BIG OLD CHUNK OF IRON! Can We Save This MASSIVE 90+ Year Old DIESEL Engine?? ITS TALLER THAN ME!!

Screw Driver
87 followers
#machinery #motorbikes #occupations #career
They took a Hammer and a screwdriver to it! Today's video is on this 1930s stover 10 hp diesel engine. Hope you guys enjoy! This engine will be with me at Albany, Minnesota Pioneer Days this coming weekend, 12th 13th and 14th. Swing by and say hi!
There will be another video in a few weeks, with some close-ups!
In today's video for once we're doing something that's a little out of my comfort zone. We're
going to be working on this behemoth. This is a 1930s 10 horsepower Stover single-cylinder diesel
engine. There ain't very many of these out there and it's kind of unusual in the U.S. to see
single-cylinder diesels at all and today we're going to see if we can get this thing running
as well as figure out what problems it has. I hope you guys enjoy and stick around to see how it goes.
Let's get right into it. Overall this engine looks like it's in pretty okay shape. There's nothing
severely wrong with it that I can see other than the fact that there's a crack in the foot of the
base but that's going to stay that way as long as I want it. I picked this thing up pretty early
this year on Craigslist of all things for a pretty good price and when we went down to get it we
figured we'd stop at a swap meet on our way home to sell some stuff and when we were there I was
bored and decided to start messing with it. It turned out it had no compression and the reason
being for this is that somebody took the head off and pried it off with a screwdriver ruining the
copper head gasket in the process. That is what made this skid on the back burner for a few months
until the middle of the summer when we got a different head gasket sourced for it. With that
all being said the first thing we need to do is get this thing on a skid of some sort as currently
it's really hard to move and really heavy. I want to be able to put it on a pallet truck or forks
of a loader and move it easily so we're going to do that first. I hope you guys enjoy. If you have
any questions or know anything about this engine please leave a comment down below. I try to
respond to all of them and they're always entertaining to see. Well I guess there's no
audio on that one. With this thing skidded and a lot easier to move it's time to see what's all
wrong with it. One of the people before me ended up replacing the head studs with all thread and
I'm not a big fan of that nor were the people I talked to about this engine so I ended up replacing
it with some grade 8 studs. Oh man! All right so let's see here. I put oil in it. Forgot to check
to see if it had a drain plug. Spilled most of that on the ground so that was fun. Put a new
head gasket in it. Faced all the surfaces for the head. New head studs all that stuff. I think we're
ready to give this a go. So these engines use instead of a glow plug they have something called
kind of a punk I think it's called and this little tab comes out and then you just get this uh you
can roll up a piece of paper and it'll work but it doesn't work as good but you can uh buy these
things online for this but I don't have any on me at the moment so I'm just gonna shove a piece of
paper in it light it up until it's a nice ember and hope that it works good. With any luck this
thing will hit off. So I spun it over a few times to get some extra squirts of fuel in there.
Hopefully help us out. I'm gonna turn the fuel off until I get some speed cranked up because I'm
gonna try this by hand the first time if it don't work I'm gonna have to make some kind of electric
motor to start it because this is a lot of engine turnover but yeah I'll turn it over until I get
some speed up with the decompression on turn the decompression off and then turn the fuel on and
hopefully we get some momentum and some fun. I don't have any fuel system set up so it won't
run very long but I don't have water in it so I don't want it to. Oh now the question is when it
died is it because it's out of fuel? More than likely by the looks of it. So all right that's
covered in oil because somebody spilled oil everywhere. That was surprisingly easy. That was
life right there leaking fuel everywhere. I always had the stigmatism that these old diesels were
hard to get going and finicky and I don't know that seemed like a pretty easy first try. I have
no idea what I'm doing by the way. Never mess with a diesel. I've messed with a lot of other engines
as you've seen on my channel. Not a diesel. Yeah there was air in there. Let's give this another go.
I need more fuel though. I wonder if I can get it to hit without the punk. Doubt it but it's worth a shot.
That's a solid note and all the energy of me trying. Oh tell you what that's a workout.
Well it runs. It doesn't run very good. I think it's currently only running off the punk but
that being said this valve leaks pretty bad and any bit of compression you can get on a diesel
is important. That's going to be it for today's video. I'm going to make another video of when I
get it finished showing you the cooling system, fuel system, and everything else I do to it once
I get it running correctly and please consider subscribing if you want to see that. I will
hopefully have it out in a couple of weeks. I hope you guys enjoyed and I'll see you guys next time.
