Animated Brush Stroke Type Reveal in After Effects)

Motion graphics
5 followers
Jan 21, 2026
In this video, we're going to create a really natural looking paintbrush reveal on type in
After Effects. So we're going to start by creating a single brush stroke animation,
then use that to create a reveal on our type. And finally, go through some extra techniques
to add texture and additional elements to take it to the next level. I'm going to be using some
assets from this video's sponsor, Yellow Images. So first, a quick word about them. Yellow Images
is the number one marketplace for high quality premium mockups, creative fonts, 360 images,
and a creative store full of amazing graphic assets like brushes, presets, lettering,
illustrations, textures, UI kits, and more. You can also purchase a Yellow Ticket membership,
which can make your project almost 10 times cheaper than before. An average asset will
cost you only $1.50. You get three free items every month and a 30% discount for custom mockup
services. You get half price on the creative store and instant synchronization of your Dropbox and
Yellow Images account. For this project, I'm going to be using this brush stroke font, this set of
ink brushes for Photoshop, these PNGs of this melty head element, and this set of 2,350 paper
textures. This type of texture pack is my favorite kind of asset to buy because it would have taken
me so long to individually scan these all in myself. So a pack like this can save you lots
of time and therefore money. Without the Yellow Ticket, these would cost $63.99. But with a Yellow
Ticket, it's only $26. And if this was your first purchase of the month, three of these items would
be free and it would only cost $1.50. Follow the link in the description and use my code,
BEN30, to get 30% off on a three-month or annual Premium Membership Yellow Ticket and Annual
Team Membership Yellow Ticket. The coupon is limited and valid for one month only, starting
today. Now, on to the process. Now, the first thing we need to do is create our paint brush
stroke. And we're going to do that in Photoshop. I'm in a new document and we've imported those
ink brushes that we like. And let's just on a new layer, test quickly a few of them and see
what effects we get and see which one is going to make the most realistic brush stroke. Okay,
I think this one's going to give us the most variety. So let's delete everything on this layer
and start. So essentially what we're going to do is we're going to draw a paint stroke coming from
the left of the screen to the right. But we're not going to draw it all at once like that. We're
going to draw it in pieces so we can animate this later. So let's undo that and start from the
beginning. And on the very left, we are going to draw a very small brush stroke, the very smallest.
And now we are going to keep adding to this. And we're going to do that by duplicating this layer
with Command or Control J. And then continuing this brush stroke, only very slightly at first,
duplicating it again, adding a bit more. And then each time we duplicate the layer,
we're going to add a bit more, doing pretty small increments at the start. And then we're
going to get bigger towards the middle. Then as we get to the end, we're going to slow down.
I'm not drawing so much of the brush stroke at the end. There, I think we're done. Now if we
turn all of these layers off and turn them on one by one, we can see how our animation will look.
So now what we need to do, delete this background layer. So it's all on a transparent background
and just save this document as a PSD. All right, now we're in After Effects. We have one comp open
and it has a single text layer in it, which is what we are going to apply this effect to. I'm
using this typeface called Flat Brush because I think its brushiness will suit our effect really
well. But you can use this, of course, with any typeface you want or any other object for that
matter. So now let's import our brush stroke. Let's go over to File, Import or Command or Control I.
Let's find where we saved that PSD and we want to make sure we import it not as footage, but as a
composition retained layer sizes. And we do want it to create a composition, so make sure this is
checked. Then hit Import and hit OK. Let's drag that to our Precomps folder and open it up. We
turn on our transparency grid. We can see our brush here with all of our layers from Photoshop.
So let's select all of our layers from the bottom to the top. And if we hit Alt or Option and then
right square bracket, it will trim all of those layers to a single frame. Then if you right click,
choose Keyframe Assistant and Sequence Layers. Hit OK. It will put them all in a sequence,
so they are animated. Now let's drag our work area to the very end here and right click and
choose Trim Comp to Work Area. There. So now the comp is just the length of those layers and the
comp is a bit too big. So what we're going to do is select Region of Interest. We're going to draw
around our shape and then we're going to go up to Composition and Crop Comp to Region of Interest.
