Hook Bail Detachable Cabochon Pendant Wire Wrapping Tutorial 4K

Cozy Beads
9 followers
7 Video Views·Feb 8, 2026
Materials:
4 pieces of square 21 gauge dead-soft wire, 8 inches long each
24 gauge half-round dead-soft wire(just keep it on the spool and use as needed).
I am using a Smoky Quartz (about 13mm tall)
AI Generated·May contain errors
Hi everybody this is Oksana. Today we're going to make this really special little pendant. I know
it looks normal but if you turn it to the side instead of a normal bail it has a little hook
and that makes it really cool because not only can you just wear it on its own like a normal pendant
you can attach it to any sort of pendant that has a little gap on the bottom. So for example this
pendant from my previous tutorial from a week before. Sorry I struggled a little bit there but
this is how you would attach and have it either be a two stone pendant or a single stone pendant.
But really you can attach it to lots of different things. You can attach it to any pendant
that has a little gap on the bottom and it will dangle from that. So it's a really neat
versatile pendant and before we get started I just want to say a huge thank you to Rio Grande
for sponsoring this video. I'm using their wonderful copper wire as well as tools that
you'll find on their website. They're really great for wire wrapping. So without further ado let's get
started making this pendant. We're going to be using two types of wire. First is our square copper
this is 21 gauge dead soft copper wire from RioGrande.com and then we are going to be also
using the half round as well. This is 24 gauge half round. It's also dead soft copper. So for my
tools I'm going to be using these wire cutters. These are the Swanstrom brand and then these
Lindstrom pliers that are the RX 7890. You can find both of these on the Rio Grande website
and then for shaping the hook it's up to you. If you happen to have some bail making pliers
they work really great. These are really old that I got like 10 years ago from the craft store
but you can alternatively if you don't have them you can try using some round nose pliers instead.
These are also Lindstrom brand RX 7590 because you really just need something round to bend the
hook around. So it's up to you and this is my stone. It's really really small it's a smoky quartz
and it's a little oval that measures about
let's say like 13 millimeters or a little bit more than half an inch just like a smidge more
than half an inch and it is very small so I'm going to be using this 21 gauge wire which is
a little on the thinner side but feel free to use a larger stone and feel free to use thicker wire
if you want to use 20 gauge instead. It's just going to be kind of hard to use 20 gauge since
my stone is so small so it's about let's just say it's eight inches. I cut these a little long but
about eight inches should be adequate especially for a stone this size and you are going to need
four pieces of that 21 gauge wire. So what you're going to do is you're going to take one of them
and you're going to set it aside for later and you're going to start with just three.
So with our half round wire here it's on the spool just grabbing the end of it here it is
and I am going to kind of align these three wires together side by side. They kind of stack together
since it's square wire and has those flat edges. I'm going to grab it roughly in the middle
and then take that half round wire the flat side down and the half rounded side up and I am going to
wrap it around and around just enough to connect my wires together. Okay that should be adequate
you just want them to stay together and not come apart. So what I'm going to do now is with my
wire cutters I'm just going to come in and trim off the ends and now with my pliers I'm just going
to press down on the wire ends and then just on this whole little area and then you can see the
spacing of it it's a little bit spaced out it's a little bit of a gap so I'm just gonna tighten
that up just like that. Let's press down on it one more time. So my stone is an oval shape so I'm
going to bend this in a curve because the bottom of my stone is a curve. If you're using say a
little teardrop you would need to position it point down and then you would need to bend this
to fit the point of your teardrop. This design will work for a teardrop but you just have to
bend this frame around it and position it point down. So now I'm putting my stone into that little
curve that I bent and I'm bending my wires around it like this just around the edges of my stone.
Okay and now I am taking kind of the ends of the wires and just kind of curving them
away from each other so that when I bring them together they're not going to crisscross.
