Antique Seth Thomas Overhaul - Part 1 - Introduction

Chrono Chronicles
8 followers
3 Video Views·Jan 8, 2026
Hello, everybody. My name is Andrew Bracken, and I am a horologist, or a clock repair expert,
or just somebody who messes around with clocks. It's a hobby of mine, something I've been doing
for quite a long time. You'll have to excuse the background noise. Part of my collection has
decided to start chiming. So anyway, as a matter of fact, we're about to hear this one in just
a minute. But anyway, this is the clock we're going to be focusing on today. It is a Seth
Thomas cottage clock from January of 1889. It is an eight-day time and strike. I'm on the hour.
The one behind you going off is very loud.
What a good start to this video. But anyway, moving on. What we're going to be doing today
is we're going to be focusing on this one right here. As I was saying, this is a Seth Thomas
cottage clock. It's from 1889, January. And we know this because on the back of the clock,
which I will put a picture up here in a moment, it has the date code of 9881A. The A signifies
the month, and the 9881 is just the year flipped. So instead of saying 1889, they would put it
9881. So anyway, moving on. We're going to be focusing on this one today.
It is a very nice piece. It is not perfect by any means. So far, it does keep time,
but there are some small issues that need to be addressed first. I have already inspected it. I
have not done any work to it yet, but I have already taken the dial face off, inspected the
movement. I have not taken the movement out. I have not taken anything off except for the dial
face, the hands, just to inspect it. So anyway, we're going to go ahead and remove this dial face.
So now we have our clock here. Four screws. They're just a small slotted screw. But before
we even try to mess with those screws, we first have to take the hands off. Now there's a couple
ways to do this. There's safe ways and not safe ways. I just like to take a pair of just regular
old tweezers or tweezers, needle nose pliers, and I just on the slender, the more slender end,
I just kind of hold it here and just give it a little push. I just take it out and then I have
a little cup over here that I put things in here. Then this little brass washer and thing here,
two pieces there. Just kind of put those aside. And then this one here, this is where I wish I
had my fingernails. The hour hand just kind of pulls off like that. Okay, pretty simple.
And we're going to go ahead and stop this. I'm just going to take the pendulum off
way out of the way because until a while from now. So anyway, so we're just going to go ahead
and jump right in here with a slotted screwdriver, a little one. I remember right this one here,
the slot was a little not very nice. And then when removing the last screw,
you kind of want to keep a little hand on the clock here or on the dial to keep it from falling
and potentially messing up the, you know what, the thumb here. These screws are in at a bit of
an angle. Work that out. And voila, we have our clock movement, which to the, you know,
first impressions are everything here, but it's fairly clean for the most part. It looks like
it hasn't really had any service before just on initial observations here. But there again,
appearances aren't everything. But what I need to do here, and I will adjust the camera to show you
here. Okay. This is what I need to focus on right here. This, this pivot is the pivot hole is very
worn. You can see how far over I can move it. It is nowhere near the center of the oil sink,
which tells me that it's badly in need of service. And if I can move that with the spring under
tension, that's usually an indicator that it needs to be, needs to be repaired and a new bushing
installed. Now, before I go any further, let's take a look at some of the other tools that you will
need to complete this. I would like to make this a how-to video. And so by, you know, making this
into a video that, you know, just about anybody can, can watch and understand what's going on.
It's, um, it's really not hard. This is kind of an intro to clock repair, and I'm not saying that
I'm an expert by any means. I try to, I try to explain things as best I can. I know I'm not the
public speaker, but I will do the best that I can and try to be as informative as I can
to try to help you out.
