How We Repair Damaged Floors in Our Mobile Homes...

My Brother Donnie
257 followers
4 Video Views·Jan 16, 2026
We bought an old mobile home from 1988, with damaged floors throughout. In this video we show how to repair them, this is a problem in all manufactured homes! The problem is always caused by water, so it's usually worse in the kitchen and the bathrooms, but also near windows if they had window unit air conditioners installed. In this house, they had a roll-around portable air conditioner that caused some damage.
Donnie I like the living room. It needs some work.
The hole in the floor. There's a hole in the floor. That was already there before they moved it.
The main thing about this folks that you can't tell is that it doesn't stink.
Almost every time you get a mobile home it smells. This one doesn't smell. It kind of
smells like cleaning fluid. So they were they were cleaning something. Cleaning fluid. Cleaning
liquid. They were cleaning something. Detergent. Detergent. There you go. Yeah it kind of smells
like laundry detergent. So there's a big mess in the floor. Maybe that'd be the first thing we do
but obviously this carpet's going to have to all go and there is a big there's some kind of hole
in the floor right here in the middle where they were using an AC unit we think. We think they had
it mounted in that window like the the vent going out and it was like one of those roll around AC
units but the problem is it was leaking all over the floor. So we think that's what happened there.
So I think the first thing we're going to do is clean all this stuff up. We're going to have to
do a bunch of drywall work though because a bunch of stuff which has not done that good or it cracked
when they moved it. Yeah that's what happens when you take the strips down. Yeah Donnie loves those
strips. Yeah you could just put the strips up and it would fix your problems Donnie. Yep.
Might put the strips back up. Put the strips up and then you don't have to worry about finishing
the drywall. You don't have to paint it. Yep and that's a good point. Yeah that would work.
The ceiling is actually nice in here. It's got this old uh fan here. I think that might
be savable Donnie. The blades are straight. What in the world? It's a hacked in back.
Who knows? Yep I don't say. But uh yeah this thing actually is not in bad shape. So we're
going to clean it up a little bit. Get all this stuff out of the floor. Get rid of that freaking
lamp. We don't put furniture with them you know folks. No. Let me show you this little nook over
here. This thing's cool. You put your tube tv right there. Now you could put a flat screen in
there but they're no longer four three so it would be kind of small. You could put your flat screen
up there now I guess. But anyway um look they had a little built-in electrical thing. Somebody
obviously has added this but that's where they that's where they put their hi-fi phono. What
Yep that's probably where they did it. All right so we're gonna clean up this room first and get
started on it and then uh we'll see what it looks like once we get everything off the floor. Okay
y'all we're gonna uh we're gonna start pulling this carpet up and see how bad that hole is there.
That's what we're going after. See what we can do with it and uh try them. Try them.
Get right here and see if you can just scissor right on down through the
through it. We forgot our utility knife but our tin snips might actually be saving us.
So we're gonna cut it out and uh see what we can come up with. Looks like he's gonna rip it
and see uh see what we can do here.
And we will get back to you when we figure out how we're gonna get this done. But
this is what we're working with.
He's gonna just rip it apart. He's a madman. Madman on a mission.
But anyway that's uh that's what we're doing here this morning. We're gonna see if we can
get it tore out of here. They're complaining about uh cold air. Well
there's no return. What they did they put a bag over this to try to keep the air out.
I don't know why they wouldn't have. If it had been me I'd stuffed it full of insulation or
something to try to keep it out. But uh they didn't even try. So I'll have to talk to my uh
air conditioner man and see if we want to use this or if we want to do that over there. I think
we're probably going to do the way I normally do it so we'll see. But uh here's that hole.
Looks like they went from three quarter inch plywood to this whatever the hell this ----'s
called uh fiber board or whatever you want to call it and it just broke out on them.
If they were to put a block there like I do it uh it wouldn't have broke. Press board yeah
whatever it's called it's junk. You don't ever use that stuff. They always use it for some reason
but we're pulling the carpet and uh see if we can get it all rolled up
throw it out. Step one is tear it all to hell. Step two is to fix it afterwards. So
it'd be uh anxious to see what this uh plywood looks like down here or particle board whatever
you call it. Anywhere it's black you know that's uh that's where you're gonna fall through. So
that's what we're doing. We're gonna try to get these tack strips up get all this stuff up.
We don't ever put carpet in so we'll take this stuff up and uh put uh put something else in it.
So we'll uh we'll let you see it when we get it all cleaned up here. We'll get it all
all taken apart and uh see what we can get up to. Okay y'all we're pulling up the tack strips in it
trying to break them things up. We uh we decided this was three quarter inch.
