I'm back with part 2 of "Baxter's Trading Post," a new scene on the On30 Thunder mesa layout that represent the town's rough-hewn frontier beginnings. In this installment, I add real dirt ground cover, and then show my step by step method for making Ponderosa Pine trees. Then it's time to add final details to the scene and light the structures with a simple 9V DC power system. This new area has a real "Big Thunder Mt" vibe and was a total blast to build!
Become a Thunder Mesa Member on Patreon for early access, exclusive content, and members only parts and details from the builds! https://patreon.com/thundermesa/
All music courtesy YouTube Audio Library, Creative Commons License.
Howdy folks, welcome to Thunder Mesa Trains. My name is Dave and today I want to pick up right
where we left off last time working on Baxter's Trading Post. It's an all-new scene for the ON30
Thunder Mesa Mining Company layout. In the last installment I built this new section of canyon
scenery to act as a home for these favorite old structures from an earlier version of the layout
and today I want to continue working those structures into the scene adding ground cover
and details and other things until it looks like they've always been there. That's a lot of ground
to cover today, no pun intended, so let's jump right in and get started. I think I want to start
right here at the front of the scene. I have this loading dock which I built many years ago. It used
to be located over in front of the depot but it kind of blocked the view of that so I think it's
going to work better over here and in order to work it into the scene I need to add a little bit
more cork here to create a level surface for this to sit on. So I need to cut a small piece of this
quarter inch cork sheet to fit this sort of odd shape right here. I have an idea how to do that.
I'm going to take a piece of paper from my sketchbook and lay it on top of that space
and just kind of run my fingernail here along the edge of the cork that's there
and then again over here where it meets the edge of the cliff. It's hard to see but I'm
going to go over it now in pencil and that will give me a template that should fit this shape
pretty well. So now I've cut it out I'm going to lay it back on the scene to make sure it fits.
Yeah that's pretty good and now I can put this on top of a piece of cork and cut a shape to fit
right there. I don't have a scrap of cork here that's quite big enough. I need to cut this out
of two pieces. That's no biggie. That should work. I'll use some of this Titebond quick and thick
to glue this into place. It's definitely thick. See how quick it is. Now I can put the
loading dock in place. Get it in just the right spot where I want it, making sure that
the equipment is going to clear. Now I want to mark that where each of the legs
comes down because I'm going to remove it again. Build a small bit of rock work to go right here.
Not thrilled with the way this looks. I think I can do a little bit better. I'm going to have
a little piece of rock work in between here and the loading dock. Kind of tie all this together.
This is a hunk of expanded urethane foam that's left over from an earlier project
and it's very different characteristics to that pink XPF that I used to build all of this scenery.
But I wanted to use it here because I wanted to have a little bit more detailed rock work
and this stuff carves a little bit better. You can also get this stuff. It comes in four by
eight sheets, usually two inches thick at your local home center. You can tell it's the stuff
that has the foil on one side and plastic on the other and you have to peel that off
to get to the foam, which is rather labor intensive and I'm happy I don't have to do that
today. So now I'm going to take some measurements and make sure this will fit back here between
this rock work and the new loading dock. I can use the same paper template to mark this
and cut this out with the razor saw. This stuff is really easy to cut and shape. Unfortunately,
it makes a huge mess with a lot of foam dust. So keep the shop bag handy. Now I have a blank that
will fit in the seam and I've left this part sticking out because I wanted to overhang
the dock just a little bit. Now I can start carving this to look like rock and this stuff is
super, super easy to carve. It's almost like floral foam but not quite that soft. In fact,
you can carve it with just about anything. Start with a utility knife. You can even use a hard
lead pencil to carve it. But my favorite tool for this kind of carving is just my good old
hobby knife. Just go in and cut and break pieces off. Use a little sandpaper to smooth and delineate
different chunks of rock. You can use a wire brush too but you've got to use it very sparingly
because mostly that's just going to take material away. It does add a little bit of texture though.
Now I'll go ahead and glue another small chunk on top of this. I want the rocks to come up a little
bit higher. I'll put a couple of toothpicks in here to hold that in place where I want it. Now
I can carve the rest of this in place. I want these pieces to be kind of rounded off on the
tops from erosion so I'll mostly use my sanding block here. Now that is going to fit right back
in here like that. Now I can get some paint on this to make it match the rest of the rockwork.
As usual, start with the scenic base color and that'll go a long way towards sealing this foam
and cutting down on all of that foam dust everywhere. As soon as these pieces are dry,
I can go ahead and glue them in place on the layout and finish the rest of the painting there.