And that's just going to make it a little more manageable. So we've got our animated brushstroke,
let's apply that to our type. So in our type comp, we're going to drag in this brushstroke layer.
And at the moment it plays and then disappears. So what we need to do is right click,
choose Time and Freeze on Last Frame. So now once it's drawn on, it will stay there. Let's press U
on our keyboard to get rid of those keyframes because we don't need to see them. And what
we're going to do is we're going to use this comp to draw all of the strokes in our letters.
So let's rotate it so it's facing upward and place it near the start of the M. Scale it down
so it's around the same width as our letter. Now this is obviously way too long for this M. We want
this to be constrained within the bounds of this M. Let's turn on our transparency grid. You can
see there's nothing behind it. We don't want it really to poke outside. So we could use some masks
or we could use this text as an alpha matte for this brushstroke, but we're going to be doing
this a few times and that is going to end up with a lot of layers. So the best way to do this is to
put this text layer on top of our brushstroke layer and for its blending mode choose Stencil
Alpha. So what that does is constrain everything beneath it to the bounds of this layer. So if we
turn our transparency grid on and move our brushstroke around, you can see that it's only
visible within the letters M-E-L-T. Let's turn our background back on and let's play this animation
and see how it looks. There we've got our first half of our M drawn on. Let's make this easier.
I'm going to move the angle point down to the very beginning of this layer so we don't need
to keep moving its position. Then we're going to duplicate it again with Command or Control D.
I'm going to move it up to the top here, press R to bring up rotation and rotate it until it's
in line here. I know it's a bit tricky to see because we don't have our text as a guide,
so I'm going to duplicate our text layer, change the blending mode to normal and then just turn
the transparency down pretty low. So we have a faint idea of where our text is going to go.
Okay, so now if we play it back, both our brushes are drawing on at the same time. So we need to
offset the second brush stroke. So let's drag it across our timeline and let's find the point
where the first brush stroke ends or completes drawing that part of the letter and then our
next one can continue and you can tweak these to your own taste. Now a lot of this process
will be continuing to do that and it honestly doesn't take that much time. I won't even speed
this one up. Duplicate, drag to the bottom, rotate it up, adjust its position, done. Let's do it once
more for the stroke down, there. Now for the next line of the E, I'm going to duplicate this brush
stroke but I'm also going to change its color to something like yellow so it's a bit easier to
differentiate at a glance in our timeline. So let's line this one up but then when we go to do our
next brush stroke, this short horizontal line of the E, our stroke is now much too long and it's
going into either the next letters or the letters beforehand and we don't want that. So what we're
to do is line it up to roughly the end of this brush stroke, select our rectangle tool and draw a
mask over that area. Let's do that for the other strokes on our E and for the L we can just copy
the first and last stroke of the E and move them over to change their color too. Now because we
don't want it to look identical to this E, we can move our strokes around a bit like so. Now about
now you're probably thinking that I've been very sneaky by choosing a word that has no curved
letters. There's no C's or O's or any other such round shapes in here and well you'd be right for
thinking that but I will show you how to work with a round letter. So let's change this T in MELT to
a D and let's change that on both type layers there. So the downward stroke will be the same
but when we get to our rounded section, I'm going to place it horizontally and then what we could do
is select our puppet pin tool, pin the start and then a couple of pins along the way and just move
them into position along the axis of the D. Now you might want to use two comps for this or you
can try your luck by stretching it even further. Now it might look a bit too warped for us but
really without the context of knowing it's the same brush, I don't think you're going to notice
when you take a step back and see the animation in isolation and an alternative method to get a
curved line is to draw another curved paint stroke in Photoshop. The same process that we did for
this one just you know draw it curvy. Now with this technique you've got a lot of room to adjust all
these brush strokes so if you play it back and it's playing back too fast you can always space
out these strokes even more or if you want more overlap on each stroke you can do that too. Now
I'm pretty happy with that so we can delete this top text layer and I'm going to show you some more
techniques to take it to the next level by making it even more textured and more painterly. So let's
select all of these brush layers, duplicate them all with CTRL or CMD D and bring them on top of
the layer stack above this type layer and at the moment it looks like a massive mess but it will
