Resin 101: The Basics of 3D Printing with Resin

Technology Information
13 followers
4 Video ViewsยทJan 3, 2026
AI GeneratedยทMay contain errors
Hey everybody, Chris here from It's Me Made,
and today we start Resin 101.
I'm gonna be going over all the things
that you need to know about resin printing.
So some of the things that I'm gonna be covering today
is the differences between a resin or SLA 3D printer
and a FDM 3D printer.
And I'm gonna be talking about the safety precautions
that you have to take with resin 3D printers.
It's not like FDM.
There are safety precautions when it comes to this.
And also maybe you've been on the fence
about getting a resin printer and you just don't know.
I'm gonna be talking about
whether it's really right for you or not
and some of the things to think about before you get one.
But on the other hand, if you already have one
and you're new to resin printing,
this is gonna be a good foundation for you
and there might be some stuff in here you don't know.
So let's go ahead, jump into this video.
We're all familiar with our FDM printers.
It takes a spool of filament
and what it does is it takes that filament
through a hot nozzle and then that hot nozzle
will actually melt this filament down
and squeeze it through the nozzle and draw the layer.
And then when it's done drawing a layer,
it moves up and does it all again.
And I tell you what, I love my FDM printers
but when it comes to time,
I love my resin printers a whole lot more.
Because you just have a bottle,
you pour it in and it does the entire layer all at once
and then it moves up,
does the entire layer all at once again, then moves up.
So a resin printer will actually print a whole lot faster.
And the greatest thing about a resin printer
is you can fill up your build plate.
I mean, load it and it is not going
to change the time at all.
Unlike an FDM printer,
if you put a bunch of things on that plate,
you know it's gotta do every single little thing
and it takes forever to print.
But the beauty about resin is it doesn't matter
how many things that you put on your build plate.
What matters is the height
because of how many times it actually has to print a layer.
So just so you know the basics
of how a resin 3D printer works is
on the bottom of the 3D printer, there is a screen.
And this screen is what allows the UV light to show through
because the resin we use is UV sensitive.
So it will cure with UV light.
So essentially we are curing the resin to be hardened
for what is being exposed through that screen.
Then you have your vat.
And at the bottom of that vat is a clear plastic,
which is called a FEP sheet.
And that will allow the UV light to show through
and cure the resin onto the build plate.
So then the build plate is actually going all the way
into the resin and then that light is turning on
and it cures itself to the build plate.
And after it's done with that,
it lifts up out of the resin
and then comes right back down,
but it comes back down with a little bit of a space.
And that space is actually what is going to be curing
to the last piece.
So it will actually just keep doing this.
So it doesn't just pull itself straight out,
even though some of those cool time lapses out there
looks like it just pulls itself out of the goo.
It actually does this and it just keeps bouncing
back and forth and pulling itself out of the resin.
So unlike FDM printers where we're always fighting gravity
and those supports might fall
and then it's printing in midair
and has nothing to do except fail.
With an SLA printer, we're actually using gravity
because we're pulling it out and it's hanging.
So you don't need as many beefy supports
as you do in FDM printing.
Now, for those of you that are those FDM printers,
I'm sure you know what Cura is and Cura is that slicer.
But with resin, you can't use an FDM slicer for SLA printing.
You have to use an SLA slicer.
The two big ones out there is Chitubox and Lychee.
And those two are great programs.
I like them both, but Chitubox is one of those
that I started with it and I've used it forever
and I'm just comfortable in it.
But more and more, I'm using Lychee
because it's got a lot of great features in it.
And it works a lot like Cura in the sense of
you have to bring in your model,
you have to support your model, and then you slice it.
And then after it's sliced,
you save it to a jump drive or a disc
and then you can put it in your printer to print.
I'm going to be doing another video
going more in depth on the slicer.
Some of the big trade-offs when it comes to SLA versus FDM,
in my opinion, FDM is just,
as soon as you get it out of the box and put it together,
you can hit print, as long as you've got filament.
You never really have to worry about anything.
And when a print fails, you just scrape your build plate
and then you start it again.
Or you have to re-slice it and start it again,
depending on the failure.
When it comes to resin 3D printing, it's not like that.
I hope you don't just jump into resin printing like I did,
where I didn't even realize I needed gloves.
