold. Now not a trace.
We tossed all the stripped components in the trash, because all the gold is now in the solution.
Next step, filtration. The jar we had was only 3 liters, and there was no way all that liquid
would fit. So we grabbed a big plastic water jug, stuck a funnel in the top, dropped in the filter,
and sealed it up by pouring water around the rim. We fired up the vacuum pump, and yep, it started
flowing. But the jug couldn't handle the pressure. So we had to baby it, constantly turning the pump
on and off just to finish filtering. We decided to keep the filters, just in case they held onto
any trace amount of gold. Next, we poured the filtered solution into a beaker to warm it up,
then transferred it back into a larger bucket. Now it's time for cementation using zinc. We
grabbed some zinc powder and started stirring it in. Here is how it works. Gold ions in the solution
touch the zinc, grab its electrons, and turn back into solid gold, which starts sticking to the zinc
itself. But to make it work properly, you have to stir the mix for a good 10 minutes,
then let it settle. After that, we carefully drained the excess liquid without disturbing
the sediment. We even transferred it into a narrow beaker and let it settle again,
just to be extra safe and not lose anything. Now we needed to get rid of the leftover zinc
by adding nitric acid. Wow, we slowly poured it in, stopping when the reaction stopped fizzing.
Then it was time to filter one last time. This time, the waste liquid drained through,
and everything we wanted stayed on the filter. So we pulled out the filter and poured aqua regia
directly onto it to dissolve the gold. The solution turned a deep rich color, which means,
yep, a lot of gold in there. We neutralized the leftover nitric acid with urea,
just like before, adding it until the reaction stopped. Then we adjusted the pH using a caustic
soda solution, checking it constantly with test strips. There we go, neutral. Finally,
we added hydrazine hydrochloride to precipitate the gold, but this time something different.
Instead of the usual golden precipitate, the entire solution just turned black.
We waited, and there it was, pure gold, just sitting in a thick layer.
We carefully siphoned off the excess liquid with a syringe, making sure not to disturb the sediment.
Then we transferred everything into a crucible, every last bit. We evaporated the water
and scraped the powder off the walls. Then, using a cut-off syringe, we packed it into a
small pellet for melting. We sprinkled in some borax, fired up the torch, but this time the
beads split into smaller pieces. So we poured everything into a clean crucible and remelted
it into one solid chunk. And just look at it, a massive bead of gold, about half a finger thick,
3 grams. That's already a serious win. And we're not even close to done yet,
we still have the phone boards, connectors and RAM modules waiting in line. Oh boy.
Let's move on to the phones. Look how well the gene chain worked, it completely stripped
everything. We poured the contents of both buckets into a single container and tossed out the waste.
Since we were working with a huge volume, we had to buy a 25 liter glass carboy and turn it into a
DIY filtration system. We dropped in the filter, sealed it and started pouring the solution in
little by little. With the pump running, we didn't have to worry about anything clogging or overflowing.
It filtered smoothly, gave us enough time to grab a snack. And yeah, we kept the filter too,
just in case. We divided the solution into two flasks and started heating them up to kick off
Then we poured everything back into the main bucket and repeated the same steps.
So we'll skip ahead a bit here. We etched out the zinc, dried the powder and melted it in a crucible.
This time the bead came out a little flattened, but wow, it was dense. 4.36 grams, no way!
That's wild! Next up, connectors. Junk gets tossed, same deal. Everything else goes into the filter.
Man, I'm so glad we built that carboy setup. Imagine trying to filter 17 liters without it.
We cemented the gold, etched out the zinc little by little, let it settle, scraped up the powder
tossed it into a crucible and melted it down. Another bead, this one smaller but still solid.
1.16 grams. Finally, the RAM modules. We started with a quick reheat, poured off the solution
and boom, the gold was totally stripped. Trash went to the bin. We started cementing,
but while adjusting the fume extractor, it broke. It was so corroded from the acid,
it just fell apart in my hands. So we had to finish the zinc etching outside.
Melted the final bead. Decent size, 1.78 grams. Alright, time to add it all up. Wait,
we almost forgot the filters. We burned them down, did the usual processing
and ended up with some weird sludge. Honestly, I didn't have enough chemistry knowledge to figure
out what it was or if any gold was even left in it. But hey, we're happy with the result either way.
Total yield, more than 13 grams. Now, we couldn't sell it legally, but there is basically a grey
market for this stuff. We had to let it go for below market price and ended up with 1384 dollars
instead of the 1520 we could've gotten at spot value. Still, not bad at all. This was a crazy
ride of a video. Look what happened to my suit. There are holes everywhere. Those are spots where
acid hit. And this one, it literally burned right through. Good thing I had a shirt underneath.
There are stains all over my pants too. They totally ruined. And the table completely came
apart from acid. Oh, and also, acid got into my sneakers. Those stains, they are never coming out.
And this, it's so brittle now, it could break from a light breeze of wind.
Thanks for watching and I'll see you in the next one. Peace!