Now while I wait for that base coat on the rocks to dry, I can go ahead and get some other painting
done here. I want to get a coat of this dark brown camo on a lot of this track around the Y
because it's just going to get harder and harder to access as I go so might as well do it now.
And this will go a long way towards getting the track work finished in this area.
Now just as soon as this is dry to the touch, I want to come back and clean the paint off the
tops of the rails using some odorless mineral spirits and my favorite track cleaner which is
a wine cork with a piece of t-shirt wrapped around it. Of course you want to make sure you change
that little piece of cotton cloth frequently because when it gets to looking like this all
you're really doing is just pushing that paint around. Okay now these pieces are dry enough
to glue into place. Make sure this still fits. Now I'm not going to go in depth on the whole
scenic painting again because I just did that in the last video but you know the usual next step is
to get all these rocks with a dark wash and so I will just summarize the technique here.
The base coat I put on that scenic base color is basically a raw sienna and now I go back and
build up the subsequent layers of color each getting a little bit lighter than the last
just kind of dry brushing and hitting the the tops of the rocky texture. The lighter color is a
mixture of that scenic base with an acrylic paint called Unbleached Titanium which is just a very
very light tan almost an ivory. What adding this little section of rock work here does
is it visually separates the cabin back here in the saloon from from stuff in the foreground.
It actually pushes them back a little bit gives the illusion that they're a little bit further
away than they actually are and the end result is to make the town look and feel
a little bit more expansive. While I'm over here with the paint I'll also do a little dry brushing
these ties on this siding using some country gray and a little bit of khaki just to make it look
like they've been out there bleaching in the sun for a long time even though most of the ties over
here are actually going to be buried in the dirt. Now I want to start building a section of
retaining wall right here along this edge of foam and I'm going to build it right in place.
Some of it's going to be new construction some of it is you know bits and bobs I salvaged
from the old layout like these steps right here put those in place first. I want this first section
here by the stairs to be a log retaining wall I've got a whole bunch of dowels that I salvaged
from the old layout that have been you know weathered and stained and they're just ready to go
so I'm going to cut those to size and drop them in there. I always like to reuse little bits of old
projects recycle carry that over to the other side of the steps as well that's about as far as we're
going today. I believe that some of these logs were actually part of Thunder Mesa Town in the past
so it seems fitting that they get reused here again. I want to add some upright posts I can
tell these came from Thunder Mesa Town because they've already got nut bolt washer castings in
build these up one more layer about four feet high and that is why I never throw stuff like
this away you never know when it might come in handy and now I want to start building the
board sidewalk that's going to connect these two sides of town. I'm going to build that right in
I'll start here by laying down a couple of six by eight joists for the planks to sit on top of
I'm going to bring the rear one right up to the edge right up to the front of the assay office
that'll give me the width I need which is about about five scale feet I'll just start down at
this end adding the planks and these are cut from some coffee stir sticks and I'll show you
how I prep those. These are the coffee stir sticks I like to use they scale out to be about 12 by
threes more or less and cut them to size on my chopper tool here then I'll enhance the grain
with a fine tooth razor saw and then to stain these I'm using some of these rejuvenate exact
match wood furniture and floor repair markers I just did a short video on these I'm excited about
these as a modeling tool they really speed things up they turn you know what could be a
pretty tedious job into something that is fairly quick and easy just like that
that's ready to glue down just takes a minute I have another small structure I want to add right
here and this is just a little shack I built in about two hours yesterday because I needed
something to go between the assay office and the saloon and I thought you know a bathhouse would
probably work pretty good right there bathhouse slash barber shop but you know I think if you
went in there for a shave and a haircut you'd be taking your life in your hands the sign says hot
baths five cents clean water ten cents that's that's actually is based on something I saw
out in California at one of the old gold rush towns up in the hills there pretty funny
and that is the last board at least for this section I had to go a little bit creative right
here and angle these boards cut all these at an angle so that would properly line up with the
saloon kind of coming around the corner there here I've got a couple of different shades of real
Arizona sand because now it's time to start adding ground cover to the scene I'm going to start up
here with the darker red color which is a good match for all the foam scenery now I always like
to use real dirt and sand and rocks for ground cover because you know nothing looks better than
the real thing well I'm using this all around at basically at the base of the cliffs and then down
here in the high traffic areas where the horses and people and wagons going by I'm going to use a
lighter shape then I'll come back on top of the finer sand with some larger rocks and pebbles