Somebody has put uh three quarter inch marine over there. It's pressure treated. They also put
some there. Um there's a manufacturer date. You can tell what year it is. It is an 88 by uh
huh. It says mobile home depth. I ain't never seen it say that before. Class. Class A2.
L25. Whatever all that means. But yeah anyway we uh we got it up. It ain't bad. I mean
that right there is probably a coffee stain. Ain't bad at all. So we're trying to get the
tack strips up. Trying to get them all up and out. I don't know what I'm gonna do with my
air conditioner vent yet. I might patch that off and uh go away with it. I don't know yet.
We'll have to see. I'll have to let you know on that one. A smart place for that to be would
be in the bottom of that box. But uh yeah. Hey y'all this is the problem. See that going down?
That's three quarter inch plywood. You step on it it goes way down. They didn't put any
blocking under it. It's the same thing here. It goes down. It's not as bad as what that one is
but I'm gonna pull. I'm gonna pull this piece up and we're gonna cut a new piece for this.
This whole section here and we're gonna pencil. We're gonna frame it all out and I'll show you
all that here in a minute. We'll take these two pieces up and replace that whole section there
and then we'll have a little piece we'll have to put in over here but I'm gonna do this piece first
okay and then we'll see where we get. That's the first thing I got to do.
Okay y'all sit there and watch. He's gonna be working on this section.
They did it there. They did it wrong.
This you know partially they did that. They scabbed it on there.
You don't see the hammer that you had earlier?
Don't forget to take it out.
Okay.
I think we got them keys for it now. Yeah see like right there. You're gonna have to fix that spot.
I noticed it was crooked.
Good place.
They've already over cut back there.
I'll let this guy down right there.
I'd say my size of the line I believe.
You said you used batteries?
Okay y'all what is going on here is uh you can kind of see it better there. What's going on?
This piece was broke right through here around the way out to over here.
The reason we did that they already over cut it over here on this corner.
They already over cut it over here on this corner so we might as well just went ahead and cut it
like that. Basically we're going to picture frame this thing out two by fours all the way around it
to make it uh make it strong strong as we can anyway with what we got dealing with.
So that's what we're doing today. We're going to see if we can compare it to about here.
The two by four was snapped in half. The two by six it was broken in half there for some reason.
I'm not exactly sure why but we're going to go ahead and clean all that up and
get it where we can work it and uh see what we can do with it.
And you're using a small battery. Yeah.
Okay y'all so we put double two by fours double two by fours double two by fours two by four
double two by fours double two by fours double two by fours and a sister two by four.
On all this so we're going to put this plywood in there he's measuring it out now
and uh we'll see what we can do there. So basically we shim these boards back up too.
So now these ain't going to be weak and these ain't going to be weak and uh I took them pieces
out of there so we're putting a big piece in there instead of little pieces. So looks like
gonna be about a four by four piece but we're gonna leave this piece out for right now.
We got to rework this it's all bent up get it fixed up and then we got to address this hole
over here that that box goes in that this grid goes on. So we gotta address it later.
I ain't gonna mess with it today. Trying to get this done and uh see what we can do.
Hopefully. We'll see. Maybe. We hope. Like they put a six foot piece in there one piece I don't
know why they did that that's just I would have put a eight foot piece in there but that's what
they did. So I'm trying to do mine a little methodical. Is that the right word methodical?
Yeah that might be the right word. But anyway we're gonna put this one big piece in there
and uh see what we can do with it. So we'll come back when we get to that.
He's out there cutting it now. We'll peek in on him. Let's see what he's doing.
Taking the two by four. See when you don't have a uh don't have a straight edge you just use
another two by four. So I got more insulation we're gonna put in there in a little bit.
But we're trying to get trying to get the hole clear. Filled up. We're knocking it out
one piece at a time. You ever heard of that just one piece at a time? That's an old
Chevy uh Cadillac song. You remember that song one piece at a time?
I got it one piece at a time and it didn't cost me a dime.
I don't know. It was 55, 56, 57, 58, 59 automobile. I don't remember that. Oh that's a good one.
It's a good song man. Three quarter inch plywood. Battery operated. And he's already cut
six two by fours. And put them all in there. So that's crazy. Battery operated. Getting it done.
We got it. Just like that. Now we're gonna screw the ---- out of and uh that hole will be fixed.
That's pretty easy. We're fixing that hole now. Fix that one. It's what we're over there working
on now. Doubling up two by fours running down the edges and the backs and the sides and all that
to keep it from falling in. I'm trying to keep it from falling in. Get your bit. It's stuck in the
