Browning 1886

Uniform & Arms
3 followers
Jan 14, 2026
A close-up look and the history and operation of what's considered by many to be the smoothest and most attractive lever gun of all time, the 1886 lever action. This gun is Browning's beautiful and high quality remake of the famous Winchester 1886, in .45-70.
------------------- ------------------------
Hickok45 videos are filmed on my own private shooting range and property by trained professionals for educational and entertainment purposes only, with emphasis on firearms safety and responsible gun ownership. We are NOT in the business of selling firearms or performing modifications on them. Do not attempt to copy at home anything you see in our videos. Firearms can be extremely dangerous if not used safely.
Big bruiser, big bruiser, .45-70.
This is a Browning, kind of a Centennial model, celebration of the commemorative of the Winchester
1886.
You may have seen this gun in a couple other videos, I've never really featured it, talked
much about it.
It's one of my very favorite firearms.
Beautiful gun, smooth, this lever action rifle is considered to be the smoothest, highest
quality, best design lever gun ever made, just in case you wanted to know, and it really
is.
It just feels wonderful.
It's rather large and heavy, but it is just like milk, it's just smooth as glass.
That's because John Browning designed it, of all things.
This gun was designed in 1880, well, 1883 actually, essentially, and then finished up
by 1886 by our firearms genius, John Browning, who also designed a gun that's still in use
today in our military.
What did you think about that one?
Being used probably in Iraq, Afghanistan, as I speak.
He goes all the way back to the 1870s, 1880s.
This gun, like I said, it's a commemorative model.
This was made in 1986.
In 1986, Browning came out with 12,000 of these, limited run, 3,000 of them, I think,
were silver inlaid and had all kinds of engraving and things on them.
I think it was 7,000 were like this, just blued gun, nice gun, and then a couple thousand
for the Montana celebration of some sort, kind of a specific purpose for those.
So there's about 7,000 of these like this one made, and it really wasn't all that expensive
in 1986.
I mean, it wasn't cheap, but it wasn't like some big dollar gun or anything.
It was $400, $500, $600, $550, something like that, as I recall, if you check my records.
But I had always wanted an octagonal barrel, big bore rifle, and I saw, I read an article
that Browning was going to be making these, and I ordered it.
I think it might be the only gun I have ever ordered, sight unseen, other than just seeing
some pictures of it.
So I trusted Browning, and they did a good job.
So appropriate that Browning would do this in 1986, a remake of the Winchester, because,
as I say, this action was designed by John Browning.
And I know some of you may not enjoy history as much as I do, and I try not to go into
too much detail about the history of any of the guns that I kind of review and shoot.
But these old guns like this, they deserve, yeah, a little bit of reminder, I think, of
how they came about.
And, you know, if it's a little too much, you can switch over to the Cartoon Channel
or something, some of you younger folks maybe.
Not to insult the younger folks, some of you all, I know, have a deep interest in history
and how these firearms came about.
But what happened was, back in the 1870s, 1860s, you know, we had some really nice lever
guns.
Probably some of you have them.
The Henry, the 1866 Yellow Boy had a brass receiver, and then the 1873, big year for
guns, the 1873 .44-40 lever gun, Winchester, you know, came out, and that was very, very
popular.
It was the first centerfire cartridge, you know, lever gun, the 1873.
You've seen me shoot mine from right here, in fact, on this hillside.
Really nice guns.
But all those guns fired kind of a pistol cartridge, really.
You know, .44-40's just a pistol cartridge.
.45 Colt, you know, now the Chamberlain .45 Colt, like mine, they're just pistol rounds.
You know, fairly hot, powerful pistol rounds for the day, but they were just pistol rounds.
So there was kind of a need for a bigger round, you know, people in the mountains, in the
plains, hunting buffalo.
The Sharps was, of course, very popular.
You could really reach out with those.
But there was an interest and a desire for a repeater in a more powerful cartridge.
Well, with that old toggle link system, action on the Henry, basically it was the same action
on the Henry, the 1866, the 1873.
And even the 1876 Winchester, which was a bigger gun, it was bigger, more like this
gun in terms of size.
But it was still, I'm talking Winchesters all through here, except for the Henry.
But it was still that toggle link system.
It was just kind of like the 1873 on steroids, basically.
You still had an essentially weak design.
Great guns.
So it wasn't capable of handling the .45-70, the power or the length of the cartridge.
Well, so there was a need, there was an interest, and Marlin came out with one in, I think it
was 1881, that would handle the .45-70, and so they were providing some competition for
Winchester.
Okay, so that's kind of the stage.
Well, in 1883, one of Winchester's reps was out in, I guess it was Utah, out west somewhere,
and he ran across this single-shot rifle in a shop somewhere, and he thought it was pretty
interesting and intriguing.
He'd never seen it before.
And this was when Winchester was already really successful.
So this is one of the Winchester sales reps, runs across this rifle, and it has Browning
Brothers on it, made by the Browning Brothers.
So he thought that was interesting.
A really nice rifle, well-made, showed a lot of quality, craftsmanship.
And so you can imagine, like, who's this?
We're Winchester.
We should be making this.
So he sent it back to New Haven, Connecticut, for the engineers or the management to take
a look at it.
Well, one week after that, they send the Vice President and General Manager, Oliver Winchester's
son-in-law, to Utah to find the guy that made that.
And they do.
He heads off to Ogden, Utah, to look up John Browning and see what this is all about.
And he goes into the shop in Ogden, Utah, looking for him, and I think he finally finds
him upstairs somewhere bent over a machine working or something.