this is all crushed sandstone like those have fallen down from the from the cliffs and now I'll
switch to the lighter colored sand or the roads and high traffic areas down here on the flat I do
sift my dirt but I don't do a very good job so there's always chunks in there but you know I
think that just adds to the to the character keep a soft brush here handy to get the dirt and sand
off of the places where I don't want it as for this spur track I want the the ties to be buried
in the dirt and just the rail heads sticking out need to take care when you do this to make sure
the trains are still going to operate so first I want to bury it and then I want to get the sand
off the tops of the rails and out of the flange ways and here I can use my NMRA standards gauge
HO scale and use this to make sure the flange ways are clear and then as an extra precaution
I'm going to take one of my older Bachman cars which have the larger flanges on the wheels
and run that back and forth on here to make sure it doesn't get hung up anywhere before
I glue all this down put the loading dock back into place snug it down there into the dirt
and the glue I use for the ground cover should be more than enough to hold that in place
here and run it up onto the ramp now I'll add some wagon wheel ruts
nothing works better than a actual wagon wheel now I can wet all this down with a spray bottle
filled with wet water that water is just regular water with a drop or two of liquid detergent in
it to break the surface tension now we drizzle on some diluted white glue the old Elmer's diluted
three to one with water three parts water to one part glue make sure I get good coverage
on everything here make sure I get back under here really good okay now I let all that glue
dry overnight and now I want to do something I've never done before on the Thunder Mesa layout
model some big pine trees since both the Big Thunder Saloon and the Trading Post are rough
hewn log structures it stands to reason that there must be some big pine trees growing around
here somewhere and I can already hear some of you out there saying what pine trees in the desert
absolutely but these aren't just any pine trees they're a drought tolerant species that grows
all over the western United States called ponderosa pine and you can find them here
in the southwest growing at elevations between about 4,000 and 8,000 feet above sea level with
mature ponderosa pines often towering well above 100 feet but this tree I just finished building
here is only a little over 50 feet tall at scale if I was to build them you know full size 100 feet
tall they would end up towering over the trains and all the rest of the scenery so just as I'm
always trying to model specific geology rather than you know generic rocks here I'm modeling a
specific kind of pine tree ponderosas have a kind of a cinnamon colored bark it's very distinctive
and a rounded crown as opposed to the cones that you see on fir trees and other kinds of pines
now building trees in the way that I'm about to show you is very much a craftsman method I build
them one or two at a time there's nothing quick and easy about it it's a very labor intensive and
time consuming process so if you're looking for a quick and easy way to make pine trees
I'm sure there are 100 other videos out there on YouTube that can show you those
this is how to make a very realistic or as I prefer believable foreground trees like this
and it does take a minute so not fast or easy but you know if you follow these techniques and use
these materials you can end up with some pretty good looking trees now the first thing to talk
about on these trees is the foliage the pine needles if you will and you know I've seen a lot
of different things used I've seen static grass used and ground foam and everything else I actually
like this super turf which comes from Scenic Express and I'll show you why it is a type of
ground foam and it's a dark evergreen color but rather than the small closed cell foam this is
looks like it was cut out or ground up from some open cell foam so it has this sort of
needly texture to it which is a great starting point unfortunately it's a little bit too dark
and a little bit too blue so my first step is to actually paint this stuff I start by spraying a
piece of cardboard like this with some super 77 spray adhesive just to make it tacky and then I
want to lay out a more or less even layer of this super turf then I've got some flat rust-oleum
in a kind of a pine green color the idea here is that I'm just hitting one side of these little
clumps of ground foam so they'll be lighter on the top and a little bit darker on the bottom
now while I wait for that paint to dry I can start working on the trunks
and these are from a package of dowels in different diameters that I picked up at my
local craft store they're 12 inches long I believe yeah 48 feet at scale and my first step is to
taper one of the ends using a utility knife like this just whittling it down until it comes to a
point and you can sand that smoother if you like but that's really not critical I always like to
leave a little flat spot at the end of the point because we're going to be drilling down into that
in a later step so I want to have someplace to drill into now I want to cut these to length
this one's going to be up on top of the mesa so I'm going to make it pretty short only about
six inches I think it's important to have variety in the heights of the trees
now I want this to be securely clamped down because I'm going to drill right into the end of
it here and that's for a finishing nail I'm going to put right in the end there
snip the heads off now I've got something to hold on to and to plant the trees with
now I want to add some bark texture to these and that is achieved with some acrylic modeling paste
you can pick this up online or art supply stores very handy to have a jar around I use it for all
kinds of stuff pine trees like this to uh stucco walls on buildings works great and I want to kind