look better soon I assure you. The next thing we're going to do is offset these by about two frames each
give or take and let's hide them all for now because they are getting in the way and let's
just turn on the first layer to see what we're working with. So this first brush layer is now
no longer being constrained to the shapes of our type to the shapes of our M but it is going too
far outside of where we want it to and what I want to happen is to make it look like a second brush
stroke is being drawn on top of this one which is why we've delayed it but we do need to constrain
it a bit more so I'm going to move this stroke around just so there's a bit poking out on the
left and a bit at the top. Then if we grab our pen tool and just draw a mask around those edges
and let's tweak the mask so we don't want any harsh lines where it looks very obvious that
we've just got a straight mask drawn. Maybe we try to rotate it a bit and slide it over so that's
looking a bit more natural. There I think that looks good. So now what's happening when we play
our animation is that our first stroke gets drawn and then the second stroke is now being drawn
on top and that just gives a bit more variety to the lines outside of our text and that delayed
motion just gives a bit more animation a bit more magic so it just doesn't look as static
there's just a bit more depth to it. Now you don't have to add these for every one of these strokes
but if you do want it really doesn't take that much time it's just a case of turning that brush
on finding an area like underneath here that we want to add a bit more texture to grabbing a mask
and drawing over the top. Adding an extra one of those to each of these strokes maybe took
three or four minutes for this whole word so it might be worth spending that time depending on
how detailed you need your project to be. So now that we've got our text all brush stroke painted
on and it is in its own comp it has a transparent background if we turn our transparency off so now
we can do anything with it. So let's place that melt type comp in a new comp let's create a black
solid as the background let's name it background because we always label our layers let's add a
fill effect to our type so we can color it anything we want let's color it white as if it's
paint drawn on a black surface and now i'm going to show you another technique for creating a
looping texture which i think is going to really add some depth to this. So again let's go over to
file import and we are going to find where we save those paper textures that we downloaded from
yellow images earlier. Now we've got quite a few white paper textures here so i'm going to select
the first white paper texture called white paper one and this gives me the option to import as a
sequence and that is because this file is surrounded by files that have the same name
except they have a different number and that's incrementing so then After Effects can read that
as frames in an animation. Now we don't need to create a composition so let's untick that and
then hit import and if we drag this image sequence on top of our type we can see we've got an
animation all of those pieces of paper. Now at the moment it doesn't loop and it goes way too fast
so let's right click go to interpret footage main and we want to assume the frame rate is much lower
than 24. Let's go to 6 frames per second and we want its loop let's go 50 times let's be generous
and hit ok. Now we can just extend that out and now we've got our paper looping back at a more
reasonable speed. So let's zoom out we can see this paper is massive so let's scale it down
and let's add the curves effect to make some adjustments to it. Let's increase the contrast
like this so we get some more darker areas in here and we also want to invert it as well
there and then change the blending mode from normal to screen and now we've got some added
texture over the top of our animation. We can also use that same technique of using an image sequence
to import the other element we downloaded from yellow images which is this melting head object.
So I'm going to import these scale that down too and now we have a rotating head that we can play
with. I'm going to go to time time stretch and slow it down a fair bit and now I've got this as
a separate animated element that we could use to maybe make a cool background like all the hip
young kids are doing today or really anything we like with it. Just like our paintbrush we made we
made this one element in about two minutes in Photoshop and then using some different techniques
we can use that to build out really textured paintedly brushed on type effect. With a few
more layers and some extra tweaking it can look something like this. Thanks again to yellow images
for sponsoring this video. Having access to a library of assets like this that the yellow
ticket gives can save you a massive amount of time and money when you need to create your projects.
Again follow the link in the description and use my code BEN30 to get a 30% discount on a yellow
ticket. Thanks for watching. If you'd like to learn animation and motion design techniques I've got a
playlist of some of the best tutorials on this channel for you to take a look at. I'll see you in the next one.
