Top 5 Must Have Items for the Milwaukee Tools Packout System. ( Mods and Hacks)

Ballistic Lab
1 follower
#milwaukeetools #packoutsystem #organazation
Here are my top 5 Picks for why The PackOut System is the best.
All right. So I've got something exciting for you.
What I'm going to do is my top five pack out minds.
Now I'm going to warn you if it looks like I have Tourette's or some type of
involuntary arm flaring, blah, blah, blah. It's the flies.
I don't know what it is about it. They're attracted to me. I must smell good.
So apologize for that. Let's get that out of the way.
So I'm gonna give you my top five. You don't have to agree with it.
You don't have to like it,
but I'm going to give you as much information in this video and in the
descriptions, you can find this stuff too. So top five. So number five.
Now what I want you to do, I'm going to pause you,
go in and start commenting and start telling me what your top five are.
And let's see if we can, you know, align on something. All right.
So number five, it's brackets and cleats.
And right here I have a plethora of brackets and cleats.
So there's the Milwaukee bracket, the packout bracket.
There's aftermarket brackets, all these nice little brackets.
There's some cleats over there. I'm going to show you, but what I do,
what I like about the bracket and cleat set up, right?
So this is one from rainbow and speed. This is a piece of, well,
we had a powder coated for a Jigscrolls Jeep,
but it's a powder coated steel and it works with all of them. Milwaukee
just like the packet bracket does. And you can then weld this bolt,
this whatever you can get a lower profile than the Milwaukee one.
It's pretty sweet. Got them in aluminum as well.
Same concept. Packout bracket locks in, attach it to something.
You can also mount some of the stuff that requires a little less weight with one
of these using the back and you can also hang crates on this and that's pretty
sweet. I'll show you that. So here's a crate
and here's your bracket.
This cleat goes on the wall and then you can have a much less expensive way of
mounting than buying the Milwaukee full size one.
So this cleat is pretty sweet. We did this for Jigscrolls Jeep as well.
This is going to go on the rear tailgate.
Now if you've seen any of my other videos, I have brackets like this.
This is for the passenger compartment of my Raptor and I put this,
if I flip the seat up and I want to put a stack inside the cab,
I can put this down and with this wider base and the way it wedges in there,
the packouts don't fall, hit the windows, fall forward, hit the seats,
any of that stuff like that. So this is pretty nice little setup because of the
way this bracket system works. You can attach these to walls,
studs. They've got 16 on center, sideways or vertical,
horizontal. Good to go. Uh,
if you've seen the Raptor and the bed,
I have two of these on a piece of pressure treated plywood that's been a Raptor
line to make it a little more durable. So yeah,
brackets and cleats. That's my number five. Hold on.
But wait, there's more. There's other guys out there.
This is from Stack Smarter.
This is a plate that clips it into packouts that allows you to then use the
VersaStack T-Stack setup. You can see there,
that's just clipping into the packout bracket, but I can come over here.
I can come over here.
I can clip it onto my packout stack and now I can clip a VersaStack or a T-Stack
on here. Now the cool thing about this,
this is one of his prototypes that he first did is he also has a plate that
could take T-Stack and VersaStack back to packout.
So you could have a set of the drawers in the middle and then go back to
packout. So this bracket and these, these cleats are amazing.
And speaking of cleats, here's another example.
See I have two of the 3d printed cleats that I map here and this is sort of my
universal take into the house, take back to the barn pile.
The way the brackets sit on the back of this crate. There you go.
And I put all types of stuff in that.
And these are just some inexpensive 3d printed cleats that we sell.
I think it's a,
it is an electron Smith design and you can see two screws per bracket.
It's thin little plywood, but it's never failed.
I think it's a pretty sweet little setup and that's definitely one way to hang
it. Like I said, that's an electron Smith design, Benjamin Johnson.
So that's, that's the brackets.
So let's go ahead and see what number four is. Oh,
I didn't see you there. Don't forget.
Feet, the foot design from Milwaukee,
I'd say is pretty amazing and deserves to be on this list because of it.
The way stuff locks into each other is one of the reasons the systems as strong
as it is and as good as it is.
And with the 3d printed community and the CNCs and all that stuff you can do
with these 3d printed feets. Amazing. This is one,
the cross section off of one of the backup kits that we have,
but this was designed by electron Smith. He's got,
there's some other ones out there. This is a design of ours.
It's a basic one and this foot lets you do so much. I mean,
literally here's my drink. Let's move it out of the way.