of stipple it on like this because I'm trying to create a raised texture start at the top
my way all the way down to the bottom and when that modeling paste is dry the texture should
look something like that for the branches on my trees I'm using some dried caspia and this is
something you can pick up at floral supplies Hobby Lobby might carry it in the floral department
you can order it online from scenic express it has a very fine branch texture which makes it ideal
for scale modeling but before I can install the branches on here I need to paint everything
I need to get a dark base coat on the tree trunks and on the caspia branches I want to use
and for that I'll be using some rust-oleum dark brown camo one of my favorite colors
once that dark brown base color is dry I want to come back and dry brush the trunks
with some of this raw sienna and a little bit of this unbleached titanium
to replicate the cinnamon colored bark that these trees have and yes these are the same
basic colors that I use on my red rock scenery and that means everything is going to harmonize
and you know just go together very nicely and then sometimes I'll go back and add a dark wash
over the top of that and that really makes the bark texture pop and now we come to the most
labor-intensive and time-consuming part of building these trees and that's adding the
caspia branches to the trunk I like to start up here at the top at the crown remember I left that
flat up there because I want to drill a hole straight down in there don't have to go in there
too far maybe a sixteenth of an inch I'm going to pick a small branch that's going to make a good
looking crown remember the ponderosas have a more rounded crown and to glue these on I like to use
a thick PVA like Eileen's tacky glue with my tweezers put the end in the glue and stick that
end down into the hole then coming down about a little more than a half an inch I start drilling
holes for the for the next series of branches these kind of pines grow in what's basically
kind of a hub and spoke pattern so drill a hole glue in a branch rotate it about a quarter of the
way around and then I'll drill another hole I'll just keep going around up here towards the top
I'm keeping the branches kind of short and of course they'll get longer as we work our way down
towards the bottom of the tree then another quarter turn we'll put another branch in right about here
and if you can kind of turn the caspia branches so they're they're kind of slanting upwards
and come down about an inch and do the same thing again quarter turn drill a hole like I said
not exactly quick or easy and then down about an inch and we start again on the next course
this caspia can be extremely delicate and fragile when I first got this batch here I
soaked all of it in some diluted matte medium and that seems to strengthen it up a little bit
but you still got to take a lot of care as you continue down the trunk some of the branches
will be fat some will be skinny some will be short some will be long some will be broken
but all of that variation is just going to add to the realism of the tree how far down you want to
continue to place branches is really up to you and should depend on where the tree is going to be
and of course the age of the tree older trees tend to be more bare down towards the bottom of
the trunk whereas younger trees will have branches that go much further down now at this point we've
got a couple of pretty nice looking dead trees let's see if we can't bring them to life and to
make that happen the first thing is to spray the heck out of them with some of this super 77
spray adhesive I want to make sure all of these branches are covered in it and you think you
sprayed on too much that's probably just enough now I've gathered up all of that ground foam we
painted and I'm just going to sprinkle it over the top and let it stick where it sticks and fall off
where it doesn't one thing you don't want to do is try to you know press it on because then you're
then you're going to break those branches give that a little shake and that tree is about ready
to plant on the layout plant the shorter one up here on top of the mesa I'll plant this one
right over here by the tunnel okay now I can finish up the scene with a little more ground
cover some signs and a few more details I'm just finishing up gluing down all of the ground cover
here in front of the cabin exactly the same technique that I used before so I didn't think
I needed to show you that again and I've already begun adding details to the loading dock I've got
some crates and barrels and you know a hand truck and things like that and these are all things that
have been recycled from the previous version of the Thunder Mesa layout which is nice because I
didn't have to repaint any of them they were all just ready to go and I've also put in some steps
here leading from the loading dock up to the trading post so the details I've been itching to
add up here is the doghouse this used to be over in Hanging Rock and it says Indiana on it's based
on the doghouse that you can see from the Disneyland Railroad over by Big Thunder at least
you used to be able to see it over there I'm not sure if you still can and if you're wondering where
the dog is well he's over at the depot there's already one barrel up on the porch then I'd add
another one probably a good idea to have a barrel and a wash tub over here by the bath house
those wash tubs come from Weissman Model Services white metal casting I've always liked this
doctor figure from Knuckle Duster Miniatures looks like he's on his way to an important appointment
this old timer is supposed to be playing the corn jug I believe he's from Woodland Scenics
but you know he could just as easily be nipping at it every town needs a town drunk this guy used
to be over in Calico but since I moved the date for Calico up into the 1920s he really doesn't