I wasn't even fully aware of all the safety precautions
that resin printing actually needs.
I'm going to be doing another video
specifically talking about the safety of resin 3D printing.
But for the most part, here are the main things you need
to just get started with resin 3D printing.
First, you're going to need nitrile gloves.
Now, you cannot use just latex gloves.
They will not work.
You have to use nitrile.
So nitrile gloves, and I would get a box of them
because you use them every single time you touch anything
in the area of your resin 3D printer.
Next is safety glasses.
Now, safety glasses is a must
because honestly, you deal with this resin
and you never know what's going to happen
and it can easily splash up in your eyes.
And you want to have some type of protection
to block your eyes.
Next is a respirator.
Now, the thing about a respirator is,
if you're sanding, absolutely.
But if you're just printing and pouring resin
and getting into your 3D printer,
it's not a mandatory thing.
Some people always use respirators
because they're very sensitive to the smells of resin.
Resin does have an odor.
Now, I will say some resins have more of an odor than others
but for the most part,
all of the different kinds that I've used in the past,
they all have some type of smell to them.
Another good thing I can't just show for you right now
is a ventilation system.
You need some type of ventilation.
You want this not to be in a closed space
that has no airflow
because that smell of resin can build up
and it doesn't matter who you are, it will bother you.
So you definitely want to put in a place
where you actually can get good airflow.
One person has told me
that they actually set theirs up in their bathroom.
They can just turn on the vent and there you go.
So it's really wherever you can set it up
to be able to have proper airflow,
whether that's in a garage
where you can open the door sometimes
or by a window and keep the window open with a little fan.
Obviously, depending on the time of year and the weather
but ventilation is one thing you absolutely should have.
Another thing is a scraper.
You definitely need a scraper.
Most 3D printers just come with them
but if you don't have one, you need to get one
and it's good to have a metal edge scraper.
At least I like the metal edge scrapers
but some people will actually have 3D printers
that have a mag base
where it's just a magnetic plate that peels off.
That's what my Epax E10 has and it's fantastic
but there are times where I still need to use a scraper.
Also some isopropyl alcohol.
I always use the 91% isopropyl alcohol.
Now this stuff is what you use to clean resin.
It will actually break down the resin
to where you can clean it really well
and this is also what you use to wash your 3D prints
once they're done.
So start stocking up on this stuff
because you go through a lot of it
and when it comes to just using the alcohol,
I also have these cotton pads
and the cotton pads is what I use to clean out my vat
because I don't wanna use paper towels
because that can scratch up the bottom of your vat.
So you wanna use some soft cotton pads.
You could use cotton balls but it's a mess
so I switched to cotton pads
and these are just makeup pads.
Originally I stole them from my wife
but then I just started buying them in bulk
so I got a huge box of these for cheap on Amazon.
Also I personally think it's always a good thing
to have some type of mat or plastic to lay down
where you're actually messing with your 3D prints.
So any dripped resin or anything like that
will actually fall there
and you can easily wipe it up with some alcohol
and keep everything nice and clean.
Me personally, I'm a fan of the silicone mats.
These things are fantastic
and I just buy the extra large ones.
As you see, it's the same mat
that I keep at my desk that I paint on.
When I find something I like,
I just keep buying the same thing
and find different uses for it
but a silicone mat works wonderfully.
So when you're done 3D printing your model,
now the work actually begins
because it's not like FDM
where you just rip off those supports,
do a little sanding and you're done.
With resin, this is when the work actually happens.
So you actually have to take it off,
you have to remove all of your supports
and there's multiple ways to remove supports
and they're, trust me, a lot easier than FDM.
And once you've removed those supports,
then you have to wash it in alcohol
and you're going to wash it in the IPA
and get it really good
because the alcohol will break down
all of the uncured resin.
You want to make sure you do a very good job at doing this
because if you don't,
all of that uncured resin, when you cure it,
will just harden to your model
to where if it's stuck in a joint
and you try to put that arm into that shoulder socket,
it won't fit right
because you didn't clean it good enough.
Sometimes it's the model,
but a good chunk of the time,
it's because the model isn't cleaned enough.
So then after you've washed it in isopropyl alcohol,
then you let it dry.
So then, after you let it dry, it's time to cure it.