Here's a cup holder. This is an electron Smith design.
This locks right into the packet. Oh wait, my battery didn't fall.
You wonder why? Because it's in a 3d printed bracket.
That's on a 3d printed locking foot right there. Put the bracket in,
lock it in place, grab your battery. Boom. This thing, what's that?
You ask. That's a 3d printed bin with a foot on it.
This bin actually is made to go into one of the thicker packouts and then you
stack another packout bin on top of it.
But this is so that you can put your hardware and carry it around with you and
not have this bin fall off.
You can take this whole setup over your packet and lock it in.
What else can you do with feet? Well,
you can get, if you didn't want to wait for Milwaukee to do it,
one of the kits that Ben designed that we sell, the backup,
what do we call it? The backup packout kit.
And this lets you take the back of the wet dry back out and put it on there.
Now Milwaukee, finally, actually, when I first recorded this video,
which that footage got lost, but when I first recorded it, it wasn't out.
You know, Ben and I worked together. Ben, mainly me,
just sort of the monkey in the corner with a couple of hammers and some duct
tape. This is a 3d printed kit.
It goes right on your M18 wet dry back with a latch,
some O-rings and all that other good stuff that you can put right on your wet
dry back and have it back out compatible in it or pack out.
I was showing you 3d printed feet.
So with some of the 3d printed feet that we sell, I printed some off,
I attached it to a board and this is my Kreg pocket hole system.
So when I go to a job and I want to have a workbench,
but I don't want to set it all up for that.
I don't want to screw to the table or whatever.
I put this on top and now
I've got a nice stable place to drill holes and when I'm done with it,
I can pop it off, put it in my vehicle or I like to keep it on a shelf.
The 3d printed feet. We also work with stuff like,
there's a locking bracket for an M18 battery.
Just about anything can be attached where these brackets go.
If it unscrews, we've got 20 ounce.
We've done some for getting tumblers. I'm working on a battery,
not a battery, a magnet holder and a couple of other things.
So that's why I love the 3d printed feet and that's why I love the foot design
that Milwaukee came out with.
The locking system on the tough system and now the tough system too is not going
to let you attach stuff like this without a plate and I just don't think you can
beat this design.
This is amazing and it lets you do a lot.
So that's why I put feet on this list and that's why that's number four
numero trace three amigos.
What is it going to be? What did you guess? Did you put it in the comments?
I hope you did because my pick for number three is the rail system.
Now the rail system only comes on the big bottom unit and the intermediate.
Okay.
But this rail system and uh,
if you guys haven't heard of packable tool,
he's like the OG that made accessories for this rail system.
This is one of the first things that came out. This is called the cord Cobra.
It's like a carbon five and carbon fiber reinforced printed part.
He 3d prints these. He actually is working on CNC ones.
He does a lot of other CNC stuff. Uh,
and he's been upgrading all this stuff so that there's a couple of different
versions. But these things are amazing.
There's a video he has where he's taking like a small mallet and he's smashing
these things to see how easy they break. They're pretty strong.
So I got this from packable tool. Uh, guy's name is Alex. Pretty awesome.
There's a bunch of different things that go onto this system, right?
So again, we said cord Cobra, that's one. This right here,
it's holding my level is called the level lizard in 3d printed.
He's got new versions that are aluminum that I believe are already out. Uh,
but speaking of aluminum and then this rail system,
this bracket here is called the Joey.
And if you remember me talking about brackets and cleats,
I've saved this separate for this rail system because of the stuff that you can
do with this. So he's not modifying this rail at all. In fact,
these ones are set screws and you just slide the rails out,
slide the bracket on, slide the rails back in,
put your set screw on and what does that get you?
Let's you take something like this crate,
attach it to the front and now you can stack a whole nother setup of packouts.
You can fill this with some chemicals, buckets, you know, gallon jugs,
whatever you want. And you can, instead of having a super tall packout,
you can go like that.
Now I've seen some torture tests of this of people putting a little toddlers and
things on that or stacks double wide, triple wide, you name it.
It's it's strong. This rail system is stout. It's not going anywhere.
So that's a, this is a great design from packable tool. In fact,
all of the ones on this rail system on number are from packable
and they're just, they're just some awesome stuff.
So this rail system made it to my number three because the ability that this
gives you, there's a guy out there called Cooper's customs.
He makes a CNC, but actually I think his stuff is just hand machine,
not a CNC that clamps onto here to do a cup holder.
That's one of the first things he did.