So I want to bring them together here at the top you can kind of place this down on like a table or
something and you want there to be a bit of a gap here above your stone not a huge one but just not
a super tiny space because you're gonna have to use that space. So now I'm just bending the wire
ends here back and forth side to side so that I can put these little angular bends in them and
then this comes together like so. So this is the frame for our stone you can kind of reinforce
the bends with your pliers if you want and just press down on this whole thing
to make sure that it's good. Alright so this is how it's going to go but before we do that
I'm going to do something with that fourth wire. So we're going to take that fourth wire
we're going to bend it in half so here at this halfway mark we're going to make a nice sharp
bend and then we are gonna just smush that down so that it's just completely bent
in half like so. Now we're going to make a little hook. First I'm going to use the
smallest portion of them and grab just the very tip and put a little curve in it like so
and then I'm going to use the next part which is this part here and I'm going to bend around
that portion and then just kind of bend towards myself a little bit here which creates this
little hook looking. So now we just need to attach this hook to the other wires and it's
going to serve as a bail. So just take the little hook kind of hold it here hold it kind of far
down we want to separate these but we don't want to separate them up top we want to only separate
them kind of further down like that. So what you want to do is we're going to grab this again
we're going to figure out which wires here are the front most wire all right so these two oops
grabbed two by accident so this is the front most wire here see how I just kind of separate it out
so I'm gonna slide that in here actually I should have bent this a little bit
higher let's try that again it's just not letting me slide it down far enough
all right so I want to position this so that the hook is kind of like where you'd want your bail
to be see that and I know it's a little bit difficult but you want to hold all of these wires
together and just kind of have these new ones that we added just kind of fit in there so that we can
take our half round wire and we are just going to connect that by wrapping it around
just going to press on that a little bit let's tighten that up this half round wire
actually it's still a little loose there we go nice tight wrap connecting all
all of the wires together so after I wrapped it a few times I'm just going to push it through
the middle here this is way too long of a wire end that I grabbed that's okay so now
they're connected like this but you don't want this whole thing to unravel normally we continue
with this and we make our bail but since that little hook is going to be our bail what you
want to do is wrap this around something else so that something else for me is going to be these
back most two wires so I'm going to take the back most two wires and I'm going to
just kind of bend them so they're side by side here and as you can see they are underneath
that hook see the hook there right underneath it there so they're bent and they're side by side and
now this wire that's going around here if I just kind of continue wrapping it and then I'm going
to wrap it around these two wires here that I just bent and you don't want to do this too long
it's not like the bail where you wrap it for a really long time
you just want it to be long enough so that it doesn't unravel okay so about three times
is what it's going to be for me so I'm going to take the little wire and trim it here on the
underneath portion and let's turn this one off as well just get in here oops as close as you can
and just trim that so now we are going to press down on that little wire end
and just press down on this whole little section here and what we're going to do is we're going to
come in here and just a little bit below that wrap that we did and we are going to make a bend
like this and then we're going to push down like so you can tighten up that little wrap
so by doing that we've pushed the wires flush against the rest of the piece and now we can
come in here and just below that wrap trim the wires off like so so now we have two wires on
this side two wires on this side and then this little hook with these little wires coming out
of it so let's go ahead and lock our stone in just so we can see the little space up here
that we're going to be working with so first I'm going to lock it in from the back by bending the
back most wires onto the stone I'm just making a small bend since my stone is a bit translucent
if I bend the wire a lot you will be able to see the wire through the stone
and it looks like this little wrap slid a little bit to the side so I'm just going to push it
centered again so here on the front you have your front most wire and you can just kind of wedge
your pliers in there and you can give this a bend or just leave it like that just kind of wedged apart
and do that to the other side as well just kind of push your pliers to create that little space
and then what you can do is you can follow this wire along since we have it right here
and right here and you can pull on it to tighten it up around the edges of the stone
and just kind of pull on it little by little and it's going to pull it up and tighten it up you
can even just come in here with your pliers and just kind of give it a little squish
and then let's pull on that and you can see it tightened the wire up so it's
trapping the edges of the stone without having that bend on the bottom like we normally have
and I can also see that the side wires are not flush against the stone so let me just press down
on that here's what that looks like so let's get rid of these wires here from the hook what we're
going to do is we're just going to bring them to the back just do it in the same kind of same
height on both sides like so and then we can trim and tuck away the wire ends there so just trim
both of those and we'll tuck those away by taking that wire end kind of turning it inwards
and pressing it down in there and then same thing with this one tuck it in and let's press down on
that nope I'm just going to turn it a little more so now we just have these four wires to finish off
you can finish them off in different ways you can make swirls and
just kind of different things I'll just try to do something simple so I'm going to take
the ones in the back and I'm just going to push them off to the side so they're just going straight
across here just like a line and then I'm going to take each one of these wires so we'll start
with the right one and I'm going to bend it kind of around that wire there and then same thing here
bringing it around like that then I'm going to trim but leave a little bit of the wire there
you'll see in a second why we need that so basically it formed like a little loop
and what we want to do is kind of close up that loop and that's going to help hide away
the little wire end as well by closing up that loop and then we can just press down on it this
way also to further help press down on those little wire ends and kind of press them in there
so here's what that looks like and now we just have these two wires so what I'm going to do
is just kind of swoop them across nice and tight I don't want like a huge
spacing or a huge gap there so basically you just want them to crisscross and then
go to the back here from front to back and just make sure that where you bend them is above the
stone so we can tuck away those little wire ends that we have going on there so then just take
those little wire ends and curve them inside and press down on them like so and that is it
and so what you can do with this pendant is you can wear it on its own or since it's a little hook
this was a previous tutorial that I posted before this one you can attach it on this little
portion and you can have a little dangle that you can either attach or remove from your pendant
and then alternatively there are some other videos I have that this will attach to so
let me just show you and I'll leave you links below so I posted this video a little while back
where I made this little dangle so instead of making this little kind of permanent
dangle you just make that little loop and this can attach to it or detach
and then I have this little pendant that I made a while back that this can attach to as well
and then basically anything with a little gap on the bottom this also was a tutorial
I posted a while back so anything that has a kind of gap on the bottom you can just attach this to
so it's really fun and really versatile and gives you a lot of options as well so I hope that you
enjoyed this cute little hook pendant please leave me a like down below if you did and don't
forget to subscribe I post new videos every weekend thank you so much for watching and I'll
see you next time bye
