First Spear: Sloucher (BALCS/SAPI Carrier) / An Improved Sleeper

Ballistic Lab
1 follower
1 Video View·Jan 9, 2026
First Spear: Sloucher (BALCS/SAPI Carrier) / An Improved Sleeper
Alright guys, tonight we're looking at the FurSphere Sloucher, which is a bulks cut armor carrier.
So, I've been a fan of the
Sleeper for years. It's their slick bulks carrier.
I've used that
pretty extensively since I was issued bulks armor and required to use it a lot.
Sleeper was really cool, very very comfortable setup, and I suspect that this will be equally comfortable
with a little bit more utility to it. So, I've been eyeing these up on eBay.
It is FurSphere, so I think retail on these is
is like a paycheck.
It's
right around 600 bucks, I think, is what I've seen them
traditionally go for. I managed to pick this one up for, I think, 200 bucks through an offer on eBay.
So, there's a couple vendors. One guy's asking a premium, and he won't budge, and then
this one actually came, I believe, from
GGG. I can't remember what that stands for. They took my offer, and so now I have one.
So, looking at it, it is FurSphere laser-cut MOLLE on the whole front panel, and then it has the
wings off the sides here, which is where the the bulks armor will extend, which is also MOLLE.
So, it essentially gives you a
slightly lengthened plate carrier profile
with wingman pouches built in, is kind of what this works out to in the front. And you can see the hard-mounted tubes here,
so the cummerbund will wrap around and secure that. So, these are
functionally internal to the cummerbund in every possible way. If you've got radios here,
your radio or your your comm wire routing is fixed to the front plate bag.
So, that's a win
versus, you know, taking tubes and mounting them here and then having MOLLE cummerbund, in my opinion.
Looking at the rear bag,
it is also
full MOLLE on the plate portion.
If you don't have any experience with bulks cut armor, the rear is
significantly longer than what you would typically get with a bare plate carrier.
The cummerbund is
velcro fastened,
run internal to the
the MOLLE here, and then it's kind of a surprisingly simple cummerbund on here.
So, you've got a good chunk of elastic in the back, and then just kind of, it feels very pat cloth-y,
and then secures to the tubes up front. So, your plate carrier, or your cummerbund, I'm sorry, is slick.
There's no velcro internal, or MOLLE, or anything, which is just kind of interesting.
But, you could, in theory, drop any other cummerbund that you wanted in there, as long as it's terminated with tubes.
So, you've got plenty of options there, and then
the
the wings on the rear are aligned with velcro, so you could put some of their Ragnar pouch line
there if you wanted to. Like, if you wanted radios on the back, for whatever reason,
like, you got an MPU-5, and you don't need the whole antenna farm in your face,
you could, you could situate that back here. And then, it does have a internal elastic cummerbund as well,
which, if you don't have any experience with internal cummerbunds, I highly recommend them.
They make everything so much more stable and comfortable, and it just makes life great.
The shoulder straps on here are kind of rudimentary, and it was a little surprising. So, you've got a
sleeve very similar to the the Crye JPC sleeves.
I don't know if it's gonna show up well, but this one does have foam on the internal side,
so I have no doubt that it's gonna be very comfortable.
But then, your straps are just straps.
You've got loop on the front bag and hook on the rear bag, and they just line up on top of each other.
So, you could, you could tighten that up as much as you wanted to.
It's not as much of a concern with a bulks cut carrier, just because everything's so much longer,
that you're gonna need to get it higher anyways.
So, this isn't gonna be cut to have some, some massively long shoulder straps on it.
And then, I could have thrown armor in here, just to give it a little bit of life, but
installing armor in these things, and this is true for just about all of these options, is a real pain.
So, I didn't do that just to show you guys how it works. So, you've got a
small portion of
Velcro closure on the bottom of the plate bag,
with very limited Velcro continuity.
Not a huge concern, because it's really only supporting the soft armor. And then, you can see in here, you've got your plate riser.
So, this can take your rifle plates as well,
and they will go in there, and there's
elastic
to help keep some lateral movement out of there.
I don't know how well that's gonna show up, but you can see the elastic there.
So, the plate will slide under there
to help keep everything situated, and then you close it up with that,
that flap, to get your plate height where you want it.
And then, you've got this bottom elastic here, so you can tuck your plate in, and that'll keep everything situated there.
And then, once your, your rifle plate is in there, then you're gonna put the bulks in,
which you're gonna fight with, but that's fine. It's,
you'll be a better human having, having beat the system.
So, these things are not ideal at all for rapidly changing things, and with the plates being kind of installed first,
it's not a great option to quickly move rifle plates from here to a plate carrier as needed.
So, that's kind of really the only, the only big bummer there.
All told, I have no doubt that it's gonna be as comfortable as the Sleeper, but provide
extensive mounting options for, for whatever.
My, my typical use for the Sleeper,
it wasn't a huge deal that I couldn't mount things to it, because it was literally just to carry armor.
And then, I just carry whatever equipment I needed by hand.
But, if you have bulks, and you actually need to use equipment, you know, effectively, this is a good setup.
You can see you've got your, your stretch panels here to, to account for the rifle plates.
So, if you don't have your hard plates in here for whatever reason, you just needed the bulk soft armor,
it's not gonna be a big floppy mess, because there's no, like,
established plate bag in here. It'll just stretch to accommodate those as needed.
Super pumped to have this thing, and
play around with it, and get it all
set up for, for whatever
LARPing that I'm gonna do these days. All right, so that is the First Spear Sloucher.
I don't know if they're still listed on their website,
but there's a handful on eBay, if you still use bulks armor, and, and want to get set up with a very quality setup.
Thanks, guys.