If you hold one of those really big Yeti mugs he,
he also has some CNC level holders and tool holders like that use the little
belt hook that comes on the back of the drill on the side of your drills.
You can put a tape measure or a drill hanging off of it.
And those things being CNC, those things are really strong.
So the rail system, I love it.
And I definitely think it's worthy of being on this list.
Let's move on to the number two.
This is Fred. Fred the fly. Fred likes to get freaky on Friday.
He's annoying. All right. Numero two. Dos.
That's four, but two, Pete, whatever. All right.
So you guys should have put this in the comments.
I should have seen this already, but the bit bin,
the bit bin is almost the best invention I've ever seen for this pack-out system.
And you say, what is a bit bin? Well, let me give you a history.
See that fricking fly. I could see it. So Milwaukee shockwave bit sets.
Okay. There's a couple of different kinds, but as you can see,
shockwave bits. So people buy these,
they then throw this inside the big pack-out and it looks unorganized.
I've seen a couple of people take some of these and open them up like this,
cut the tabs off and take the bins out and put them in here.
And they look awesome. That's sweet. It does the job. It's nice and organized,
right? But there was a inventor out there. His name is,
his name is Benjamin Johnson,
but he goes by electron Smith who designed a bin based on this profile here
that Milwaukee has in this shockwave bit set.
And this profile with these nubs allows him to take stock size.
These ones, not these ones,
these come from somewhere else and fit them inside of a bin.
And that bin looks like this. So this is a bit bin,
and this is a standard rectangle. We call it, and it's a V2.
And what this bin allows you to do is Mount bits and you can Mount the stock
Milwaukee bits, which is deep.
And these are ones that I actually sent him a picture of and said, dude,
you should totally come up with something like this. And he did,
but he does so much more, right?
So this is a locking T shank jigsaw holder, right?
And what this allows you to do is put it in here.
So instead of using just Milwaukee bits that come in the shockwave cases,
he designed this and then you slide this little tab over and now they're locked
in. He also designed,
so if you don't want to buy the whole shockwave bit set,
the actual 3d printed holders, which looks like this guy,
and this can go in either the Milwaukee one or it can go on the ones we print.
He also then doubled down right here.
So here's the jigsaw one with the little slide.
So he doubled down and released these in a file format called OpenCAD and that
allows you to customize it, which we have done and so have others.
So this is sort of like a couple of design iterations that we've done.
And what we did with this is redesigned
SDS bit holders. Everyone kept asking us, do you have SDS holders?
Do you have to get, yes we do. So here is a lot. It locks into place,
but it pulls out, goes in, rotates down. It's out of the way.
The 3d printed holders. See,
this is a Weha set of nut drivers that fits in double stack,
right? So he, with the OpenCAD,
you're able to design a whole bunch of different bit holders. Now,
I then said, I want to do router bits.
And what I did was customize the one for quarter inch
bits and just made the slot square and there's a router holder.
And then I made a bigger one for half inch bits. And here in my router bit case,
this is what this is. I was doing something like that for all my bits.
And now I can do something like that.
And when I'm working,
I can come out here and go like that and I can have them all and I can pull them
out and I can say, Oh no, no, I want this one. And I can pull it out.
Put it back up. They stay in there. They're not bouncing around.
They're not running into each other. So boom. All right.
There is a way to organize stuff and these are
customizable. You can customize yourself. We sell a bunch of different sizes.
We sell seven sixteenths for your big auger bits.
We sell half inch for your router bits, quarter inch for your small router bits.
Here is just what we did was took a shockwave bit.
We opened it up and we pulled all the guts out and we just put it in a bin.
So this is one of the titanium with the double side. People always ask us,
I want to put my drill bits in. I want to put my drill bits in. I said, well,
if you have the shockwave set, you can literally just take that set right out,
put it in here and you've got a nice little bit set up.
This is one of the spade or paddle bit sets that Milwaukee did that I threw
together inside of these bins and put it in this half profile.
I also have
more of a robust one that has spade bits.
It's got a bunch of my countersinks in the Milwaukee one.
It's got my jigsaws. It's got the version two,
which these things are sort of a predetermined set up.
Can't adjust the position of that. So this,
this bit bin that Ben designed allows you to do so much and then he expanded on
it.
I was talking to him about it because a lot of people want to put bit bins in
the sticker pack out. So you've got your bin and if you put two together,
they don't want to,
they don't the bottom doesn't like to go in there because of the thickness of
this rim and it's not the same height as one of these bins.