And you cure it with a UV light.
Now, how long you cure it
is really all dependent on the type of light you have.
And you kind of got to test it out
to see what works and what doesn't.
For me, I cure my models for about 15 minutes
under a UV light.
Now, the great thing is
there are a lot of manufacturers out there
that have cure and wash stations.
Now, this is the route I went
because I just, I want it easy.
And I don't want to always have to deal with everything.
So what a wash station is,
is it comes with some type of bucket
that you can fill with isopropyl alcohol.
This isn't full right now,
but you see in the bottom here,
there's actually an agitator.
And that will spin and mix the resin
and just kind of slosh it around in this bucket.
But I'm sure you're wondering,
so you just let that thing get beat up
and just at the bottom?
No, you put this in a basket,
it hangs in there while that agitator spins around.
So it really does a good job of cleaning all of your parts.
Then once it's done,
you just pull the basket out
and then you set it aside, let it all dry.
Then there's a plate that you can put into your cure station
and it already has UV lights.
So you just switch to cure
and then you hit the timer
and it will spin around and cure it for you.
But the alternative is you have a couple buckets
and you fill them full of isopropyl alcohol
and you wash them out with a toothbrush
or a little sponge or anything like that.
Then you get a little turntable
and put it with a UV light,
hopefully in some type of little box
because you don't want UV light
just shining everywhere in your room.
Then you put your UV light
and a little turntable in a little box
and you can set your model on that turntable
and that UV light will go
and while it turns around and cures everything.
Then you just kind of have to have a timer
and that's the cheaper way of doing it.
Wash and cure stations are anywhere from 150
and well, let's just say up.
They do get expensive depending on the sizes
but they are very convenient and handy.
For me, even though I have a wash and cure station,
I still use a bucket to wash out some of my parts
because now that I have this EPAX E10,
the thing's massive.
It's got a 10-inch build plate
so it doesn't always fit in that bucket
when I'm 3D printing stuff
so I have to wash it by hand.
So you've gotta think.
If you've got a small printer,
a little wash and cure station
would work just fine with you
but if you have a big printer,
it doesn't always work.
Then once you're done with all of that curing,
it's ready to touch
and you can just touch it with your hands.
It's perfectly safe
but then it's ready for processing
and if you're curious on the things you need to do
when you're processing your resin 3D prints,
I've already made a video showing you exactly what I do
and I'll go ahead and put a link for it
right up here for you
or there.
There, I think.
Then after the processing,
you're free to set it on a shelf somewhere
or actually start painting that beautiful print.
All right, real quick.
I gotta do it.
I just gotta say thank you to all of these awesome people
for supporting me on Patreon this month
and if you wanna be one of my patrons,
you will get exclusive access
to all of my private Discord channels
where we talk about 3D printing,
painting 3D prints,
showing off some amazing works of art
and just generally talking about anything about the hobby.
It's been an amazing community
but you'll also get access
to all of my behind the scenes content.
I show you what I'm working on before I put it out
and I put up Patreon only tutorials
but the best part,
you get to vote on some of the videos
that I make each month.
This video right here
was actually the winner of this month of Resin 101
because my patrons wanted to know more
about resin 3D printing and here we go.
If you're interested,
I'll go ahead and put a link below.
Other than that,
let's get back to this video.
So let me take a minute to just talk about
some of the best use cases
for if you think you need a resin 3D printer.
I'll tell you what,
some of the best things for it is small detailed models.
Let's just say if you play D&D like me,
printing minis, fantastic.
It gets so much detail,
it's unbelievable.
With my 8K resin printer,
it astounds me the level of detail
and you can't physically see it
until you get paint on it
and start seeing some of those textures show through.
I'm very grateful for my resin 3D printer
when it comes to any of those high detailed things.
So when it comes to printing things
that are very small, thin, and delicate,
that's where a resin 3D printer shines.
So printing minis for like D&D or games,
I mean, it's fantastic.
That is really one of the biggest uses
for a lot of people is printing minis.
Printing any kind of highly detailed models,
FDM is great,
but FDM can't get the level of detail
just because of how it prints.
A layer height on an FDM printer,
if you are at 0.08 millimeters,
that's like, wow,
like that's a really good layer height for FDM.
For this, I print at a 0.03 millimeters
and that's what I just typically print at.
