TREX ARMS: AC 1 - Hate is too strong but I still don’t like it.

Ballistic Lab
1 follower
1 Video View·Dec 28, 2025
Supposedly this one is an AC Uno, use that to frame your expectations or biases if you want.
AI Generated·May contain errors
Alright guys, it's the 26th of December.
Just wrapped up doing the 12 days of alternatives to the AC-1, which a lot of people took as
me having a harder stance on this thing than I really do.
I don't hate the AC-1, alright?
It's a serviceable plate carrier, which we'll go through the ins and outs of it in just
a couple minutes.
So serviceable plate carrier, right?
It's an acceptable quality from looking at it.
I don't hate it, and I definitely don't hate Lucas, which did not drive my stance on this
thing at all.
I despise the premise of it, though, alright?
So when this thing came out, it was kind of pandemic, it just kind of was at its peak,
I guess?
I don't know how many peaks we're going to have on this thing.
And Spiritus and Pharaoh stuff was hard to get, I'll admit that.
So when this came out, Lucas had kind of dropped it as the in-source alternative to things
that you physically could not obtain elsewhere on the market, which was just blatantly not
true.
There's hundreds of options of perfectly fine plate carriers out there, many of which are
cheaper, and many of which are more functional than this thing and provide more capability
to the end user.
So $180 for a minimalist plate carrier is not affordable, in my mind, right?
It's not exorbitantly expensive, but it's not low-tier on pricing.
And the feature set on this thing is almost non-existent, alright?
There's a couple noteworthy features that I'll talk about as I go through it.
But my issues with the AC-1 in a nutshell...
Some of the construction is a little suspect, I'm not a huge fan of it.
Whether it works or not is a different story, but I think if you have any background in
actually using the gear, you would see those things and question them.
I don't think it was a needed option, right?
If T-Rex had just come out and like, we're going to make a plate carrier, and then that
was kind of the end of it, I wouldn't have any issues with it at all, right?
But it was overhyped as something that you could actually obtain, and then it sold out
the first weekend.
It was kind of hyped as affordable, not really affordable, and it was just oversold as being
like the one option that anybody could actually obtain.
Which is just not true, and if you look back through the 12 days of alternatives, as well
as some of the user submissions, all of those bar a couple of things that were created after
the fact were available even at the height of the pandemic, and either cheaper or provided
more capability for the same price.
So with that said, I don't hate the AC-1, let's throw it on the table and see what it's
all about.
All right, so I don't want to give the impression that I'm going over or being harder on the
AC-1 than I am other products, all right?
My quality of videos may be a little bit lacking of late as far as really getting into the
details of things and kind of what fits, what doesn't fit.
Hopefully that's not too noticeable or just not true, I'm not sure.
So don't feel like I'm going further in detail on this thing.
Usually if I don't see something wrong with a product, I just won't acknowledge that feature.
So if I point out something on here that seems suspect, that doesn't mean nobody else has
done it.
It just hasn't caught my eye as I've gone through it, all right?
So and I've also taken, I don't typically break part front bag, rear bag, but there's
some things kind of internal on this that I want you guys to see and just kind of where
my head's at.
All right, so first of all, there's no side seam on the AC-1, and this was pointed out
in the original T-Rex video, so they're being honest about it.
It's a different approach to building the plate carrier, right?
All the seam is hidden by the 3D spacer mesh here, which in and of itself is not a huge
problem.
However, you have to consciously center your plate in the plate bag because it's such a
tube design, this Velcro might hinder it, but in theory, you can roll this plate bag
and keep rolling and rolling and rolling around your plate, and you can work the plate bag
so that your plate is actually sideways in there, and we'll see, I don't know how well
this will work, but if we fold this in half, it doesn't quite happen, but you can kind
of see an extreme case.
We could finagle that in there, and over time, it can just, everything can get a little cockeyed,
right?
You can see it still kind of fits in the plate bag.
All right, that's a little nitpicky.
I'm just not a huge fan of it.
The seam just helps keep everything kind of lined up.
The LV-119 may be sewn the same way.
I'm not 100% sure.