So he came up with, I sort of threw a name out there.
You call it the bunk bed, right?
So this bin goes in place and then you put another bin on top of it,
whether it's a Milwaukee one or one of the ones that we print and you can then
get it to seal your leg and it locks in place. Well,
what does that allow you to do?
So here is one of the big daredevil bit sets with the big boy in it.
All right. So that's an inch and a half. And with this, it has three rows.
Okay.
So that paddle bit can go all the way down and touch that.
And then I can put this one in the top and it'll clear.
And now I can have a big old paddle bit set in here.
So my nut driver's on top and there is a complete pack out and a complete
that is one way to do it. You can get with these bunk bins,
you can get six bins in here or you can do something like this where you've got
hardware, nuts and bolts in this side, screws,
and then all your drivers and things like that for your common job that you're
doing SDS. So you can have tap cons in there,
not drivers for your tap cons, HVAC.
You can have fittings or you can take that out and put capacitors in there.
You name it.
So this pack out set up with this bit bin has just allowed so much
customization that, I mean, honestly, you can't shake a stick at it.
So that is why the bit bins is my number two and a number twos are good.
So let's go on to number one. I hope you get this.
All right. Number one, numero uno,
the big hacienda, the best,
the number one thing that I like for the pack out system.
This stuff is the cat's meow.
It makes everything that you do in a pack out that much better.
You can do amazing things with this stuff. You can cut it.
You can saute it. You can, what the heck?
You can organize it. It's Kaizen foam.
Kaizen foam. You can do so much with this foam.
Let me show you what you can do with this foam.
Here's a piece that's cut out, right?
And this is cut out for a socket set. Okay.
So here is a craftsman socket set that you wanted to put in a pack out.
Kaizen foam cut this out, right? The right side is the left side.
This allows you to take the bins out on this one,
stick this guy in and you get a knife and you customize this to fit any of your
tool. Okay.
So if you want to take drill and lay it on a piece of Kaizen foam,
you get a marker, trace it out. You've got it.
Now this one I would do in a thicker one, right?
But you can do so much more with it. Here's one that I did.
My PEX set up and this little doodad, right?
This is the M12 open or PEX expander,
piece of Kaizen foam cut out to fit the dyes,
the device itself. And then since I had so much more of these that I want to,
cause this is what I actually use the most when I'm doing this.
Cause I like to keep my pipe held down because nobody likes a pipe that's just
flapping around. So I've always got tons of this,
some lube for your tip because you got to keep these tips lube here where
they're smiling. I can see that.
But here's a pack out that I want to have everything where I want it when I
need it. And I don't want to go looking for it, right?
So I actually have a little 3d printed bin for that.
I've got some of the extra fitting or expansion couplers,
whatever you want to call them, valves.
So if I real quick need to replace a toilet valve or something like that,
I've got them in there. Clamps for my pipe, for the PEX, the gun.
I can come over here, go like this, close it up.
And I know that my tool is protected. It's safe.
Cause you got to keep it safe. You've got to wrap it up in something.
So the Kaizen foam lets you do all that.
You can get this stuff in different thicknesses, but here's a thicker one,
right? So this one's perfect for something like this. M12.
You can lay it down on here. You can trace it out.
And now you've got a way, which if you look,
that will easily fit in there.
And there's actually space inside the pack out.
You grab the standard thickness,
take the bins out underneath that.
So here you can see when you order these from Kaizen foam,
they're set up to fit right in there. And there's a gap,
which gives you more room. And now you can set this thing in here, trace it.
You can plan ahead and put spaces for batteries or spaces for batteries.
And with this stuff, the foam, you know,
your tool is protected because it's in that foam and it's padded.
And obviously the pack out is pretty damn durable. The only thing,
the only way I've ever broken one of these before is that I said it was pretty
durable on a video once. And I had it open like this and I threw it.
And one of these corners hit the ground and broke.
I have seen BCG throw these things off a roof like this, you name it.
And so far I haven't seen them break like this.
I'm sure this clear plastic lid is probably the easiest to break part,
but you know, with a piece of foam in a box like this,
that that drill is going to be nice and safe.
They make a Kaizen called a Kaizen cut kit that has all of the tools that you
need to be able to cut out one of these.
You can also just use a standard knife and a hot iron to flatten the bottom.
I've got some of that somewhere,
but Kaizen foam definitely the number one,
the stuff you can do with this Kaizen foam, the customization, uh,
the customer and we're back.
All right.
So I needed a knife because I wanted to cut something.
