Making my Porsche 992 LOOK Like a SUPERCAR

Tuning Pro
54 followers
1 Video View·Feb 7, 2026
AI Generated·May contain errors
In our last video, we covered a lot of the performance
we're going to be doing to this car
to make sure that we get several hundred horsepower extra.
To do that, we have pure turbos,
we have an APR carbon fiber intake,
we have brand new BMC filters,
all of that pressurized air is going through
DO88 upgraded piping.
We also have the DO88 plenum over here,
but everything is cooled with a CSF cooler,
the best in the business.
And of course, we have the best exhaust on the market,
the Akrapovic center section and their high flow link pipes.
And while everything was open,
we took the opportunity to install
brand new Porsche OEM spark plugs,
properly gapped for big boost.
Now, while I love the Carrera,
when you compare it to cars like the Turbo S or the GT3,
these just come across as super basic.
So let's overhaul the exterior of this car
to make it look as mean as it's going to sound and perform.
We have the 911 pretty well stripped down.
These are all of the OEM parts that we removed
and they're going to be replaced with these.
So let's take a moment to talk about some of the differences.
Now, starting on the front lip, as you can see,
the front lip, I had the stock plastic lip
and I'm going with one that looks
pretty much exactly the same.
However, it is in dry carbon.
Now for all of this carbon, it is all dry carbon.
A lot of people think that it means either matte or glossy.
That is totally wrong.
Dry is the highest quality carbon
that you can get on the market.
And that is exactly what this is.
And it does come available in gloss or matte.
Now, as you can see,
most of this is kind of a matte or a satin look.
Once we're done installing all of this,
I am going to have it stealth wrap
just like the rest of my car
so that everything is super cohesive.
Next up, you can see the mirror caps.
We are also replacing these with real carbon fiber.
For the side skirts, if you take a look at the OEM,
it basically just kind of stops here
and tucks under the car.
However, with our new carbon fiber one,
instead of stopping here, it also protrudes out.
This is going to give the car a wider feeling,
make it look like it has a wider stance.
For the hood, I'm going for that again,
GT3S kind of look.
Has those two vents in the front,
which also flow through those little grates
to that new piece of carbon,
which is going to replace a piece of plastic.
Now, continuing our GT3S theme for the exterior,
the deck lid is super aggressive,
especially when you compare it to stock.
The stock was very nice.
It's very classy and it's also kind of boring.
So I want to try this out.
Is this too aggressive?
I don't know, especially the wing.
I will say, I don't know if it's going to look good or not.
So we are going to test it out.
But at the end of the day, if I don't like any of this,
all I need to do is swap it back.
Nothing that I'm doing today is permanent.
So if I don't like the overall look,
it's very possible that I'll just put everything back
the way it was because this is a nice look,
but I want it to look amazing.
So that's why I'm going to test the waters
on some of these things.
And then in the back, we have this really cool duckbill.
Instead of just going down,
it basically down to this point here,
which is the factory one.
It also lifts up.
I think this is going to look incredible
with or without that wing.
Now for the diffuser,
it is basically a direct replica of what the car had,
but it's going to be carbon.
Again, I want everything to look very cohesive,
but we'll also be adding these Akrapovic titanium tips.
This whole thing, I really hope,
is going to look absolutely stellar.
So with that, let's get started installing.
All right, so as you saw,
we just got done installing our uprights for our wing,
which I can't wait to see how it's going to look.
I don't know if I'm going to love it or hate it,
but what I do love is this duckbill in dry carbon fiber.
It looks so good, especially in matte.
The diffuser came out really good.
I have some small tip adjustments that I need to do,
but while everything is totally open,
and since we did turbos in the last video,
it just makes sense for us to change the oil.
Now, if you've watched our channel for any length of time,
you'll know that we run Liqui Moly's 4110 in these cars.
This has Porsche C40 oil certification,
so that way there's going to be no warranty concerns.
Although I think with these turbos,
my warranty is pretty much out the window here,
but it's going to give us all the protection that we need.
And since we're going to be taking this to the racetrack,
we're going to be taking this a step further,
and we're going to be adding Liqui Moly's MOS2,
which is an anti-friction agent,
ensuring that everything is properly lubricated
above and beyond.
Again, we started with the Liqui Moly turbocharger additive
to make sure that the turbo is protected.
We have high quality oil,
and then we're taking it above and beyond
because we are taking no risks
as we push this car to 700 horsepower.
While we're also there,
I'm going to be installing our keys valve controller.
If you guys know Porsche,
you'll know that they limit your sound
by limiting how open your valves are.
Even when you have it on sport mode and it's fully open,
typically they just open a little bit,
and then as you climb the RPM range, it slowly opens up.
With the keys valve controller,
you can fully open it at the press of a button,
giving you maximum sound for your exhaust,
whether you have a factory
or something like an aftermarket Akrapovic exhaust.
So with that, let's change the oil and throw this in.
