Electric Circuits on Paper: The Basics

The Explore Channel
18 followers
Hi, I am Jared. Welcome to Fun Science Demos.
You know, in science it has always been really interesting to use electricity and
wires to light up a light bulb.
But because of new materials, it just got a lot
easier. Using a roll of metal tape that you can find at
pretty much any hardware store, round, flat 3 volt batteries,
a piece of paper, scissors, and these really cool LED lights,
we can make something called a paper circuit.
And that is the big idea today. Today we are going to show you how to make circuits
on paper. So where do we start? Well we start
with a piece of paper. So I want to start by drawing my circuit.
Now keep in mind that I need to be able to turn my circuit
on and off to complete the circuit. So to do that,
I am going to use a little corner of the paper as a little switch.
So I put my battery by the corner and I am just going to trace that battery.
It does not have to be perfect. And now I put another circle
opposite the battery so it is lined up.
Now here is a really important part. It is important to realize that the battery has
two sides. There is a positive side
and a negative side. And I know there is a positive side because there is a little
plus sign that lets me know.
So I want the bottom to be the negative side. That is where that part of the
battery sits.
And when I fold the top down, the top is going to be hitting the positive side. So I am going to put a
positive sign there. Two sides of my battery.
So you can see I have the spot where my battery is going to go. Now I need to
draw the path that the electricity will follow. And in science we call that our
circuit.
We are going to need to draw our circuit. So I can make my path
go any direction I want. So I am just going to bring this line down
and over. And I am going to take this line
over and down. And I am going to put a light bulb
right here. An LED light bulb
to span that path and connect the two. Now all I need to do is lay down this
metal tape along that path. And that metal tape will conduct the electricity.
But you will notice this metal tape is way too thick for my lines.
So I am going to cut strips out of this metal tape to make it easier to work with.
Alright, so now I am ready to stick my tape to my path.
The nice thing about this tape, it is not sticky yet until I pull off the backing.
So to do that, it is a little tricky. What I like to do is take the corner
and fold it down. Then open that back up.
Fold it the back way. And now I can see it separates in just that corner.
It allows me to pull that off. Now I do not want to pull all of it off.
Just enough to get me started. So where do I start? Well I am going to start with my
negative leg here
of my path. And I want to put the foil right into the center of that where that
battery is going to sit. So I know I have a nice solid contact.
And now I pull the backing off as I slide. And I get to my corner. And what do I do?
A lot of people think I can just cut it and run another leg
of my metal tape. But really the glue on the back of the tape
actually prevents the electricity from flowing really well. So we are going to
corner this. How do I do that? Well if I am going this way in my path,
all I am going to do is angle and fold my
tape the opposite direction. So let me move this little
tab so you can see what I am doing here. A little more.
So you can see I put an
angle fold right on the tape. So how do I get going that direction? Well now I am
going to fold it
again. Pull the backing off.
Use a pencil to help me if I need to. And we are going to zoom in so you can see what
that corner looks like
once we are done. Take it all the way down.
And my metal tape is a little long so I will just cut it.
We have zoomed in so you can take a closer look at how we cornered there.
Remember that glue could actually stop the electricity from flowing. So it is
really important to have metal on metal contact.
So you will notice I can pull that corner up. I just push it back down and I know now
the metal
is touching. Now keep in mind if I need to
add a little bit of extra metal tape I do not want just a tiny overlap. I want a lot
of overlap to make sure
there is plenty of contact metal to metal. So I am going to start way back here
and now pull it out. But you will notice I have a little gap
in my pathways. Well that is because that light bulb we are going to put in right in
the gap
and that light bulb is going to connect the pathway and the electricity is going to
flow through the light bulb lighting it up
on our paper circuit. So we have zoomed in so you can see our light bulb. Now
the thing to notice is that the light bulb has two wires coming out of the
bottom. Why two wires?
Well remember our battery? Our battery has two sides a positive and a negative side.
And just like the battery is a positive negative side the wires coming out of
our light bulb
are positive and negative. If I hold the light bulb up you will notice one wire is longer
than the other one.
Well that longer wire is the positive side.
Watch what happens when I match the positive wire of the light bulb
to the positive side of the battery and the negative to the negative. When I slide it on
correctly
my light bulb lights up. If I spin my light bulb
and I have the negative wire on the positive side nothing
happens. So when I put my light bulb down I have to make sure the positive side of
the light bulb
is in contact with the positive arm in my circuit.
So we have zoomed in on our circuit and we want to make it easier for you to see
the light bulb when it is lit up without my fingers being in the way.
So I am actually going to tape my light bulb in place. Now you could use any tape
but since I have the metal tape all I am going to do is cut a little section
make sure the metal wire of the light bulb
goes onto the other metal pathway. Press it down really well
and now do the other wire. We will check it
to see if it works and it lights up. So let us review what we have here.
We have electricity in our battery and instead of using wires
we use this metal tape and the electricity is going to flow through that tape. It is
going to flow through the light bulb and we can turn that light bulb
on and off. Well that kind of reminds me
of something. This little thing to turn the electricity
on and off it is actually a switch just like you have
in the walls of your house. Think about this. This could be the light in your
bedroom
and you have a switch on the wall and when you turn that switch on
the light goes on. When you turn the switch off the light goes off.
Well really what is happening is exactly this. The switch
opens or closes the circuit. So we started with simple circuits and the
only thing that may be a little hard to find are these
LED light bulbs and we put a link in our video description so you know
where you can get some if you wanted to try this on your own. Now we also have
other videos that talk about making circuits that are a lot more complicated
something like this. You can still see I have used metal tape but instead of one
light bulb we have one, two, three, four.
It looks complicated but it is really not that much more complicated but it is
a lot more cool. So I can take my paper circuit
and have something that lights up like a jar of fireflies.
Science is so cool. Thanks for watching.
