Antique 1974 cuckoo clock restoration

Chrono Chronicles
8 followers
11 Video Views·Jan 4, 2026
Welcome back to the antique clock shop. Here's the antique clock I've been working on. I got it all cleaned up in pieces. In good shape.
The movement has a date code. It looks like it's from January of 1974.
Let's see that. I don't know if you can see that or not, but there's a code right there.
But it's all cleaned up, oiled and ready to go. We'll get the chains back into it and then get it back into its case.
These are a little tricky. I like taking the ends off. It makes it easier to just click the wheel around and load the chain back onto the wheel or the weights.
I usually have a round end and a hook end. I just take them both off. No matter which direction I can load the chain and it makes it easier to put it back in the case.
It makes it a lot easier not to have to deal with the hook.
I've got the other side.
That seems a little trickier.
If you get up the hook and put a little sprocket in there, it's working around and it'll drop it in by itself.
The other side, you pull it.
Now, without tangling everything up, take the case over.
I've got to watch that.
I don't want to break that.
The nice thing about this one is it's one big slot instead of...
Oh no, they do have that extra hole. I thought it was just a slot. That's for the pendulum.
I've got to get this sorted out and figure out what hole these go into.
I was thinking there was one slot so I didn't have to worry about the hole, but apparently I have to worry about the hole too.
We'll get it sorted out.
I have a quick tool.
There we go. That's one.
This one's a nice big hole here.
You've got to be careful you don't get them tangled up because they'll tangle up real easy.
Using that little hook makes it easy.
Trying to get it in there without it sometimes can be a bear.
Okay, now we're going to drop the movement in place.
A little more roll around the front.
The arbor sticks out front and makes it difficult to lay it flat.
Screwing back in the movement here.
Let me show you.
Right about there.
The next step is to get the little bird back on the perch there.
Let's see how it works on this side.
There's a little piece of wire that hooks onto the door.
And then as the bellow comes up there's a wire that kicks the back of the bird so you'll clear the opening if it doesn't do it.
This little wire here's got to hook onto the door so the door opens.
It's a little difficult to get it in.
It's easier for something to grab it.
I can't get my fingers to work right to get it in there.
Let's see.
There's the wire.
There's the door.
All right.
Voila!
Lock that in now.
Now this one here, I've got to rebuild the bellows.
I'm waiting on the paper to come in.
I had to make a new block for this one here.
A new top block.
Because the other one wasn't there.
I'll get the bellow paper back on these.
I'll go inside here on the side.
Like I said, this one, I think it's going to be this one here is going to have that wire on it.
And as the mechanism comes out of the movement here,
these two wires here run the bellows.
And as the one comes up, there's a wire that kicks the back of the poopy bird.
So as he goes through, he'll clear the opening.
So as soon as I get the bellows paper in,
I'll get these all made up and we'll get them back on the clock
and get the clock on the testing stand and get it working.
That's all I got for this video. Thanks for watching.
