26 Medieval crossbow parts and assembly - full process

Crossbows Legacy
11 followers
2 Video Views·Jan 26, 2026
Okay guys, so here you can see all the parts of the crossbow. Pretty simple
thing actually. We're gonna start with the rolling pin
right here. It's made out of plywood which is not 100%
historically accurate. What they would use back in the day is
antler or bone maybe or some kind of a metal actually
like brass or bronze for heavier crossbows.
But I decided to use plywood because it's cheap
and easy to work with. I added this piece of steel right here
to make it more durable. This is the point where the trigger touches the
rolling pin. I hope you can see that. Okay, here we
have the trigger and here we have the rod.
It's made out of U. It's about 100 centimeters long actually
and as you can see on one end there are two grooves for the
string. I'm going to explain later where there
are two of them. The other end has just one.
Then of course we need the string for the prod. And last but not least
we have the body of the crossbow. It's made out of cherry.
It's pretty heavy actually and we can see the holes for the steel
pins. The rolling pin goes right here.
Here's the hole for it. Here's the hole for the trigger.
It goes right here. This is the place for the prod and this hole is meant for
strings that are used to hold the prod in place.
And actually there's one more groove right here.
It's not that common but it's very useful.
Again I'm gonna explain later how you use that.
It's about 80 centimeters long not taking the
stirrup in account. And then we have some wooden wedges
right here and some steel pins that are used to
hold the crossbow together. All right so that's all the parts. Now it's
time to put it all together. I'm gonna show you how the trigger
mechanism works because it's easier to explain
before you put it all together. The rolling pin or the nut
goes right here. In the Finnish crossbow of course
it's hidden inside but I'm gonna show it like this
so you can see how it works. Then we have the trigger
which goes in through here. But again before I do that I'm gonna show it to
you how the trigger works. So it goes inside
the steel pin goes through here right here.
Okay so this is the mechanism. Very easy. The later crossbows use
some springs and other gadgets but I don't use that. To keep it simple
all you need is the trigger and the rolling nut and
these two steel pins. So in this position of the trigger you
can see I can't really
roll the nut. It doesn't move. But if I set the trigger
right here. Yes you can see it rolls. This is how the mechanism works.
So as I said the rolling nut, the rolling pin goes inside.
Then we take this big piece of steel it goes right here. I'm gonna use a
hammer here. All right so the nut is in place. As you
can see it moves freely right now.
Next we're gonna take the trigger. The trigger goes in here
and I have to move it around a little bit.
Okay and it holds in place. So
in this position you can't move the rolling pin. Right here
it moves freely. But as you can see we have
one more steel pin. That's for the hole right here. Because
here the trigger goes too low. It's not very practical to run around
with crossbows like this. So we move it back.
Then I take the third and the last pin. Put it right here. Use the hammer again.
Okay and as you can see the trigger doesn't go that low.
This is just about right. And this is the mechanism really. You can't
move the rolling pin right now. Now you can.
So now it's time to attach the prod to the stock. It goes right here
like this. And as you can see it there's a lot of space inside.
So I use these wedges to hold the prod in place.
Okay that's the prod attached to the body of the crossbow. To the stock.
Now it's time to add the string to it. As you can see the crossbow has two
strings right now. The blue one which is just an accessory
string. I'm gonna remove that later. And then
the black one which is the actual string.
On one end you can see there's the actual string
to black one. And above it is the blue one which is going to be
removed. On the other end there's the blue one
and it's in the second groove. That's what the groove is for.
And the first one is free for the black string to get into.
So in order to string the crossbow I place my foot
in the stirrup. I grab the blue string and I bring it up.
I bring it all the way to the groove here. And as you can see now
I can just slide the black string right into the first
groove. It's still pretty loose but once I
remove the blue string it's gonna get the tension.
Okay and as you can see now the crossbow is
stringed and I can remove the blue string and the crossbow
is ready to shoot. With the crossbow finished
all you have to do is put your foot in the stirrup,
move the string up,
place the bolt and shoot it.