fit over there anymore so he's gonna live over here by the saloon then there's Mr. Van Cleef
tough customer I think a place like this should definitely have a rocking chair on the porch
that's a 3D print that my friend Bob Kerner sent to me thanks Bob even though we've got
some pine trees growing here it's still the desert so I've added some prickly pear cactus
over here and these are injection molded plastic from Pegasus Scale Models some of the best prickly
pear cactus I've ever seen this intricate looking contraption is actually a coffee grinder
and this uh this is a little white metal kit offered by Berkshire Valley Models
and we'll put that right up on the porch and this old codger is actually a scratch built figure
God I made him long before I started the Thunder Mesa layout and he's
been with me ever since now he's got a home at Baxter's Trading Post and I should mention that
the the mother and the baby there uh those are from Knuckle Buster Miniatures and they've been
on that front porch there since uh since I built the cabin of course one of the best ways to
transform this ordinary cabin into a frontier trading post is with some signs
made this sign with my usual method of using downloaded CG wood textures and then adding
text and weathering in Adobe Photoshop it's then printed out onto some high quality matte photo
paper and glued down to some illustration board cut that out and then paint the backs and the
edges of the illustration board to look like wood and of course the sign says Baxter's Trading Post
established 1847 T.W. Baxter proprietor of course we're naming this for the imagineer Tony Baxter
who was born in 1947 and I've got a few signs advertising the various goods here for sale
or trade they're all made pretty much the same way as the big sign now both of these structures
have LED lighting inside so get that hooked up and I think we'll be done with this project for now
this little black box is a 9 volt DC transformer or adapter often affectionately known as a wall
wart because it plugs into your wall socket and takes that 120 house current and steps it down to
something that's safe to use for our hobby needs in this case 9 volts DC and 9 volts just happens
to be what all of the LEDs and sound effects on the Thunder Mesa layout run on this area right
here in front of the river in Thunder Mesa town is where the controls for the entire layout are going
to be located eventually there'll be a cover here to hide all of the different boards and electronics
that are under there and one of those things is going to be this this is a little electrical
distribution bus which is designed for low voltage systems it comes from
EVE model you can pick these up online on Amazon I'll provide a link for that and I like to use
these to distribute power to all the lighting effects and sound effects and things like that
from that DC transformer that I just showed you and so I want to mount this in a convenient location
these come with a couple little nylon bushings to keep this
back of the board off of the wood which is a handy feature and now I want to drill some larger
quarter inch holes to run all the wires through now I've run the negative wire from the DC transformer
through this hole and put that in this input input B right there I'll take that other lead
and attach it here to a single pole single throw on off switch and I'll use a short
piece of scrap wire to go from the switch to the bus I'll screw that one into terminal A
and I'll put this in place here temporarily with a small square of scotch mounting tape so now I'll
plug in the wall wart and we'll put an LED in here to test this out under power before I hook
the structures up to it so this is a pre-wired three millimeter LED it's just like the ones that
are inside the structures so when I flip the switch on it should illuminate if I wired everything
upright success all right now I can go ahead and run wires from the structures over to the bus
now I've ganged the wires from the saloon and the trading post together to minimize the wiring
clutter underneath the layout and the negative wire goes in there and the positive wire go here
in the top terminal it's important to keep the positive and negative straight either by labeling
or color coding because on LEDs it does matter now flip the switch and we should have some lights
and the trading post and the big thunder saloon for the first time in a long time oh I love it
when a plan comes together now you knew that wasn't really going to be the last thing right
I also picked up these pine trees on eBay from a fella named Dan in Ohio there's some really
nice looking trees and I thought I'd use them to you know fill in around and behind the ponderosas
just a couple more small things I want to do here at the cabin got this 3d printed deer skull
pretty good up here got a sign and I've got a bighorn sheep skull over on this side and finally
really this time I'm going to take some colored chalk and use it to lighten up the ground cover
here to create a path going from the cabin down to the saloon there are probably a hundred other
little projects like that that I could get into like you know adding leaf litter under the trees
and pine needles on the roofs of the buildings but all of that is going to have to wait for
another day because the clock on the wall is telling me it is time to wrap this one up
thank you all so much for watching me today I'll be back next week with another video
until then you can also follow over on patreon that's patreon.com slash thundermesa either for
free or as a paid member and you can follow me on instagram as well that's at thunder.mesa
and check out the resources available to you on the thundermesa studio website at thundermesa.studio
as always a great big thank you to our patreon members who help to make these projects and these
videos possible until next time keep moving forward my friends adios for now