How to Build a Viking Shield | Woodcraft 101

Shield of Antiquity
8 followers
10 Video Views·Jan 13, 2026
Who wouldn't want to build a Viking Shield? I really enjoyed this project and had a great time learning about Viking Shields, Viking Armament, and Norse history. It was interesting to learn that softwoods were often used and that the thickness was usually around 1/2 inch (13mm). My shield was 31" in diameter and weighed 9.7LBS
Materials Used:
Shield: 1/2 pine
Handle: 2x4 pine
Linen: white bed sheet
Edging: Rawhide & Rawhide lacing
Shield Boss (center): 10"d 18g mild steel
Stakes: 1/4x1/4 mild steel
Does somebody want to shoot an arrow at me?
Right.
Does anybody have a sword with them or an arrow or something?
Bat?
There's a little bat over there.
I don't have cable TV, so a show that I recently got into is called Vikings.
I really enjoyed it. It was an awesome show.
And that led me down a path of researching Viking history, mythology, armament, everything about them.
One of the things I thought was really cool were their shields.
I thought it'd make a great project, so I went ahead and built one.
Now, a couple things that really surprised me in making this shield was the thickness.
Like, I expected the shield to be at least an inch thick, maybe an inch and a half thick.
And they're not at all.
They were a half inch thick, roughly.
You know, pretty light.
The overall diameter of them.
Most of them were, you know, 32 inches in diameter.
Some were smaller.
Some were a little bit larger.
And then the different materials they used.
They would either wrap the face of it and the back of it with a linen or a leather.
And the edging.
Again, they'd wrap it in rawhide or leather.
I mean, a lot of cool, interesting facts about how they made these shields.
So, I had a blast with it.
It was a ton of fun.
With this particular shield, it's 31 inches in diameter.
I wrapped the outside with rawhide.
I also used rawhide for the lacing.
I've got linen on the front and the back.
The center is a piece of metal that I shaped up over at the motorcycle shop.
And then the little nails are spikes that I made over at the shop also.
On the back, it's got a single one-piece handle that goes across the boards to add strength to it.
I carved, or burnt actually, some ruins into the side.
And did a little raven up here.
It just sort of seemed like it would fit, right?
I don't really have any other reason for that.
But it's pretty cool overall.
You know, it's fun.
And maybe I'll find a need for it. I don't know.
Please like and subscribe and leave comments.
I love comments.
Stay tuned to watch how I built my Viking shield.
Our shield's gonna be 30 inches, about 30 inches in diameter.
Cut this down, join these up.
So if you've seen any of my other videos, you know I love using the domino machine.
But, as you're about to see, I am still finding new ways to screw it up.
This was laying up here before I put those X's on.
And look, it doesn't line up.
What the heck? Ridiculous.
Now these lines I'm putting on here are telling me the location of the dominoes across all the boards.
That was great.
What I neglected to do was put a marking on showing the orientation of the boards to each other.
I started doing that after the glue up.
Mistakes were already made.
It was a little too late.
Lessons learned.
See, I had this flipped because this nut was down there.
My Viking shield is coming along great.
I've got it cut in a circle.
I've got linen on both sides of it to help give it some strength.
The center piece I shaped up over at Voodoo.
And then I took a peened hammer to it and peened it up a little bit to give it a bit of a forged look.
My handle's cut and I started shaping that.
A little bit more work to do on this, but it's getting there.
I stole one of Buddy's bones.
Don't say anything to him.
I'm going to soak this in water and we're going to use that rawhide around the edge.
Worried about...
No, no, wait. I need that.
It might work alright.
There just ought to be a lot of seams in it.
I do it like this.
I did some tests on soaking.
I hadn't worked with rawhide before and I wanted to see how long it needed to soak to be workable.
Now these strips were cut in 3 inch wide by 36 inch long pieces.
The ounce weight was probably around 4 ounces.
And I let it soak for an hour and 15 minutes.
I found that time to be very manageable and it wasn't really slimy and disgusting to work with.
That's pretty fun, man. That's cool.
Can you imagine carrying this all day long?
I'd have been killed in a minute.
Quite honestly, I'm too lazy I think.