Okay.
I got to admit, I was really nervous for this
because it was a lot of money
and I really didn't want it to look terrible,
and part of me thought it was going to look really bad,
and I do have to adjust some body lines.
That's something I'm going to do off camera later on,
but I will say this thing looks so good.
It looks so aggressive, especially with the matte carbon fiber
and then once we sat and PPF it and it matches the car,
I just feel like right now it's going to look so naked
if I take it back off.
I love it for now, so I think it's going to stay.
But I can't have the back of the car looking this good
and have the front being plain,
so let's continue with carbon fiber mirror caps.
All right, the carbon fiber mirror cap is installed
and it looks incredible,
and while we're in this area,
there's one more very important thing to do,
and that is install the keys wind buffeter.
These are super important, especially on the 911.
If you've driven these on track,
typically you have to drive with your windows down
and you cannot touch the sunroof,
and when you have this window down and that window,
you get that helicopter sound like you have a four-door
and your kid in the back puts the window down.
You know the sound.
It's like,
and it's super annoying,
but by installing a wind buffeter,
what it does is it throws the air around your window
and it quiets down that sound
to make it a much more enjoyable drive.
Now, as you can see, this is one of my 3D prints.
We did a bunch of CAD files
and we tried to work with a variety of different designs
to really see what was going to be the most effective
and the most aesthetically pleasing.
What we did is we had these manufactured
right over the bridge in Philadelphia,
so this is a U.S. born and bred product.
From design, we did all the CAD files, the 3D scanning,
all the way through the final development and production,
and all you need to do, it is so easy to install.
You basically just peel the tape that we pre-install.
It goes right on just like this and that's it.
Now it's time for side skirts.
All right, the side skirts are on.
They fit absolutely perfect and they look incredible.
I love how it gives it a wider stance.
So now let's continue with the front with the hood.
All right, we just got the hood fully installed
and unfortunately, unlike some of the carbon,
like the mirror caps, side skirts and whatnot,
they were a 10 out of 10.
I think this one's a one out of 10.
As you can see over here,
everything from basically the headlight back
is absolutely perfect, but for whatever reason,
there's no curve from here to here.
You can see I can still stick my hand in
and if I push this down, it just ruins the fitment.
Sometimes carbon fiber needs a little sanding,
needs a little modification.
Unfortunately, you can't bend it more,
so it sounds like at the moment,
I might just be putting my stock hood back,
which I'm also fine with.
Just like I said on the wing, if I didn't really like it,
I was just gonna put the stock system back
and unfortunately, that kind of looks like the situation
with the hood, but we're not gonna let it ruin our day
because we have so much more to do.
Now on a good note, the other day,
I received a call from CSF.
They told me that they just released
the whole new coolers for the 992.
They have the one for the left side of the car,
the right side, and they even have the center one,
which you can see my car was not optioned with,
but since CSF came out
with an upgraded center cooler as well,
I can now retrofit it with genuine Porsche products.
So let's start off by getting these old coolers out.
Oh no, oh no.
All right, so now that we have the old coolers off,
again, the car only came with the left cooler
and the right.
It did not include a center
because the centers are typically found
on the GT3s, the Turbo S, and also the 992.2 GTS,
but the cool thing is CSF figured out
exactly how to retrofit this,
and really, it's not all that many parts.
If you take a look at the table,
we'll have the parts for you listed below,
but it's basically two little hose,
a couple different clips, some plastic shrouding,
and that's literally it.
All you're going to do
is basically remove these little caps here,
install these tubes so that everything flows through,
and you're going to maximize the cooling
with CSF's center radiator.
Now, if you've watched our videos in the past,
you'll know I have a CSF intercooler in here,
and we've used CSF on a ton of different builds.
BMW, Porsche, you name it, we've probably used CSF.
If you take a look at the overall build quality,
the factory one is literally metal
that's crimped on plastic end tank,
and it's not very good.
The CSF one is entirely aluminum,
and it handles heat between 20 to 25% better,
and it fits like OEM.
So with that, let's throw it in.
All right, we just got done installing all three coolers.
As you can see, everything fits absolutely perfect.
What's really cool about the center cooler
is as you can see,
it's really only this back piece of plastic.
There's these little plastic plugs,
couple nuts and bolts,
and then there's a hose that connects
directly to the CSF cooler.
Then on the other side,
it's literally the same thing, just mirrored.
It's literally just a little hose.
I thought this was going to be
a pretty big, extensive project,
but what Porsche does is in their manufacturing,
they're as efficient as possible.
They have these little studs up here,
and then they already have holes.
It literally took us like five minutes.
I was wildly impressed.
I've done retrofits before that took hours and hours.
I thought this would be the same.
It was like five minutes and we're done.
So now what we're going to be doing
is we're going to install our plastic shrouding,
but we want to make sure that our new coolers
and also these condensers stay protected.