Actually this is just a piece of scrap Kaizen foam.
And this is not the knife you would use,
but a sharp knife you can cut right into this stuff.
This is a one that I was testing, right?
This is the profile of a rasp that they have or a file that you use to file out
these to flatten this.
But you can get Kaizen foam in a ton of thicknesses as you can see.
This is meant for your standard profile packout.
These are meant for your low profile packouts.
These are actually meant for the thicker packouts, uh,
that don't have the clear lids so that you can really customize a box and you
can just do so much. You, you get a knife, you get your phone,
you trace it, you come in here
and you get yourself a hole that you pretty much just get your finger under and
you dig it. And then if you had it cut everywhere,
it pull out and whatever shape you have cut out,
you just dig your finger down and you only usually want to cut based off of the
depth that you plan on pulling out
and you then take your finger and just start clearing the hole,
which sounds interesting, but you know, whatever. So there's a hole.
So this Kaizen foam, because of the way it rips out like that,
you can set your depth and because it cuts and holds a line pretty good.
I mean, you can see how crisp that line is. You can see how crisp that line is,
but because of the way this stuff takes and holds a line pretty well,
you can really customize your packout.
And what I also like about the customability of this foam is that look at this.
If I had this in my toolbox and this was empty,
I'd know that I'm missing the entire socket set. My big pecs one,
if I have that in there and it's empty,
I know that I'm missing the dyes or one of the batteries.
So having this allows you to do what some people call a five S or everything in
its place. Everything has a place in everything in its place.
And that's what I like about organization.
That's what I like about the packout system and that's what the Kaizen foam lets
you do. It actually, Kaizen foam works for almost any toolbox.
You can get this foam and just sheets and put it in your toolbox at home and
customize it.
But because of the endless possibilities of customization that you can do with
these because of the thicknesses, because of the colors, right?
Because of they've got ABS layers to where you can make these stronger and lift
them out. They're called lift out layers because of just all of the combinations
that Kaizen foam has for this setup. That's why it's number one for me.
I love what you can do with it. I love being able to keep stuff organized.
In fact,
you can see I've got a lot,
a bunch of uncut foam because I've been too busy keeping you guys supplied with
3d printed stuff and I need to spend more time tracing out some tools,
but I've got time. Like I've got a hole in my head.
So I hope you all hung around. I hope you all agree with some of my stuff.
If you had some better options,
I certainly would love to hear some of your,
your top fives for the packout system.
Certainly if you are not a Milwaukee and you don't like packout and you have a
tough system, you have the Fez tool, the sustainer, you have the T box,
the L box, the whatever.
Drop your ideas still below because customization, uh,
it really applies to just about anything. You customize the toolbox,
you customize the packout, you customize it.
You can carry that stuff over to other systems.
The ability to organize your tools, have everything where you need it,
keeping it safe, keeping it secure is what I love about packout.
It's what I love about any honestly toolbox system.
And I think the packout gives you the most options.
And these are my top five that I go to when someone says,
I'm getting a Milwaukee packout, what should I do? I list down these things.
You should get some Kaizen foam. Number one, number two,
you should get some bit bins because if you've got bit holders, sockets,
jigsaw blades, SDS, you name it, you can put it in there. Number three,
the rail system. You can get the cork Cobra, no more tangled cords.
You can get the level lizard to have your level outs on the side.
You can get the Joey to where you can Mount stuff onto the front of it.
That thing is awesome. You can put some of the locking batteries in,
you name it. You can do some great stuff with that.
Then get some 3d printed feet and some plywood or some CNC feet from a
Kaizen.
Get some of the feet and attach it to a board and build yourself a workbench
out of packout. Heck, there's a couch packout.
It's amazing what you can do with the packouts and the feet.
And then get brackets, put brackets on your wall in your garage,
get yourself some crates, put all your chemicals, your cleaning supplies,
you name it. Brackets on the wall, hang your packout stuff stays up out of the
way. You got a designated spot for a bin or a packout or you name it with a
bracket and you'll know where to put stuff. When you walk in there,
and you're changing jobs in your vehicle, your work vehicle, you name it,
the bracket will hold your packout from tipping over.
So this is, again, I said my five,
I'd love to see what your five are and I appreciate you guys all watching.
And, uh, well I'm the Jake of all.
And this all tells us to pack out.
Thanks again, everyone.
Welcome. All right. I'm probably going to edit all that out. Blah, blah, blah,
blah, blah, blah, blah, blah, blah.
