Rifle Plates: Will They Fit? Exploring Swimmer and Sapi cut hard armor in the wrong plate carriers.

Ballistic Lab
1 follower
Jan 14, 2026
No, I don’t know if your random model of plates will fit a random model of carrier. This is super surface level info.
Alright guys, so a buddy had asked me this question a couple days ago, and I sent him a video
specifically with these in an AVS
But the question seems to come up enough that I think it's worth exploring a little bit alright, so the question is
sappy cut verse swimmer cut and what is gonna fit in any particular vest alright, so
I understand it comes up people buy plates they buy vests secondhand sometimes
The best isn't offered in the cut that you have and people want to know kind of cross-compatibility
right so
generally speaking a
large
Swimmer cut and a medium sappy are interchangeable alright
I'm not saying that across the board because some vests are weird, but that's generally the rule of thumb so
The most common swimmer cut plate that I think people are looking at these days is going to be the Hesco
L210
All right, which comes in a large and small as far as I know
this small is just stupid small good luck finding anything that fits that and
Not looking straight ridiculous if you have it alright, and then
For my medium sappy here. I apologize. This is a terrible example of a medium sappy. This is the p210
It is sappy cut, but it's only rated for pistol rounds, so it's tiny
I mean, this is like sticking a clipboard in your vest. They're actually really crazy
Highly encourage you to check them out. They're pretty neat all right, so
We'll look at kind of what what does fit all right, so?
For starters we'll throw a an AVS up on the tape
All right, so I happen to have a small AVS here all right, so this
this medium p210
Happens to fit because it's so thick all right that that shouldn't happen all right
What should fit in there is a small?
Sappy cut and you can see that's that's a very snug fit in there all right very little overhang on the bottom
so small sappy
AVS
the large
L210
Will fit
It's a little snug on the sides, but it fully seats, and you can see
That that flap is going to have no issue closing all right, so a large
L210 will fit small sappy cut
Rigs and the AVS is one of the least forgiving ones out there in my opinion
So the fact that that fits should make me fairly confident that it'll fit any small sappy cut all right
And again, you can see it's a little snug, but not too bad all right, so
large
L210 in a small sappy cut let's see how the the reverse plays all right, so
One of the few
Swimmer cut rigs that I own is this
Pig rig all right, and it will take these large
L210s all right this one had some modifications done to it, so it lost a little bit of the plate pocket
So I actually had to have it modified to give me a little bit longer flap there
So this isn't the best example, but I really don't own a whole lot of sap of summer cut stuff
so
Keep in mind something that will fit a large swimmer cut this small sappy
Hangs out the bottom all right, so
It is not
the most
cross-compatible
Concept out there all right, but it fits
Kind of all right. I wish I had a better
summer cut so that
Potentially it's sat further into the top
but the issue that you run into
with these is
the angles at the top of the plate all right, so
Swimmer cut rigs are much narrower you can see the top of the plate is about the same size
But there's so much shoulder on the sappy compared to the swimmer cut that it bottoms out quicker
All right, so
Showing you how that fits in there again
It's not in these corners here all right
So that that that's where the issue comes into with that cross compatibility
And then we can really throw a wrench in the plan and look at civilian cut plates all right, so this is a
10 by 12 which should be a medium sappy
But it's not all right, it's got a different shape plus. This is a single curve which doesn't help anything at all
But you can see this is not
Not gonna fit in there well at all
Like it bottoms out right there because those shoulders are so much broader
all right, so
really the big takeaway here is
By the plate that fits your vest and don't try to make something else work
But if you do have to do that pick something that has a little bit more
forgiving of a plate pocket
so like the
the JPC
To how it's got the stretch panels
So you try sticking our swimmer plate in here?
This is a medium
2.0
The stretch will make it fight you a little bit more getting in there, but you can see
It'll it'll get in there to the point that the flap will close
Now let's try our medium
Civilian sappy cut
See if this gives us any grief
All right, so you can see how?
The medium civilian cut will fit in there. Thanks to the stretch panels
Whereas it wouldn't in that pig brig because it's it's all solid cordura all right, so
If you're if you're playing with fire and getting the wrong plates for your vest
Get some sort of stretchy vest don't get straight cordura
but please try to actually just get the
Plate that you need and then the last thing
That I am guilty of this as well is
Plate thickness makes a difference
All right, as I struggle to get this back out of here
So we've got our medium
P210 here
Small AVS
medium sappy
Fits in there without any issues
Because it's so thin
all right, so you know stretchy stretchy panels on your rig and
Thinner plates can also give you more leeway
Alright, so all things to keep in mind. I'm sorry if that was a little
Disjointed, but there's a lot of options out there, and I am by no means the expert all right, so
Think about what you're doing first. Don't call cry and ask them what plates are going to fit in their vests
They've got better things to do like to make vests
Do a little bit of research and buy the appropriately sized things all right. Thanks guys