I'm pretty sure this thing can go lower than that
but I just don't have a need for it
because of the level of detail.
The layer lines, you cannot physically see them.
When I'm doing my 3D prints,
there are times where I don't have to sand one single thing.
It's just perfect.
I take the supports off and it's good to go.
So that's one of the biggest differences
between FDM and resin is just the high level of quality.
So if you want some high level detail
and FDM isn't doing it for you, resin is where it's at.
Now, the one thing I will say,
resin is a lot more fragile than FDM.
If you drop a resin 3D print, it will break.
But if you drop an FDM, gosh,
I've dropped some of my stuff down flights of stairs
and they're just fine because FDM is a lot more tough
but resin is more delicate.
So you have to be careful with it.
Now, the last thing I'm gonna be talking about
is if it's even right for you.
And I have actually had friends
that I have persuaded them not to get resin 3D printers,
even though they print FDM all day
and they love 3D printing.
And you're probably wondering
why would you tell somebody not to get one?
And it's because of circumstances.
Sometimes circumstances matter more than what you wanna do
because there are safety precautions when it comes to this.
Resin is caustic.
That means if it gets on your skin,
it can actually get you severe rashes or worse.
So you don't want this around
where anybody can just have full access to it.
So the people that I have actually steered away
from resin 3D printing,
they have all had one thing in common.
They've all had little kids
because little kids don't know any better sometimes
and they could easily pick up a resin print
that's not cured and it's not safe for them to touch
and it could hurt them.
So if you have little ones,
you really need to think about
whether you should get a resin 3D printer or not.
Now, the one thing that I will say,
if you have areas to where your children are not allowed
or they don't go,
or maybe you have a room with a locked door,
then yes, resin 3D printing would be perfectly fine for you.
But I would just, I would hate as a father,
I would just hate for some child to get hurt
because they just didn't know any better
and they accidentally got into an area
where they shouldn't have
and started messing with your 3D prints
because in the past, they were allowed to touch them.
But these, they shouldn't be touching them.
Not until they're cured, I will say.
The next is if you don't have an area with good ventilation.
I know I've already touched on it,
but you need to have some type of ventilation.
I don't have a ventilation hooked up
to this actual 3D printer.
My other photon 3D printer,
I actually hooked up a ventilation system directly to it.
I 3D printed a back plate
that I could connect a dryer vent to
and I just turned on my vent
and sucked all the air out from inside it.
But this one doesn't do that.
But this room I'm in, I have my paint booth right here
and I turn on my ventilation system
every single time that this thing is running.
Another big thing to consider is cost.
One of these bottles cost me $44.
That's a lot.
When I can get a spool of filament
for around $17 to $20 a spool.
And I would say they're almost equivalent
of the amount that they print.
But it's hard to give an apples to apples comparison
because a spool and a bottle are kind of hard to compare.
But I would say they're somewhat equal
depending on the prints.
If I'm printing a bunch of big things, I don't know.
Because I can make my big things
on my resin printer hollow
and I support just a couple things on the inside
while my FDM printer will be doing an infill
and just using all of that filament everywhere.
But if you're a person that just kind of has this
as a hobby on the side and you dabble in it
and you don't wanna put a lot of money into it,
this might not be the thing for you
because you gotta get all of this stuff.
All of the alcohol, washing stations,
and gloves, safety glasses, respirators.
I mean, there's a lot that comes with this
before you even get started.
But on the other hand, if you're like me
and you realize you're just going to keep dumping money
into your hobby because you're addicted to it,
then welcome.
Now there are tons of little nuances about resin printing
that can just be annoying.
And I've only skimmed the surface of it
just to give you a basic understanding.
But if you've been resin 3D printing for quite some time now
I'm kind of curious to hear what you guys think
are those little nuances that just drive you nuts.
For me, it's every single time I have a fail,
I have to clean my vat.
That just, it drives me nuts.
So check back next week,
and I am going to be going in depth
about all of the safety precautions
you need to be aware of when you're resin 3D printing.
So I hope this video has helped you
and maybe guided you in the right direction
of resin printing and just kind of give you
a good foundation of what it's really about.
Thanks for sticking around.
I hope you all have a great day
and I'll go ahead and see you in the next video.
