How to Make A Captain America Shield from Wood!

Shielded Dynasty Network
2 followers
3 Video Views·Dec 23, 2025
I created this wood Captain America shield wall art that I created with a $15 table round (no vibranium required). This is a great do it yourself project for your room, and I will show you every step; from how to cut out the circles with a Dremel tool, to how to apply Minwax stain!
I'm going to show you in this video how to turn this $15 table top round from Lowe's
into this Wal-Mart Captain America shield. DIYers, assemble! All of the materials that you will need
for this project are listed in the video description below. Just know that you can
buy these items from Amazon or from your local hardware store. You just want to make sure that
you're shopping around and make sure that you're getting the best deal. All that to say as well,
there are a couple creative decisions I made with my shield. The first one, and I'll cover this in
detail in my video, is that I decided to actually cut circular sections into my shield to give it
more detail. I did this because a lot of the Captain America shields that I saw did have some
sort of detail here, but I also did that to help contain the stain that I used for the shield. Now,
the reason why I chose stain over paint is, as we all know, paint only covers up the wood grain,
but stain actually embeds in it. And I wanted to use a special method I've used in the past on
furring strip American flags to really enhance that wood grain look. And I'll cover that in
detail in the video as well, but you essentially burn the wood grain with the torch. So by far the
most difficult part of this project for me, and we're talking like Thanos level difficulty here,
this is the worst boss to take down, was trying to cut the circles into the shield for that
definition. Now, I thought of a lot of different ways to do this, but this is the process that I
finally settled on. The first step of that process was I sat down and I looked over some scale
drawings of the shield. I'm working with a 24 inch table round, so I had to make sure that the circles
made sense and were to scale inside that table round. From several of the scale drawings that
I saw, I just decided to settle on a two and a half inch thickness for each of the rings,
leading up to that blue section in the middle that would take up the extra space that was left.
So when I sat down and I crunched the numbers, I have my numbers jotted down here. Dark art of math,
but this is a Marvel video, so we're not we're not using that here. I ended up calculating that
the first circle I would need needed to be 19 inches in diameter, the second circle needed to
be 14 inches in diameter, and the third circle needed to be 9 inches in diameter. As I thought
this through a little bit more, I realized that I was going to need to use a tool to be able to cut
these circles out. The tool that I decided to use was my trusty Dremel. If you notice on this Dremel,
with this guard, I needed to actually get from the center of this bit out to the edge of the guard,
accounting for the diameters of my circles as well. A quick measurement told me that this was
an inch and an eighth dimension that I needed here, and I needed to double that for both sides
of the circle. So that looks like two and a quarter inches that I also needed to take into
account into the diameter of my circles. So my final diameters that I used to be able to cut my
circles into my tabletop round were 16 and three quarters, 11 and three quarters, and six and three
quarters. Probably the most useful part to me, and I hope this is useful to you.
Instead of doing this as a one-off type project, I wanted to make some templates so that I could
do future shields in the future. I'm not looking to sell these at all. Marvel, please do not come
for me. I know that Disney owns you. I know you're protected with your copyrights. I don't want that.
I don't want to fight. No. Anyways, all that said, I used some foam board here, three dollars from
Target. It took two pieces of foam board. I did try the trusty string on a nail method where you
mark the center of the circle. You put that nail at the center. You then measure a piece of string
out to be as long as you need, and you would tie a marker or some sort of pin to the end. Draw that
circle while holding that string tight, and then cut that out with a box cutter or scissors or
something like that. I was terrible at this. I could not make that work. I had a very difficult
time trying to hold everything and keep that string tight. I actually found a video, and I'll
link it in the description as well. This is not an Ethan Parker genius idea, but a piece of wood
with some clamps with a screw on the end and then some marks to show where you need to position your
pencil in order to draw that line worked like a charm. It was amazing, and I would definitely
recommend this method to anyone. What you do, this is the smallest circle or one of the small circles.