I can't remember off the top of my head, but that caught me as a little odd, right?
The seam just helps keep everything exactly where it should be.
One thing that I do like here is the flap being this shape.
It doesn't offer as much protection to the bottom of the plate as other designs.
However, it is a little bit more forgiving when you fold it up.
If you've got a real chonky plate in there, you don't have to kind of tug and tug and
tug to try to line this up the whole way across.
You just kind of pull it down, and you've only got the Velcro in the middle, but there's
still a good bit of contact there.
So it'll help keep that plate pocket closed a little bit better.
Some of the plate pockets, when you've got a full flap of Velcro along each side, and
you've got a real thick plate in there, you can really only pull the center, and then
you have just Velcro hanging out.
Looking at this thing a little bit more, the 3D spacer mesh, I just kind of feel like it's
there.
It's not really wide enough to provide true channeling or anything, I just think that's
kind of where the seam wound up, and they're like, yeah, let's throw some mesh there.
But there was at least conversation of comfort or something.
Looking internal on this thing, the raw edge is kind of apparent, more apparent at least
in recent videos than I've looked at other plate carriers throughout the setup.
And then one concern of me is this corner here is basically unfinished.
Just based on the way this was sewn as a big long tube, when they got to the corner there
was really nothing else they could do.
That is a potential wear point, especially since you've got just one layer of Cordura
there that's raw already and kind of going into a cut corner.
I could see that causing some long-term durability issues that would not necessarily be present
on other options, as well as just kind of the bottom of the plate bag all the way around
is left unfinished.
Is that a huge issue?
I don't know, but this wasn't exactly a budget option.
So for $180, I feel like that could have been cleaned up some.
I also, I should say, I got this loaned to me by a dude named Daniel from his friend
Fong, so I want to give them a shout out.
I don't know for sure if this is the AC-1 or if this is the AC-Uno.
If you buy off on any of that hype, I don't know.
The whole story seems goofy to me, so I guess if you really, really want to favor T-Rex
on this, I guess assume it's an AC-Uno, but I don't know.
Looking up at the shoulder straps here, you've got the, they've sold it as cable routing.
This is a pass-through here.
I don't know.
I just feel like it's unfinished.
There's not really anywhere to route cable other than the bottom of the plate bag and
then up, which doesn't make a lot of functional sense to me.
I feel like they could have just stitched that across, not lost any functionality, and
potentially provided some more durability.
The bright side is, though, the shoulder straps are sewn to the rear of the plate bag, which
is where you want to pull from, versus the front of the plate bag, so you're not pulling
the corner of the plates into you, so that is a small win there.
Color match Velcro.
I don't know.
It's got an aesthetic to it, but again, $188.
I would appreciate some color match Velcro, even if it causes your supply chain a little
bit of extra heartache.
The surface mount buckles are on there.
They look like they're stitched fairly well, but again, it's a single layer of Cordura
there with no backer, so over time, I don't know how well that will fare.
If this was coming from a major manufacturer, I would be a little bit less suspect, because
they've got more experience with it.
T-Rex, this is their first foray into true nylon gear, so I feel like some places, corners
were cut, and they weren't necessarily cut knowingly.
They were just not thought about, so that's kind of the concerns I have with the front
plate bag.
Looking at the rear plate bag, I do appreciate the simple shoulder straps.
It's just two-inch webbing with Velcro and unspecified length on both ends.
They marry up, and then you've got this kind of very cry-style shoulder pad sleeve here,
which you just kind of leave bunched up, attach your straps, and then slide it back over.
I don't really have any issues with that design.
It's a little hard to work with, but it's very streamlined, and I honestly like simple
shoulder straps, so I don't have any issues there.
If I need more padding, I'll add padding later on.
Can't remember if there's cable routing on the back side of this.
Yep, same thing.
All right, so pass-through.
Back plate maybe makes marginally more sense to me.
You could run a body-worn antenna into the plate bag and just kind of let it terminate
in the plate bag if it was an appropriate length, but again, I don't necessarily think
that makes sense.
I think just to stitch that shut, unless you're really selling me that your cable routing
was intentional, it just feels like it was left unfinished.