Thinks he's one of the workers, factory workers or something.
And it's just a little shop, I think, with just a handful of people.
And he wants to ask some guy where John Browning is.
Where's his office?
That is John Browning.
I think maybe he was in his twenties at that time, and he was a young man.
And Thomas Bennett, the VP there at the time, was looking for an older gentleman, I guess.
But anyway, kind of interesting, John Browning got started early.
He was just a genius.
You know, he could design, make anything.
And so they reached a deal, long story short.
On that single shot rifle, Winchester bought the patents for it.
I think they paid about $10,000, which would have been a lot of money, 1883, for that single
shot rifle.
It later became the high wall, the very popular, successful single shot rifle.
High wall, low wall, I think there were a couple, three variations of that gun.
I've never had one of those.
I've admired them, but I've never had one.
They were, in a way, like a Sharps.
Sharps went out of business, I think, soon after that.
And then the high wall has just kind of continued.
I think Ballard Company might have bought them or something.
I'm not sure about the history of all that, but they're a little bit different than the
Sharps, but they're a really nice, simple design in a single shot rifle.
So that was a very successful gun, all right?
So that's one side of it.
Well, while Bennett, the Vice President and General Manager of Winchester, was there,
in Ogden, talking to John Browning, he also was shown a workup of this action.
You knew I'd get back to the main point here eventually, didn't you?
Well, old John Browning had a wooden carving of this action, all right?
And it was just an action he was working on.
Up to then, John Browning had not designed any of the lever guns.
Sometimes we think John Browning designed every gun on the planet, but he had not.
And he had come up with a stronger action.
You notice on this one, I could do a comparison sometime with a toggle link system, but with
this one, you have a couple of lugs that come up through the receiver, and they lock into
the bolt like that, okay?
And man, they really lock solidly, plus it's all beefy.
So they've got mortises in the side plate there, and they just come up through that.
Just like the 92.
The Winchester 92 is kind of a smaller version of this gun, basically.
This gun is the granddaddy.
It's the steroid version of the 92, but that's how it works, and it really locks up tight,
the big old gun, all right?
So he had a mock-up of that carved out of wood, and Winchester bought the rights to
that too, or at least the first right of refusal, I think, or something for $8,000 or $10,000.
And so it was a good day for John Browning.
And they took that back, and by 1886, they were actually manufacturing, with just minor
changes, this gun, and the Winchester.
So this gun, they needed a gun like this, in big caliber, to compete with Marlin, and
people wanted it.
They wanted a repeater that would fire some of the big bore cartridges, that even the
Sharps were chambered for, because the .45-70 was the most popular chambering in it, as
I understand.
The most common, most popular, but it also was chambered in some of the .50 caliber rounds,
and a lot of those other cartridges are kind of oddball cartridges to me, because I don't
follow them that closely, but some really good cartridges.
So big old gun, a little bit heavy to pack around all the time.
A lot of people probably did not like it, because it was so big.
But then again, if you needed something with power and a repeater, this thing holds nine
rounds.
Can you imagine?
Nine .45-70s in the magazine.
That's a lot of heavy lead, right there at your disposal, here in whatever, Buffalo country,
Indian country, grizzly country, or whatever.
I'd sure like to have this with me.
Old Grizz showed up, by surprise, sometime.
So nice gun, like I said, 1986, I acquired this, that's been what, almost 25 years now.
And I need a better butt plate.
I always have to extend the grip, because this thing's about two inches too short for
my length of pull, so I'm still trying to make do with this thing.
Every time I find somebody that makes a butt plate for this, a leather one, they need the
right rifle to design it or something, or to make it, which I don't fully understand.
These are all the same size.
But one of these days, I'm going to get me a really nice pad.
I actually need about that much length, but I also want it to look nice.
But with me, it's function over form every time, that's why I like Glocks.
The function's the most important thing.
So even though the thing's coming apart, it feels great on my shoulder.
So until I get something better, it's going to stay.
Okay, so let's take a couple more shots with it, while I'm gabbing.
But I just find it fascinating, old John Browning, boy did he have a mind.
If he had been in the car business, I bet you none of us would be broken down or at
the repair shop as often as we are.
I'd say he and Gaston Glock had a lot in common.
These big old slugs, this thing does operate just like butter.
I'm sure as I say this, it'll hang up or something.
So let me take a couple more here, so you can see this thing.
Again, 45-70, the government round.
For those that don't know, this was the cartridge that of course was adopted by the military
in 1873 also in the old single shot trap door model rifles.
So let's just get my ears on right, and pick this thing up, fire a couple more rounds.
So that is a nice gun.
It doesn't kick that much.
It's got enough weight, and of course I have an extra pad because of my length of pull.
But it's very comfortable to shoot.
Shoots the big old 405 grain round, that's what I fire in it.
That was kind of the original loading.
They also load a 500 grain round, but this is a 405 round.
It trucks on along.
It's not a high speed rifle that will shoot a flat trajectory at 500 yards or anything.
But at these kinds of ranges, or at 200 or 300 yards, it will get the job done.
It's a lot of lead trucking through the air.
This is Browning made this one, which is appropriate because he's the one who designed it.
So it doesn't bother me that it's not a Winchester.
The originals are very, very expensive, and I'm not sure you'd want to bring them out
here and shoot them like this if you did buy one for $10,000 or something.
But they're still around.
They made this gun from 1886 until 1935, and wonderful old lever gun.
Biggest, heaviest, strongest, most attractive, most desirable in so many ways in terms of
a lever gun that was ever invented.
Thank you, John Browning.
Life is good.
