Paper Electric Parallel Circuits STEAM Lesson [Part 2])

Terrific Physics
40 followers
Nov 2, 2025
Hi I am Jared. Welcome to Fun Science Demos. Most kids that I know
really love to draw. My friend Bella, she drew this beautiful snowman. My other
friend Catherine
drew this snowman. And using science we can take our artwork
to a whole different level. We are going to zoom in
and you are going to see that hidden inside these snowflakes
is a bulb and we are going to use science to light
those up. We have zoomed in a little bit so you can get a
better look at our snowflake. Now I am going to add this battery to the science
that we have going on behind our picture
to see what happens. Here we go. Check this out.
And there we go. Our snowflake just lit up
because we have some really cool science
going on behind our picture. Let us see if Catherine's snowman can light up too.
And there we have a nice yellow snowflake.
Way to go Catherine. So how did we do that? Well
first let us start with the light bulb. We use the special LED light bulb that
does not need a lot of energy
to light up. And you can actually buy a pack
of a whole bunch of these light bulbs that come in all different colors.
We are going to zoom in so you can take a closer look at this LED light bulb.
So I have my LED light bulb right here and I have my battery right here
and all light bulbs need electricity to light up
and the electricity is in my battery. So now let us take my battery
and attach it to my light bulb and you can see
that it lights up. Now notice with my light bulb I have two wires coming out of
the light bulb
and one wire is connected to one side of the battery
and another wire is connected to the other side of the battery.
So we have our light bulb. We have our battery. Now all we need is a path for
that electricity to follow and scientists call that path
a circuit. So let us flip our papers over and see if we can see the science
that made our light bulb work. So what do I see? Well it looks like I have
some kind of metal foil tape. I always thought electricity needed to flow
through wires and things like that. Well
not necessarily. Electricity can flow through anything
that allows it to flow. Scientists call that conducting.
Now remember how each wire coming out of our light bulb had to be connected to a
different side of the battery.
Well that is what has to happen in our pathways behind our picture.
My light bulb is right here and it is hard to see
and I have one path of foil tape connected to one side of the light bulb
and I have another path of foil tape connected to the
other side of the wire coming out of the light bulb. Now I need to connect
each arm of these pathways to different sides of the battery. Well how do I do
that?
Well I am going to take the bottom of the battery, put it on that side
and now how do I connect that arm or that pathway to this side of the
battery?
All I have to do is fold it over. Let us fold it over and watch our light bulb
light up. And there we have
our pathway, our circuit, our light bulb.
So now we are going to talk about how do you make your own. The materials might seem
complicated but they are really
easy to find. This foil tape you can find in any home center.
A scissors, a pencil, the battery, any office supply store
should carry these batteries and we have actually linked to where you can get
these light bulbs
in the video description of our video. Of course we need paper
to make our path. So here we go. We are going to start by showing you a very simple
path to make or circuit
to start off so that you know you are going to get this right. Now if you remember I had
to fold over the corner of the paper to make
contact on both sides of the battery. So I am going to do that
first. Fold over a corner of the paper. That is the part I am going to fold over. I am going to
put a little circle
that tells me where the battery is going to go. That is going to be the top side of the
battery.
That is going to be the bottom side of the battery. The battery will sit there and when I
fold the paper over
it lines up. Now I am going to put little signs
that tell me what side of the battery to put down
because a battery has two different sides. There is a positive side
and a negative side and that is going to be important in our pathway.
Now all I am going to do is just draw my pathway.
So I am going to draw one line and I am going to draw
another line and hopefully I am going to put my light bulb
right across them and my light bulb will complete that circuit
and it should light up when I fold it down. So now I have cut my foil tape into
strips and the nice thing about this foil tape is I can make my
strips wide or I can make them thin. I am going to use wider ones.
Now getting the back off of the foil tape is a little tricky.
I find to do the same thing as the paper. See how I bent the corner of the paper
over?
I like to just bend a corner of the foil tape over and getting it started
it is a whole lot easier. Now I just have to peel off the back.
That side of the foil tape is sticky so you want to be careful.
Make sure I am going to go right into the center of my circle so I know it is going to
contact that battery.
Now all I do is smooth out the tape.
That is one leg. Let us do the other leg. Now
I have my other foil tape ready and I am going to make the
other pathway. So now I have
two different pathways that I need to connect. The battery
is going to connect that side of the pathway and now the light bulb
needs to connect that. So
I have my light bulb. My two wires I am going to separate by bending them
just a little bit. And here is the interesting part.
So we have zoomed in on one of our light bulbs and just like our battery has a
positive and negative side,
our LED light bulb actually has a positive wire and a negative wire.
Do you see how one wire is longer than the other one?
Well the longer wire is the positive side. The shorter one is the negative side.
So when I line up my light bulb in my pathway in my circuit,
it has to be matched up. So we are back at the light bulb that is not lighting up.
Well I think that I have the wrong side of the light bulb
lined up with my pathway. So if I spin it around, now let us make our connection
with our battery
and see if we can get it to light up. And what do you know,
it lights up. It did not light up at first
and we were able to figure it out. A Cowboys football helmet
with the star lighting up with the light bulb. Take a look at that pathway.
Another football team with the light right there in the eye of the ram.
You can see those pathways. And then we are going to go even more complicated.
I have fireflies in a jar. Let us see if we can get these to light up
because our pathway is really complicated.
And now our fireflies
are blinking and lighting all because
we have light bulbs, batteries, and a pathway
for that electricity to follow called the circuit. So why do not you try making
one of these all on your own. And let us know how it turns out. Let us know how
you do
in the comment section under our video. And if you run into trouble,
feel free to ask us a question. We would love to help you out.
If you want to learn more about electricity or circuits, check out our
links in the video description.
Science is so cool and it can brighten your future.
Thanks for watching.