You put your mark in the center. You put your nail on that, and you just use this to scribe around.
What this allowed me to do was avoid my problem of keeping the string tight because this is a
hard surface. I was able to go through and cut out my circles using that. Once again,
use this to mark where the edge of the circle would be. Then I used a box cutter and went
around very slowly and methodically in order to cut this out. I don't have Howard Stark levels
of money. I don't have Tony Stark levels of money. I've got to work with what I've got,
and that looks like a box cutter. After cutting out the circles, I took my tape around,
and using a tape measure, I marked the center of this circle. That's 12 inches down, 12 inches over,
and that's actually right there if you can see that. By adding in this detail around the star,
I was able to help hide that little indention, but I made a very small hole here so that I could
actually pin my table top rounds into, or my foam rounds, table top rounds. I actually used a
small nail and positioned those like so, pinned it down, and you'll see in this video, I put a
piece of wood across the top and clamped it down in order to be able to use my Dremel to cut out
the grooves. Overall, I'm very happy with how that turned out. I would recommend that to you
as a method to use it as well. I cut pretty straight lines for trying to cut a circle out of
wood. So moving on to the star, which could be the most important part of the whole shield.
What I ended up doing here, I found a star pattern, and I'll put a link to that as well. I did not
come up with this on my own, but I'll put a link so you can find that star. It's a scalable star
so that you can actually make it fit whatever dimension you're using, you know, for the
diameter of the shield. If I can learn to talk, I'll be doing great, but I cut this star out of
paper with my amazing scissor skills. But anyways, once again, putting a hole in the middle,
and that let me line that up with the center of the shield. I then traced around the edge
using a straight edge to make sure that I had straight lines. Once I had that done, I was able
to take a piece of wood, lay that across several of the lines, so two lines at a time, and then
use the Dremel to cut that out. Just once again, cutting through the marks that I made, and that
made a really nice star pattern for my center. To make those really thin lines on the inner of the
star, the inner part of the star, once again, struggling to talk, but you guys know what I mean.
I'm just so excited about the shield. All I did was take a straight edge and a box cutter
and just slightly score the interior so that you have that nice detailed look inside the star itself.
So now we get to move on to the staining portion of the flag, which is probably one of the most
stressful processes. This is not a, I can do this all day type moment. I did use pre-stain,
once again using Minwax stains like I've used on past projects. I used water-based stain.
I used the water-based pre-stain from Minwax as a base, following the instructions on that can.
I also used three colors of stain, and I'm going to pass those on to you. I used the crimson
water-based stain. They also have a new type of stain out there, and this is the type that I use
that have a higher solid concentration in order to give you more vibrant colors. So I did go out
and get that stain, but the colors I used were crimson. I used a gray pre-mixed stain from Lowe's,
and I used denim blue. These are all the colors that, with the exception of the gray, that
Minwax itself will recommend to you if you're trying to do a flag project. So I just had those.
I did have to use the Lowe's mixing services in order to create the crimson and denim blue colors
because those aren't pre-packaged colors. All you do is get some clear tint base, take it up to the
counter, and ask them for those colors, and they're able to mix that for you really quickly.
So I was able to work in small sections of the flag to get this stain applied. I was doing this
very small. I was following the instructions on the can, so that meant that I was doing two coats,
waiting around an hour in between both coats. But you put the stain on, you let it dry for
the recommended amount of time on the can, and then you wipe off that extra stain, and you come
back an hour later to put more stain on over it. I did do two coats of stain on the red and blue
surfaces. I only did one coat of stain on my gray surfaces because I felt like, you know,
with the help of my wife, that might make the shell too dark. So I did do that. I decided to
use gray over white, and if you did want to use white, you could just use the pure white that
Minwax recommends for their flag projects. I did decide to use gray because that's more of
the cinematic shield look, but also if I did get any sort of stain bleed, I realized that the gray
would hide that a little bit more. I am planning on going back and making another flag for someone
else that will use the white stain, but just know you have some options. If you're looking for that
classic look, pure white will get it for you, that pure white stain. But if you're looking for more
of the cinematic look, that gray will do that for you as well. So after I got all those coats of
stain on there, I went back in and I took... this is the only part that's not a water-based stain.