So we have some Rennline rock guards
that we're going to be installing
to protect both condensers and also our center cooler.
So let me get these installed,
and then there's one more thing you need to do.
You need to swap out the piece of trim
that goes in this section.
If you have a 992, you'll probably know
that you might have a sensor or so,
but it's pretty much blocked off.
Porsche actually manufactures a variety
of different grill inserts for different options like this.
So what you typically do is you just pop the old one out,
pop this in, and then you have all the airflow that you need.
And while we're there, you guessed it,
I have a carbon fiber front lip.
So let's get that all installed
and then put the bumper back on the car.
All right, a little progress report for you.
As you can see, we have the bumper fully installed.
I did make a little mistake.
When I ordered the insert for the bumper,
I waited over a month for it.
It had to come special order from Germany,
and unfortunately, the one they sent me
was not the right one.
So what we ended up doing, we just did it off camera.
We took our OEM one, and if you take a look at yours,
you're going to have a piece that looks something like this,
and then there's a piece that pops up.
Basically what we did is we just followed this line here.
We made a super clean cut.
If you want to come check it out.
It looks very nice.
It looks very OEM,
but this was definitely a less expensive route.
I was willing to pay the money to do it with a new part,
but unfortunately, even at the dealer level,
it was just very difficult to find one
for this specific bumper.
If you take a look at this trim on my bumper,
it kind of goes down.
There's like these triangular pieces.
The one they sent me was kind of rectangular.
So I think this is for the other style bumper,
but no worries because this actually turned out
really, really nice.
And now that I know how to do it,
I would prefer doing it this way anyway.
It's cheaper, it fits perfect, and it looks amazing.
Now for that carbon fiber front lip,
as you can see, we went with a very small style.
I think these look classy,
and I think it looks really nice.
I don't think you need an obnoxious piece of carbon
on the front of the car,
unless you're heavily tracking it
and you really need all that down force.
But for me, I think this looks absolutely perfect.
Now, while we were assembling everything,
we also put on some brand new clear OEM side markers
from Porsche,
just to make sure that everything is super clean and crisp.
All right, so what we're going to do now
is we're going to knock out the OEM hood replacement.
We're going to fill and bleed the coolant
because we lost most of it with these front coolers.
And then we're going to show you guys the final result.
All right, now that the car is off the lift,
I want to give you guys a sneak peek
on how everything is coming together.
Now, starting with the front,
we have CSF coolers,
not too like the car came with from the factory,
but we retrofitted that third one.
We cut the hole in everything,
looks like it came like this from the factory.
And to make sure that everything is well protected,
we have these rock guards from Rennline.
Now let's talk about the carbon fiber on the front end.
As you can see, we have an OEM style,
very subtle, very nice looking front lip.
But unfortunately, the hood, it just didn't work out.
The fitment wasn't very good
and it wasn't something that we felt comfortable running.
So we decided to scrap that.
Will we run another one in the future?
I don't really know.
If it fits like that last one, absolutely not.
I would rather this, but we'll see what the future holds.
Last thing on the front bumper we did
was OEM clear side markers from Porsche.
For whatever reason, these tend to fail,
even the OEM ones.
So we just put a fresh set on
while we're going through this entire overhaul.
On the side of the car,
we have carbon fiber mirror caps,
our very own wind buffeters to make sure
that it's not going to give you
that wind buffeting helicopter sound
when you have the windows down.
And then these side skirts.
I love the way these side skirts look
because they go away from the car a little bit
and it makes the car feel like it has a wider stance
than it already does.
So I think these are very subtle
and very elegant looks on the side of the car.
And for the rear, yes, we just installed a big wing
and we did all of this carbon,
but don't forget in the last video,
we gave this car all of the hardware components
that it needs from turbos to intakes
to intercoolers, plenums, you name it,
we probably did it,
including Akrapovic link pipes and their titanium exhaust,
everything we need to get 700 plus horsepower
to make this car perform as good as it's starting to look.
Speaking of the looks, on the carbon,
we did this rear deck lid in dry carbon fiber.
We did the wing.
I wasn't sure if I was going to like the wing
and I really like it and I can't wait to actually run it.
Now, one of the things you may notice
from the footage earlier in this video,
we didn't really love the powder coating on this
from the factory.
So what we did is we stripped it all off
and we started over and now it looks absolutely incredible.
The duck bill came out great
as did the carbon fiber diffuser,
but with all of the carbon on the car,
what we did is we got it unfinished
and that way we can wrap it with Expel Stealth Wrap,
which is going to give it the exact same sheen as the car.
So whether it's the wing, the duck bill,
the front lip, the mirror cap,
everything is going to have the same exact sheen
to make sure that everything is super cohesive.
And don't forget about these titanium tips from Akrapovic.
Now we can't go through all of this work
to add all these performance parts,
all of this carbon fiber
and leave these stock wheels, tires, brakes and suspension.
So be sure to come back in the next video
where we tackle all of that and more.