Maybe I'm being overly hard.
I don't know.
All right.
The rear plate bag, they give you this goofy flap here to cover your cummerbund, which
has fantastic Velcro continuity.
All right, so it covers your Velcro adjustment in the back there.
I don't know.
It feels unnecessary to me.
This Velcro is never going to go anywhere.
This flap, in theory, limits some utility.
If you've got Velcro all the way down, you could do something with it.
That, however, is also not a huge problem.
You just pop that with a stitch ripper and go on about your day if you don't want it.
The shape, I think, really just to me says we wanted to ensure that we could throw it
on and it would fit.
Rectangle would have worked just as well functionality-wise.
However, it would have taken a little bit extra time to QC and make sure that it's sitting
in the right spot.
One thing that I do like about this plate carrier is that they tried something new with
the cummerbund.
All right, so in theory, you've got a pistol cell, an M4 cell, and then a bigger cell for
like an IFAK or something.
I can't really fault it, right?
You either like it or you don't.
I appreciate that they tried something new.
I don't know how well that would work for me because I'm not going to put a pistol mag
on my vest right there.
If it's like on a placard or something, that's a different story, but I'm not going to waste
this prime real estate on a pistol mag.
I either want a radio sitting there or an M4 mag because everything behind that is kind
of just there and I'm going to have to figure out how to utilize it later.
Maybe my arms are goofy, but as soon as we get beyond that one reload on the sides, I
really can't reach my cummerbund very well at all.
I don't know.
Maybe that's a mobility issue on my side or on my part.
It is dual-layer elastic, not great quality elastic.
You can kind of see the cell's a little floppy already.
I don't know long-term durability, how that's going to hold up.
I would have appreciated...
So rifle mags are not a big deal with this kind of open-bottom U-shaped.
Pistol mags, I'm not a huge fan of it.
I'd rather have the cell closed off.
I think I've mentioned that even on the ANA stuff.
It's just pistol mags have a little bit more... with less width to them, they can work their
way around the bottom of that a little bit easier.
I don't know how likely that is, especially if you're not using it for pistols but you're
using it for like a bow fang or something like that.
So I don't know.
Six in one hand, half dozen in the other on that.
I had heard that these don't play well with ESAPI and backers.
So front plate bag, I had the P210.
That's going to fit no issue because it's wafer thin.
Threw in a medium ESAPI and backer in the back plate bag and you can see the plate bag
is totally full and I've got a good bit of Velcro left.
I don't think the flap would fail on me.
There's enough connected in there but it's just a... it's not clean on the bottom.
Now I don't necessarily think that's T-Rex's fault.
Everything I could find, it's not built for ESAPIs and backers.
It's built more for civilian standalone plates but something to think of if you've got some
real thick plates because thick plates are also more affordable.
You may have a hard time closing the plate bag and there's no give on the plate bag at
all because it's sewn Cordura in a tube and if it doesn't fit, it doesn't fit.
So final take on the AC1, like I said in the beginning, it's serviceable.
If you legitimately can't get anything else or can't afford anything else, it works, however
neither of those are legitimate situations.
You can always find something that's an alternative to this.
You can always find something that's cheaper and you can always find something that provides
more capability.
So if he had dropped this thing at let's say like $100, he'd be like, I want everybody
in America to have a plate carrier, here's $100.
By the way, we also sell HESCO plates and here's the cost on them, they're super affordable.
Everyman Plate Carrier, kind of all right with it, right?
You're trying to undercut the rest of the market and just get an option to people.
This in all experience of the probably 100 plate carriers that I've dealt with over the
years feels like a $100 plate carrier, right?
It does not feel like a $180 plate carrier.
I don't think it provides the capability that you would expect from a $180 plate carrier
and that to me is kind of the disappointment is that it didn't replace or fill a void like
it was kind of hyped up to.
So appreciate your time guys.
I don't hate it.
It's a thing, works for some people, if it works for you, don't like run out and get
rid of it.
Also, if you had plate carriers, you shouldn't have run out and bought this because it doesn't
provide you any extra capability.
All right.
Thanks guys.