I used a dark walnut oil-based stain that I had left over from Minwax to go around the interior
circles that I had cut out with the Dremel. I did that, and I chose to use that oil-based
stain because it's what I had on hand that was a darker stain. I talked with my, you know, my
assistant, my wife. I talked with her a lot about if I should just go back through those grooves with
the color of the ring that was closest to it, and what we decided on was to give it that added
definition. I did need to use a dark stain. I didn't want to go, you know, with a full-on black
because these areas are so tight you can't wipe out that extra stain. So what you put in
there is what it's going to dry as and what you're going to get. So we decided to go ahead and go
back in with the stain we already had. The stain that we knew would not dry super, super, super dark,
but would still give it some detail and showcase the grain inside of those circles. So now we're
reaching probably my favorite part of the whole project. You know, you don't have to be Captain
America fighting in World War II against soldiers with flamethrowers to get a little bit of fire
damage on your shield. You only have to use the Japanese method of shu shugi ban, and I'm probably
not saying that right, but all that to say it's the Japanese art of burning wood. Typically with
that traditional method you're absolutely charring the wood, but here you're only using it slightly
to help enhance that grain. So yes, you stain the wood first, then you're going to use a torch and
actually go back over that stained wood to help draw out the grain, and it actually will change
the color and enhance the color a little bit. Now what you're going to notice is I worked on the
back of the shield first to make sure that I had my torching methods down because I'm a little bit
rusty, but all that to say you just want to test it out on a sample piece of wood first. Then you
want to make sure that you're holding your blow torch a consistent distance from your from your
surface that you're torching. 12 inches is probably good, but once again it's one of those things
where you're just going to find out as you're going along if it's too close or too far in.
Just remember that it's better to be farther out and have to go over it multiple times and
absolutely send your wood from the start because you can't go back from that. Once you have that,
you're not going to sand down that wood and redo it. So just take it slow, get it right the first
time, and just proceed like that. But just go back and forth over the wood with the direction of the
grain and you're going to really see those grains begin to pop in the wood and add a nice color to
it. I did go over a couple spots with a little bit more time, a little bit more focus because I
wanted to actually have the shield be battle damaged. And that's actually one of the great
things about doing the shield this way with stain instead of paint is that you can use this wood
burning method to give your shield, in my opinion, some more authentic look. You know it's not going
to look like that Marvel Legends shield straight out of the box for a hundred dollars. This is
going to have some character to it and you can make up your own stories about how it got that
character. So after I burned the shield, I wanted to go ahead and protect that. So I grabbed a can of
clear semi-gloss helmsman and sprayed that over the top of the shield. The main reason why I'm
using an aerosol spray instead of brushing it on is because I don't want my colors to bleed.
So by using this spray canister and doing it in small layers, I'll be able to prevent that bleed
from happening over the shield. Here I am just spraying on the helmsman making sure that I'm
doing nice thin layers and making sure that they overlap. I did three layers and I'm also making
sure that the shield is flat so that the extra polyurethane doesn't run down the face of the
shield. You're probably wondering how do you hang a Captain America shield on your wall? Well in my
case, I'm going to be using my trusty Command Strips. I've had good luck with them. Once again, not sponsored
but I have had good luck with Command Strips in the past. I'm going to put a couple extra on it to be
safe. The shield probably weighs close to 10 pounds so it's substantial but I'm sure that these will
hold it no problem. You're going to see this forever on my left. Lame Captain America joke.
I'm going to hang it right back there on the wall so you'll be able to see that in future videos if
you if you decide to subscribe, like, and comment and stay tuned for you know future DIY projects
and things that are going on. So now you'll know the story of how I made my Captain America shield
and why it's hanging there on the wall. Thanks!
