Paper Electric Parallel Circuits STEAM Lesson [Part 1]

Terrific Physics
40 followers
Jan 16, 2026
Hi, I am Jared. Welcome to Fun Science Demos. Let me introduce you to some of my friends.
I have a jar of fireflies, but they are not real fireflies. I actually used science to
create these fireflies. And hidden behind this picture is some electricity and a pathway for
that electricity to follow. And scientists call that circuits. And that is the big idea for today.
So let us take a look at how all of this works. First, let us look at our electricity.
Our electricity comes from these flat batteries. Now let us look at our circuits or the pathway
that the electricity follows. You can see we do not have any wires. We are actually using
flat metal tape to form our pathways. And it looks a little complicated to begin with,
but we are going to break it down and make it very simple for you to follow.
So let us take a little time to explain this circuit. So our battery goes right here,
and folding the corner of the paper is our switch. And if you follow our circuit, we have one light,
two lights, three lights, and four lights in our circuit. So how do I get from this,
a blank sheet of paper, to this, our finished circuit? Well, I am going to need a couple of
things. I am going to need a piece of paper. I am going to need a pencil. I am going to need a flat
battery. I am going to need a roll of metal tape that you can get pretty much at any hardware
store. I am also going to need these, some special LED lights that we have linked to in the video
description, so you know where you can get your own set of LED lights. So to start, I need to take
my metal tape and cut it into strips. I am going to cut off a long section, and now I just need to
cut this down into strips. So I have my metal tape cut into strips, and now I need to actually draw
the circuit with a pencil. And we are going to zoom in so you can see more closely how we do
this. All right, so I am going to start by picking a corner to be my switch. I am just going to fold
the corner down, and that is going to be my switch. This is where the battery is going to sit.
So I am going to draw, I am going to draw one battery circle here, and the top part of the
battery is going to touch that. This will be my positive side. This will be my negative side,
because remember every battery has two sides, a positive and a negative side. So my battery will
sit there. Now I need to draw the pathway. So I am going to come down, come over, come up,
come over, and I could really draw any path I wanted to. Now I am going to take the negative
path. I am going to come over, down, over, up, and here is where I want to make sure I go right next to
the other path I drew, because we are going to be making what scientists call a parallel circuit.
And our pathways are going to run parallel to each other, right here. And now my lights
will probably go somewhere in there. So now I just need to lay down my tape to follow my pathway.
So to get the little strip started, I like to just bend the corner back,
back and forth, and it should pull right apart. One side is sticky, so I am not going to pull
all the backing off. I want to overlap the spot where my battery is going, and now
just run the pathway down. When I get to a corner, what I want to do is do something
called cornering. So if my pathway goes this way, I am going to bend and angle my tape
the opposite direction, fold it back on itself, and in another video we actually show you more
detailed ways of doing this corner. Open it up a little bit, use my pencil if I need to,
come to another corner, come to another corner, cut off the extra, and there is one path.
So we laid down our circuit, now we need to test to see if the pathway actually works. So I put my
battery into place, the negative side down, the positive side, there is my switch. I am going to
hold the light bulb, hopefully, so you can see it, so it can touch the pathways and join the
pathways, and my light bulb lights up, and we have success. The one important thing to remember is
that just like this battery has two sides, a positive and a negative side, our light bulb has
two wires coming out of it, and one of the wires is positive, the other wire is negative. The longer
wire, if I pinch them together you can see this wire is longer, the longer wire is going to be
our positive wire, and that is going to be our negative wire. Now I am ready to attach my lights,
and to do that I am just going to use a pencil to poke through my paper wherever I want the
light bulb to go. Now when I put the light bulb in, I have to remember that the positive wire on
the light bulb has to come into contact with the positive leg of my circuit. Push the light bulb
through the paper, bend my wires down, and now I just want to make sure that I attach it. So here
I have one wire touching the positive leg of my circuit, and here is the negative wire. To attach
it I am just going to use a little piece of our metal tape, and then the other side. It is okay
if the light bulb pops up back through, and now I am going to use my pencil just to make sure the
tape comes in contact with the wire. Now let us check to see if it works. Alright, so we have
attached our first light bulb into our circuit. Now let us test it to see if it works. I put my
switch on, hold it up, and it looks like our light bulb works. So we put the rest of our lights in,
and you will notice they are not all lighting up. So we have to figure out what is going on.
Let us flip it over and see if we can figure out how to troubleshoot and make this thing work.
You will notice when I just start tracing and pressing on my circuit, the lights seem to flicker.
Well that is because I am missing the contact at some of these spots. I may need to go back over
some of this run with more metal tape to see if that could actually fix our problem.
So we have got some of our light bulbs working. As you can see, it is all a part of science,
and whether it works or does not work, learning is a lot of fun when you get to do things with
your hands. If you want to learn more about electricity and circuits, check out our link
in the video description. Science is so cool. Thanks for watching.
