We’ll show you one of 5 ways to wind up extension cords. Used widely in the trades and AV/Video industry, learn how to wind up cordage using the over-and-under method!
This is one in a series of episodes showing different methods of winding up and/or using extension cords. In this series, we will show the chain, over-and-under, figure 8, cord reel, and cord bucket approaches.
This episode features the “over-and-under” method. Is it the best way to get a tangle-free cable? Many think so - it’s that good! You make up your own mind!
No mind what method you use to wind up your cord, always get the best extension cord you can afford. The cheaper the cord, the stiffer it will be, especially in cold weather.
The cord will come packaged as a coil (much like a garden hose) or looped into an oblong shape with a sleeve around the middle. The first thing you need to do is unwind the cord and stretch it out somewhere in the sun. It can be on the lawn, sidewalk, or driveway. Leave it out for about an hour to get the cord warm so it can “relax” and lose any memory it acquired during the time it was packaged. If it’s winter when you get your cord, place the cord somewhere warm until the cord is supple. Now you wind up the cord using the method you prefer.
To do the “over and under” method, begin with the end that has the pronged plug end. Hold the end of the cord in one hand and reach down along the cord and lift to create the loop size you prefer - but avoid small loops. Large, loose loops are best. Then, coil the first cord loop alongside the cord end in an “over” motion.
You’ll feel the cord rotate along its length. If you kept winding the cord in repeated “over” loops, you will have a cord that is actually twisting along its length - essentially a cord “spiral”. Not good.
To avoid this, this is where the magic comes in. You simply counter the right-hand twist by doing an “under” loop next. Again, reach down the length of the cord, grasp, and lift while rolling the cord slightly in the opposite direction and then tuck up the loop alongside the loop waiting for it.
Continue this alternating pattern until you reach the end of the cord, and then you can plug the pronged end into the slotted end.
An easy way to remember this method (as well as keep track of where you are), the phrase “overworked and underpaid” is useful!
When it comes time to use the cord, unplug the two ends, and let the end play off the stack of loops naturally. Don’t pass the end of the cord through the center of the loops or you won’t like the result!
This method works for power cords, AV cables, and music equipment cables (I use this method for the cable for my electric bass guitar). In fact, it is the “go-to” method that professionals use in entertainment, film, corporate entertainment, and concert industries.
Cables play out beautifully, lay flat, and minimize twisting of the cable so it will last longer.
Check out these other methods that trade professionals use as well:
Hey Dirt Farmer Jay here from DirtFarmerJay.com. Today I'm going to show you a cord winding method
that is used both in the building trades as well as in the audiovisual realm. It is a great method,
stick around and I'll show you how to do it. Hey Dirt Farmer Jay here from DirtFarmerJay.com.
This is one in a series of different methods that pros use to wind up their cords. I'm going to
show you in this episode what is commonly called the over and under method. But before we get to
that, a couple things I want to point out to you. Number one, always buy the best cords you possibly
can. It pays to invest more to pay for good cordage that is soft and flexible and will also
remain flexible in lower temperatures and resist abrasion. Secondly, when you get the cord usually
from your retailer, it's either going to be wound up in a round shape like you see here or it'll be
in a loop with a sleeve. And the first thing you want to do is take that out of that packaging,
stretch it out across the lawn or someplace on the driveway or whatever it is and leave it out
for a couple hours in the sun to warm it up and to release the memory in the cord so it's ready to
coil up in the method that you choose to do. Now what I'm going to do is show you what's called the
over under method and I'm going to give you the pros and cons of it. So let's get started. We're
going to be demonstrating this method, the over and under method, using this really nice cord from
Watts Wire. A couple reasons I like this cord. Number one, it's very soft, flexible, it's rated for
outdoor use in an oily environment. So wherever you're working it's going to serve you well.
This 50 footer also has a triple tap on the end that is really nice here and it illuminates when
it's energized so you now have power at the tap. So here's what you do. You're going to create a
medium-sized loop. Don't do these little loops like this. Do a medium-sized loop and this is over
and then the next loop we're going to go under like that. Now the next one we're going to do
over. The next one we're going to do under and it's rolling in my hand as it goes. I can feel
the cord already starting to develop memory. All right so I'm going to speed it up a little
bit here because in case you think well this takes forever. All I'm going to do here is over
if you want to remember overworked underpaid overworked underpaid overworked underpaid
and so forth right up the end and what this is doing it's counseling the roll each time there's
a right hand roll there's a left hand roll also and now you have cordage right here that you can
simply plug the end together to store the two ends and you can either leave it like that right
there or if you like you can use a cord keeper of some kind to bundle it to hang it and when you go
to play it out it will not tangle incidentally that not only works really well with power cordage
it also works with audio visual cables guitar cables if you're a musician great way to do your
your cables that way so they don't kink while you're on the stage or you're playing out the
cables and this also can be used believe it or not with air compressor hoses so when it's time
to throw out the hose you don't end up with these big kinks and what's really nice about this is
this will lay flat. All right let's talk about the pros and cons of this the pros are is that even in
cool weather you're going to end up with cordage that lies a lot flatter and therefore reduces
trip hazard so that is a big one. Number two you're going to end up with a lot less kinks and knots
and that sort of thing so this is a time-tested method as I said used both in the av industries
and in the trades whether it's heavy construction framing whatever it might be cords that are wound
this way perform flawlessly by laying out flat and with a minimum kinks so what are the cons well
number one you need to develop the technique until you understand how to wind the cord
dependably each time and so it hangs right number one number two if someone grabs the cord from the
wrong end and for instance takes this end and pulls it through you're going to end up knotting this up
so like any of the methods we'll show you you need to know how the cord was wound and then how to
unwind it so there's a couple of cons on that but those are pretty minor well that's it for the over
and under method but if you'd like to check out the other methods that trade professionals use
across the world check out this link over here where we'll show you one of those methods and
then also while you're at it check out this video that youtube thinks is perfect for you
and so do we until the next time this is Dirt Farmer Jay
from DirtFarmerJay.com enjoying a twist free cord