STEM Challenge Friction in a Pan Part 2

Terrific Physics
40 followers
1 Video View·Feb 5, 2026
Hi, I'm Jared with Fun Science Demos. In a previous video, we spun a marble around a
cake pan to look at the force of friction. Today, we're turning that into a STEM challenge,
and hopefully, we're going to be gathering some data. Now, to do this STEM challenge,
you can really do it with some basic materials. A metal cake pan, we put a little piece of tape
that's going to act as our starting mark, a marble, and this is the shooter marble,
the bigger kind work better than the smaller kind, and all we need is a little ruler,
plastic ruler with a groove down the center, and the goal of the challenge is simple. We want
to see if adding more energy to the marble changes how many times the marble spins around the pan.
Now, for this challenge, this ruler is going to be my ramp, and I'm going to use the markings
on my centimeters to determine where I launch the marble. Now, to make this work, I need to
make sure this ruler stays at a standard regular angle, so I'm going to use a roll of tape to set
it up, and then it allows me to hold this at the same exact angle every time I launch it, and now,
I just need to line my marble up at the different centimeter marks and count how many times the
marble goes around, keep track of that to see if adding energy changes how many times the marble
goes around the pan. Now, we've zoomed in, so you can get a better look at how many times our ball
is going to lap around our pan. We have also found that this metal ball fits the groove of our ruler
much better, so we're going to run our first test with the metal ball instead of the marble,
and we're going to start at five centimeters. So, here we go. Let's release the ball and see how
many times it spins around the pan. One, two, three, and a half. Three and a half. So, that metal ball
went around our pan three and a half times. Now, let's add more energy and see if the ball
is going to go around more times. So, I'm going to go from five up to ten. Let's count. One, two,
three, four, and a half. Ah, what do you know? Adding extra energy made the ball
go around the pan more times. Now, the nice thing about this ruler is we can just slide our ball to
different centimeters up our ruler, but the question is why does that add more energy?
Well, because as I move up the ruler, I'm actually raising the ball higher, and to get a better look
at that, we're going to change from a ruler ramp to a cardboard tube ramp. So, if we want to gather
data, we need to measure something. We're measuring not only how many times the marble is spinning
around the pan, but how high our ramp is. So, by switching the ruler from our ramp to now measuring
how tall our ramp is, we can collect more data. So, I have a cardboard paper towel tube clipped
to my ruler at 10 centimeters. I can now put it right at my starting line, put my marble in,
let it roll, and count how many times it goes around. Here we go. One, two, three, four, and
four and a half. Attaching the cardboard tube with a binder clip makes it really easy to now
slide my ramp up higher. I'm at 20 centimeters. I'm going to angle my ramp, and now I'm ready
to run another lap and see how many times my ball is going to go around my cake pan.
Let's let it spin. One, two, three, four, and almost three quarters. Now, you'll notice on
my ruler I can keep going higher, but if I go too high, I'm going to run out of ramp. So,
how can I make a longer ramp if I don't have a long cardboard tube? To do that, all you're
going to need is a piece of paper. So, if I want to use a piece of paper to make a tube, I'm going
to just use the ball to help me get started. I'm going to start in one corner. I'm going to pinch
the paper to the ball. I'm just going to start rolling that paper up at an angle. I'm not going
to put a ton of pressure because I want the ball to be able to roll through that tube, and I think
you can see, if I just adjust the angle, I can make my tube longer or shorter. There we go. My
tube is starting to form. Now, if it's too tight, I can simply unroll my tube by twisting it, and now
I just, I'm ready to tape, and I have my tube. So, I have a longer ramp set at 30 centimeters.
Tape to my pan. Let's make sure the tape is holding, and I'm ready to run another lap. Let's
see how we go. One, two, three, four, five, six, seven laps. There we go, and a half, and three quarters.
So, if we write down that data, I think we can prove that adding that extra energy allows that ball
to spin more times around the pan, but that leads us to a new stem challenge. I wonder how many times
we can get the ball to spin around the pan. What happens if we make our ramp extra long and take it
extra high? What happens if we drop the ball straight down and try to get it into the pan?
Let's see what happens. So, here I used two paper tubes. We put them in two different colors so you
can see that we joined them together, and I have to warn you that the longer you make your ramp
and the higher you go, that means you're putting more energy into that ball, and that more energy
can lead and will lead to problems. So, now I've extended my ramp to pretty high heights. Let's see
what happens when I try to release the ball. As you can see, the ball has so much energy it actually
leaps out of my pan. That's a problem. So, then what happens if I go straight up instead of out?
So, now I'm going to make it even steeper and higher. Release it. It's still bouncing out of my pan.
Those are all problems you're going to have to solve if you want to figure out what's the most
or maximum number of times you can get a ball to spin around a cake pan. If you want to learn more
about forces in motion, check out our YouTube channel, Fun Science Demos. Science is so cool,
especially when you get to race something. Three, two, one. One, two, three, four, five, six.
