Not all solar power is created equal. From rooftop panels to mirror fields in the desert, there are multiple ways we harness energy from the sun.
In this video, we break down the major types of solar technologies—thermal vs. photovoltaic (PV)—and the key differences between micro, distributed, and utility-scale solar systems. You’ll also learn how solar panels vary by material (monocrystalline, polycrystalline, and thin film) and why utility-scale PV dominates today’s solar landscape.
Watch our other video: • Solar Industry - Introduction
Key Sections: 00:12 - Two Paths: Thermal Solar vs. PV Solar 01:42 - End-Use Segments for PV Solar: Micro, Distributed & Utility-Scale 02:53 - Panel Types: Monocrystalline, Polycrystalline & Thin Film 04:23 - Why This Primer Focuses on Utility-Scale Projects
📚 This video is an excerpt from the Solar Power Primer, meticulously curated by the digital e-learning content provider, Primerli. The full module, comprising 5 bite-sized videos and quick quizzes, is tailored to empower professionals to understand the solar sector in under an hour.
What industry do you want to learn about next? Let us know in the comments.
Enjoyed this video? Subscribe here: / @primerli
✅ Connect with us on LinkedIn: / primerli
To know your way around the solar sector, it's important to know your way around the different
types of solar technology. There are a few different approaches to harnessing the sun's
energy. Some approaches use the sun as a heat source. Thermal solar. The first of these is
about as simple as it gets. Solar water heating. Sun heats water. Water heats building. This is
most common in high sun areas like southern Europe, Israel, and parts of China. Note this
is simply heating. No electricity is involved. But a second thermal approach takes heating even
further and does generate electricity. It uses angled mirrors called heliostats to direct sunlight
to a superheated single point. The concentrated light then heats the liquid to create steam.
The steam then drives a turbine to generate electrical power. This is called concentrated
solar power or CSP. While only one percent of the global installed solar power capacity is CSP,
there are several large-scale projects in operation, including the Ivanpah Solar Facility
in California. However, most believe that CSP is falling further and further behind in cost
competitiveness versus the leading approach PV solar. PV means photovoltaic. Photons turning
into electrical voltage. This is the groovy bit flipping phenomenon. The sun exciting electrons
and creating electricity directly. No turbines needed. PV solar is the main show in town,
accounting for the other 99% of solar power generation today. There are two ways to further
segment PV solar technologies. One is by the end use case. The first use case is all those little
solar-powered gadgets like camping gear. You might hear this called micro solar. This is a consumer
product space and not really what people mean when they say solar industry, but the underlying PV tech
is largely similar. The second segment is all those rooftop panels. The space of distributed solar.
Residential and commercial buildings and even small-scale industrial or community solar sites
fall here. These systems range from just one kilowatt, enough to power a few appliances,
to a full megawatt, enough to power 200 homes. The third segment is the utility-scale power plants,
aka solar farms. These are typically in the tens to one hundreds of megawatts,
powering mid-sized towns and beyond. Globally, distributed solar accounts for about 35%
of the total solar capacity, and utility-scale plants account for roughly 65%.
This varies, of course, by market. In the U.S., the split is closer to 20% and 80%.
The second lens for sub-segmenting PV tech is by the type of solar panel. Monocrystalline,
polycrystalline, or thin film. Mono is the premium version. It uses single intact silicon crystals.
These panels are pure black in appearance. They're the most expensive, but the most efficient.
They can convert 20-25% of the sun's energy to electricity. Monocrystalline panels are
often used when sunlight and or space are more limited, and efficiency is critical. Consequently,
they're the best choice for distributed solar, but many utility-scale plants will opt for
monocrystalline as well. Polycrystalline panels, on the other hand, are less expensive,
but less efficient. Roughly 15-20% efficient. These are made from many melted-together silicon
crystal fragments and have a distinctive blue appearance. For utility-scale projects with very
bright sun and lots of open space where efficiency is less critical, these can be the most cost
effective. They can be used for distributed panels, though less often. Thin film is the lowest cost,
least efficient option. Roughly 10-15% efficient, depending on the specific type. This, as it
sounds, is a film made of thin layers of semiconductors, different ones from silicon
crystals. Thin film is the tech of choice for microsolar products. It's possible, but less
common to find these on rooftops, and very rare to find them on solar farms. Distributed and
utility-scale solar are both serious solar industries, with many players participating
in the value chain. However, in the next few chapters, we're primarily focused on utility-scale
solar power plants. These are sizable capital projects. More work, investment,
and coordination is involved throughout the life cycle.